TRIPP LITE N236-004-WH Pre Configured Cat 6 Surface Mount Box Owner’s Manual
- June 17, 2024
- Tripp Lite
Table of Contents
Quick Start Guide
Pre-Configured Cat6 Surface-Mount Box
Models: N236-004-WH, N236-006-WH
Note: N236-006-WH model shown in the installation diagrams. Installation for the N236-004-WH model is the same.
Package Contents
- N236-004-WH or N236-006-WH Cat6 Surface-Mount Box
- Double-Sided Tape (x2)
- Cable Ties
- N236-004-WH (x4)
- N236-006-WH (x6)
- Screws (x2)
Installation
- Use a flathead screwdriver to carefully pry apart the unit’s housing.
- Strip the Cat6 cable’s PVC jacket 1 ¼ inches (30 mm). Separate the cable wires into four pairs.
- Follow the instructions on the color code sticker to position T568B or T568A wiring A .Insert the four wire pairs into the slots accordingly B .
- Use a punch-down tool (such as Tripp Lite model N046-000) to complete the terminations and cut off any excess wire.
- Use the included cable ties to secure the Cat6 cables to the unit’s housing.
- Once all cables are secured to the unit’s housing, reattach the unit’s top cover.
Tripp Lite has a policy of continuous improvement. Specifications are subject
to change without notice.
1111 W. 35th Street, Chicago, IL 60609 USA •
www.tripplite.com/support
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value! w
ww.tripplite.com/warranty
http://www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA
•www.tripplite.com/support
Copyright © 2017 Tripp Lite. All rights reserved.
https://manual-hub.com/
Documents / Resources
|
TRIPP LITE N236-004-WH Pre Configured Cat 6 Surface Mount
Box
[pdf] Owner's Manual
N236-004-WH Pre Configured Cat 6 Surface Mount Box, N236-004-WH, Pre
Configured Cat 6 Surface Mount Box, Cat 6 Surface Mount Box, Surface Mount
Box, Mount Box, Box
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>