SCUBAPRO Easydry Pro Dry Glove Instruction Manual

: June 17, 2024
: SCUBAPRO

Table of Contents

INTRODUCTION
TRIMMING THE SEALS TO FIT
STORAGE & MAINTENANCE
POSSIBLE ALLERGY RISK
SUBSIDIARIES
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SCUBAPRO Easydry Pro Dry Glove

INSTRUCTION MANUAL EASYDRY PRO DRY GLOVE

Welcome to SCUBAPRO and thank you for purchasing our dry suit gloves. This manual provides you with easy access to the key features and functions of our SCUBAPRO dry suit gloves, along with recommendations on how best to don the gloves. Should you wish to know more about SCUBAPRO diving equipment, please visit our website www.scubapro.com

INTRODUCTION

Congratulations on the purchase of high quality SCUBAPRO dry suit gloves.
These gloves are designed for use with drysuits, semi-dry suits and wetsuits. The elastic latex cuff seal ensures the glove is waterproof. If using a wetsuit or semi-dry suit, the seal of the glove is mounted under the suits wrist seal. When using a drysuit, the seal of the glove can be mounted either over or under the suits wrist seal. When you plan diving at deeper depths, the undersuit which must be put under the suits wrist seal so that a part of it remains inside the gloves, this will allow air flow between the gloves and the suit. The gloves are manufactured from high quality vulcanized latex, which gives them a high elasticity and makes them very resistant to puncturing and tearing. The rough surface allows perfect grip with instruments, valves, regulator etc. The anatomic shape of the gloves allows prolonged use without causing increased fatigue.

TRIMMING THE SEALS TO FIT

The latex seals have concentric raised ridges functioning as cutting guides to assist you to accurately trim the seals to fit. The seals are slightly tapered so they get larger when trimmed.
Using a sharp pair of scissors, trim one ring off at a time until the seal is comfortable but still snug on your wrist. Use care and precision with sharp scissors when trimming ridges. Leave a smooth surface as ragged edges can allow tears to form which will require replacement of the seal.

CAUTION
Do not trim too much, or the seals become too loose and may leak. Make sure you cut the seals cleanly and leave no nicks that can develop into a tear.

WARNING
Blood flow can be restricted by seals that are too tight, which can ultimately lead to injury or death. Do not wear the seals too tight.

STORAGE & MAINTENANCE

Store the dry suit gloves in a dry, cool place, between + 5° C and + 20° C, and out of direct sunlight. Ultra-Violet light will degrade the latex over time. If the gloves have been exposed to cold temperatures, they will become stiff and lose their flexibility. This condition is not permanent and can be resolved by a brief immersion in warm water. After diving the gloves should be rinsed in fresh water. Before storing the gloves for any length of time, dust the gloves inside and out with pure talc as a preservative. Do not use perfumed cosmetic talc, as it contains oils which can damage the latex. Do not use oils or lotion on the gloves. Avoid contact with copper.

POSSIBLE ALLERGY RISK

A small percentage of people have an allergic reaction to natural latex, the material from which the gloves are manufactured. This allergy can range from mild to severe skin rash and itching. It is the responsibility of the user to pre-determine if he or she has Latex allergy, or to recognize it during use and discontinue use of the gloves until the problem can be rectified.