VonHaus 3515384 246pc Drill Bit Set Instruction Manual
- June 4, 2024
- vonhaus
Table of Contents
VonHaus 3515384 246pc Drill Bit Set
SYMBOLS
| Please read
all instructions carefully before use and retain for future reference.
---|---
| CAUTION Sharp edges
| Protect your hands
| Protect
your eyes
| Basic
safety precautions should always be followed when using hand tools.
---|---
GENERAL PRECAUTIONS
This tool is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience or knowledge,
unless supervised and given appropriate instruction regarding the correct use
of the tool by a person responsible for their safety.
This tool is not a toy. Keep away from children and animals. Children and pets
should be supervised to ensure they are kept away from the work area.
Never use hand tools as power tool accessories. You should never combine the
use of a power tool with a manual tool unless specified as doing so can cause
serious personal injury. Do not use the tool for anything other than its
intended use.
Always secure your workpiece. Smaller workpieces should be secured using a
vice or clamp during use.
WORK AREA SAFETY
Keep your work area clean and well lit. Cluttered or dark areas invite
accidents.
Do not use tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Use of some tools can create sparks which
may ignite the dust or fumes.
Keep children, pets and bystanders away whilst using the tool. Distractions
can cause you to lose control. Shut off any live electrical equipment around
your work area before commencing work with any non-insulated tool. Only use
insulated tools and tools with appropriate IEC/VDE working on live electrical
applications.
BEFORE USE
Do not use hand tools whilst you are tired or under the influence of drugs,
alcohol or medication.
A moment of inattention whilst using tools may result in serious personal
injury.
Use safety equipment. Always wear eye protection. Safety equipment such as a
dust mask, non-skid safety shoes, hard hat, safety gloves or hearing
protection used for appropriate conditions will reduce the risk of personal
injury. Dress appropriately. Do not wear loose clothing or jewellery. Keep
your hair, clothing and gloves away from moving parts. Loose-fitting clothes,
jewellery or long hair can become caught in moving parts.
It is recommended to fully sharpen tools before first use (where applicable).
Become familiar with the tool.
Practice use of the tool on scrap material until you are familiar with the
correct handling, use and limitations of the tool. If devices are provided for
the connection of dust extraction and collection facilities, ensure these are
connected and properly used. Use of these devices can reduce dust-related
hazards.
IMPORTANT SAFETY INFORMATION FOR USE
Use the tool, accessories and tool bits in accordance with these instructions
and in the manner intended for the particular type of tool, taking into
account the working conditions and the work to be performed. Use of the tool
for operations different from those intended could result in a hazardous
situation.
Beware of sharp edges. Handle sharp-edged and pointed tools with care. Ensure
sharp-edged and pointed tools are kept sharp as this will make them easier to
control.
Always cut away from yourself when using cutting or sharp-edged tools.
Always carry sharp-edged and pointed tools by your side with the point and
heavy ends pointing downwards.
Do not force the tool. Always use the correct tool for your application. The
correct tool will do the job better and more safely at the rate for which it
was designed.
Do not overreach. Keep proper footing and balance at all times. This will
enable better control of the tool in unexpected situations.
Always use the correct type of tool for the type of material being worked on.
NOTE The above list is non-exhaustive and is recommended as a basic level of protection for general tasks. Before starting any task, refer to your local hardware store or a professional for advice on which safety equipment would be best suited to the task at hand.
DISPOSAL INFORMATION
Please recycle where facilities exist. Check with your local authority for recycling advice.
CUSTOMER SERVICE
If you are having difficulty using this product and require support, please
contact
hello@domu.co.uk (UK/EU)
usasupport@domubrands.com (US)
WARRANTY
To register your product and find out if you qualify for a free extended
warranty please go to
www.vonhaus.com/warranty. Please
retain a proof of purchase receipt or statement as proof of the purchase date.
The warranty only applies if the product is used solely in the manner
indicated in the warnings page of this manual, and all other instructions have
been followed accurately. Any abuse of the product or the manner in which it
is used will invalidate the warranty.
Returned goods will not be accepted unless re-packaged in its original
packaging and accompanied by a relevant and completed returns form. This does
not affect your statutory rights. No rights are given under this warranty to a
person acquiring the appliance second-hand or for commercial or communal use.
COPYRIGHT
All material in this instruction manual are copyrighted by DOMU Brands.Any unauthorised use may violate worldwide copyright, trademark, and other laws.
THANK YOU
Thank you for purchasing your product/appliance.
Should you require further assistance with your purchase, you can
contact us at
hello@domu.co.uk (UK/EU)
usasupport@domubrands.com (US)
VonHaus is a registered trademark of DOMU Brands
Ltd. Made in China for DOMU Brands. M24 2RW.
Documents / Resources
|
VonHaus 3515384 246pc Drill Bit
Set
[pdf] Instruction Manual
3515384, 246pc Drill Bit Set, 3515384 246pc Drill Bit Set, Drill Bit Set, Bit
Set
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>