VonHaus 3515153 Rotary Multitool Instruction Manual
- June 4, 2024
- vonhaus
Table of Contents
3515153 Rotary Multitool
Instruction Manual
3515153 Rotary Multitool
Please read all instructions carefully before use and retain them for future
reference.
CAUTION Sharp edges.
Maintain a safe distance from bystanders.
Protect your hands.
Protect your eyes.
Protect your ears.
Protect your eyes.
PRODUCT DISPOSAL INFORMATION For electrical products sold within the
European Community, at the end of the electrical product’s useful life, it
should not be disposed of with household waste. Please recycle where
facilities exist. Contact your local authority for details of collection
schemes in your area.
In all circumstances:
- Do not dispose of domestic waste.
- Do not incinerate.
- Do not abandon the environment.
- Do not dispose of WEEE as unsorted municipal waste.
Please read all instructions carefully before use and retain them for future
reference.
INTENDED USE
Only operates the power tool/machine for its intended purpose and within the
parameters specified in this manual.
This power tool/machine is for domestic use only. Do not use it outdoors or on
wet surfaces. This power tool/machine is not intended for use by persons with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge unless supervised or given appropriate instruction concerning the
product’s use by a person responsible for their safety.
GENERAL PRECAUTION
Do not allow it to be used as a toy. Children should be supervised to ensure
they do not play with the power tool/machine.
If the power tool/machine is not functioning properly, has been dropped,
damaged, left outdoors, or immersed in liquid, do not use it, contact DOMU
Brands Customer Services.
Do not use the power tool/machine if any parts appear to be faulty, missing,
or damaged. Ensure all parts are securely attached before use.
RISK OF PERSONAL INJURY Avoids body contact with earthed or grounded
surfaces such as pipes, radiators, ranges, and refrigerators. There is an
increased risk of electric shock if your body is earthed or grounded.
Prevent unintentional starting. Ensure the switch is in the off position
before connecting to the power source and/or battery pack, picking up, or
carrying the tool. Carrying power tools with your finger on the switch, or
energizing power tools that are switched on invites accidents.
Do not operate power tools in explosive atmospheres such as in the presence of
flammable liquids, gases, or dust. Power tools create sparks that may ignite
dust or fumes.
Always wear eye protection. Any power tool can throw foreign objects into your
eyes and cause permanent eye damage. Always wear safety goggles (not glasses)
that comply with ANSI safety standard Z87.1. Everyday glasses have only
impact-resistant lenses.
Do not expose power tools to rain or wet conditions. Water entering the power
tools will increase the risk of electric shock.
Stay alert, watch what you are doing, and use common sense when operating a
power tool/machine. Do not use a power tool/machine while you are tired or
under the influence of drugs, alcohol, or medication. A moment of inattention
while operating a power tool/machine may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust masks, non-skid safety shoes, hard hats, or hearing
protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to a power source and/or battery pack, picking up, or
carrying the tool.
Carrying a power tool/machine with your finger on the switch or energizing a
power tool/machine that has the switch on invites accidents.
Remove any adjusting key or spanner before turning the power tool/machine on.
A spanner or a key left attached to a rotating part of the power tool/machine
may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool/ machine in unexpected situations.
Dress appropriately. Do not wear loose clothing or jewelry.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. The use of dust
collection can reduce dust-related hazards.
WORK AREA SAFETY Keep the work area clean and well-lit. Cluttered or dark
areas invite accidents.
Do not operate power tools/machines in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust.
Power tools/machines create sparks that may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool/machine.
Distractions can cause you to lose control.
GENERAL POWER TOOL USE AND CARE Do not force the power tool/machine. Use
the correct power tool/machine for your application. The correct power
tool/machine will do the job better and safer at the rate for which it was
designed.
Do not use the power tool/machine if the switch does not turn on and off. Any
power tool/machine that cannot be controlled with the switch is dangerous and
must be repaired.
Disconnect the plug from the power source and/or the battery pack from the
power tool/machine before making any adjustments, changing accessories, or
storing power tool/machine tools. Such preventive safety measures reduce the
risk of starting the power tool/machine accidentally.
Store idle power tools/machines out of the reach of children and do not allow
persons unfamiliar with the power tool/ machine or these instructions to
operate the power tool/ machine.
Power tools/machines are dangerous in the hands of untrained users.
Maintain power tools/machines. Check for misalignment or binding of moving
parts, breakage of parts, and any other condition that may affect the power
tool/machine’s operation. If damaged, have the power tool/machines repaired
before use. Many accidents are caused by poorly maintained power
tools/machines.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
Use the power tool/machine accessories and tool bits in accordance with these
instructions, taking into account the working conditions and the work to be
performed.
Use of the power tool/machine for operations different from those intended
could result in a hazardous situation.
CLEANING & MAINTENANCE
Never soak or immerse electrical components and or a component that has a plug
attached.
Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
Ensure the motor has fully stopped before cleaning, clearing a blockage,
checking, or carrying out any maintenance on the tool.
Maintain your power tool. Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may affect the power tool’s
operation.
If damaged, have the power tool repaired by a qualified repair person before
use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
Regularly check external nuts and fixings to ensure vibration caused by normal
use has not begun to loosen them. Store idle power tools out of the reach of
children and do not allow persons unfamiliar with the power tool or these
instructions to operate the Breaker.
Locate the power tool out of reach of children, in a dry, locked unit.
Make sure that the cord is located so that it will not be stepped on, tripped
over, or otherwise subjected to damage or stress.
Remove the plug from the main socket/battery (where applicable) before
carrying out any adjustment or maintenance.
Always store the power tool/machine in a dry place. If the power cord is
damaged, it must be replaced by a qualified service technician.
Keep the ventilation slots and motor housing as free of dirt and dust as
possible (where applicable).
Clean the power tool/machine by rubbing it with a clean cloth and blowing it
clean using low-pressure compressed air is recommended.
Ensure you have all the pieces listed. If you are missing any components,
contact our customer services department at
hello@domu.co.uk (UK/EU) or
usasupport@domubrands.com (US). DO NOT
proceed with assembly if any components are missing.
HAND-HELD DIE GRINDERS & SMALL ROTARY TOOL
Use clamps, or another practical way, to secure and support the workpiece to a
stable platform. Holding the workpiece by hand or against your body leaves it
unstable and may lead to loss of control.
Make sure there are no nails or foreign objects in the path of the workpiece
to be cut or sanded.
Be aware of hidden hazards. Before cutting into walls, floors, or ceilings,
check for the location of wiring and pipes. When cutting pipes or conduits,
make sure that they are free from water, electrical wiring, etc.
Keep hands away from the cutting area. Never reach underneath the workpiece
for any reason. Do not insert fingers or thumbs into the vicinity of the
blades/ sanding attachments. The blade will continue to move after releasing
the switch. Always switch the tool off and wait for the blade to come to a
complete standstill before putting the tool down.
Do not touch the workpiece or the blade immediately after operating the tool.
They can become very hot.
TECHNICAL SPECIFICATION
Rated Voltage: 220V-240V
Rated Power: 170W
Rated Frequency: 50Hz
DECLARATION OF CONFORMITY
We
DOMU Brands Ltd
5th Floor The Tower
Deva City Office Park
Manchester
M3 7BF
Declare under our sole responsibility the product:
SKU: 3515153
Description
170W Rotary Multitool with 120pc Accessory Set.
Complies with the essential requirements of the following directives:
2006/42/EC
2014/30/EU
2011/65/EU
And the Standards
BS EN 60745-1:2009+A11:2010,
BS EN 60725-2-23:2013,
EN 55014-1:2006+A1+A2,
EN 55014-2:2015,
EN 61000-3-2:2014,
EN 61000-3-3:2013
Authorized Signatory on behalf of DOMU Brands Ltd.
COMPONENT LIST
- Collet Chuck
- Collet
- Collar
- Spindle Lock Button
- Brush Cap
- Speed Adjustment
- Storage Hook
- On/Off Rocker Switch
COMPONENTS
INSERTING ACCESSORIES
SANDING DRUMS
OPERATION
DISPOSAL INFORMATION
Please recycle where facilities exist. Check with your local authority for
recycling advice.
CUSTOMER SERVICE If you are having difficulty using this product and
require support, please contact hello@domu.co.uk
(UK/EU) or usasupport@domubrands.com (US)
WARRANTY To register your product and find out if you qualify for a free
extended warranty please go to
www.vonhaus.com/warranty. Please retain a
proof of purchase receipt or statement as proof of the purchase date. The
warranty only applies if the product is used solely in the manner indicated in
the warnings page of this manual, and all other instructions have been
followed accurately. Any abuse of the product or the manner in which it is
used will invalidate the warranty. Returned goods will not be accepted unless
re-packaged in their original packaging and accompanied by a relevant and
completed returns form. This does not affect your statutory rights. No rights
are given under this warranty to a person acquiring the appliance second-hand
or for commercial or communal use.
COPYRIGHT All material in this instruction manual is copyrighted by DOMU
Brands. Any unauthorized use may violate worldwide copyright, trademark, and
other laws.
THANK YOU
Thank you for purchasing your product/appliance.
Should you require further assistance with your purchase, you can contact us
at
hello@domu.co.uk (UK/EU)
usasupport@domubrands.com (US)
VonHaus is a registered trademark of DOMU Brands
Ltd. Made in China for DOMU Brands. M24 2RW.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>