VonHaus 2500190 500W Pole Hedge Trimmer Instruction Manual
- June 4, 2024
- vonhaus
Table of Contents
VonHaus 2500190 500W Pole Hedge Trimmer
Please read all instructions carefully before use and retain for future
reference.
Protect your eyes.
CAUTION Sharp edges.
Maintain a safe distance from bystanders.
Please read all instructions carefully before use and retain for future reference.
INTENDED USE
Only operate the power tool/machine for its intended purpose and within the
parameters spec-ified in this manual.
This power tool/machine is for domestic use only. Do not use outdoors or on
wet surfaces.
This power tool/machine is not intended for use by per-sons with reduced
physical, sensory or mental capabil-ities, or lack of experience and
knowledge, unless su-pervised or given appropriate instruction concerning the
product’s use by a person responsible for their safety.
GENERAL PRECAUTION
Do not allow to be used as a toy. Children should be supervised to ensure they
do not play with the power tool/machine.
If the power tool/machine is not functioning properly, has been dropped,
damaged, left outdoors, or immersed in liquid, do not use, contact DOMU Brands
Customer Services.
Do not use the power tool/machine if any parts appear to be faulty, missing or
damaged.
Ensure all parts are securely attached before use.
RISK OF PERSONAL INJURY
Avoid body contact with earthed or grounded surfaces such as pipes ,radiators,
ranges and refrigerators. There is an increased risk of electric shock if your
body is earthed or grounded.
Prevent unintentional starting. Ensure the switch is in the off position
before connecting to the power source and/ or battery pack, picking up or
carrying the tool. Carrying power tools with your finger on the switch, or
energising power tools that are switched on, invites accidents. Do not operate
power tools in explosive atmospheres such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
Always wear eye protection. Any power tool can throw foreign objects into your
eyes and cause permanent eye damage. Always wear safety goggles (not glasses)
that comply with ANSI safety standard Z87.1. Every day glasses have only
impact resistant lenses.
Do not expose power tools to rain or wet conditions. Water entering the power
tools will increase the risk of electric shock.
Stay alert, watch what you are doing and use common sense when operating a
power tool/machine. Do not use a power tool/machine while you are tired or
under the influence of drugs, alcohol or medication. A moment of inattention
while operating power tool/machine may re-sult in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and/or battery pack, picking up or carrying
the tool.
Carrying power tool/machine with your finger on the switch or energizing power
tool/machine that have the switch on invites accidents.
Remove any adjusting key or spanner before turning the power tool/machine on.
A spanner or a key left attached to a rotating part of the power tool/machine
may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool/machine in unexpected situations.
Dress appropriately. Do not wear loose clothing or jew-ellery.
Keep your hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
If devices are provided for the connection of dust extrac-tion and collection
facilities, ensure these are connected and properly used. Use of dust
collection can reduce dust-related hazards.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tool/machine in explosive atmos-pheres, such as in the
presence of flammable liquids, gases or dust.
Power tool/machine create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool/machine.
Distractions can cause you to lose control.
GENERAL POWER TOOL USE AND CARE
Do not force the power tool/machine. Use the correct power tool/ma-chine for
your application. The correct power tool/ma-chine will do the job better and
safer at the rate for which it was designed.
Do not use the power tool/machine if the switch does not turn it on and off.
Any power tool/machine that cannot be controlled with the switch is dangerous
and must be repaired.
Disconnect the plug from the power source and/or the battery pack from the
power tool/machine before making any adjustments, changing accessories, or
storing power tool/machine tools. Such preventive safety measures reduce the
risk of starting the power tool/machine ac-cidentally.
Store idle power tool/machine out of the reach of children and do not allow
persons unfamiliar with the power tool/machine or these instructions to
operate the power tool/machine.
Power tool/machines are dangerous in the hands of un-trained users.
Maintain power tool/machines. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the power
tool/machines operation. If damaged, have the power tool/machines re-paired
before use. Many accidents are caused by poorly maintained power
tool/machines.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edg-es are less likely to
bind and are easier to control.
Use the power tool/machine accessories and tool bits in accordance with these
instructions, take into account the working conditions and the work to be
performed. Use of the power tool/machine for operations different from those
intended could result in a hazardous situation.
CLEANING & MAINTENANCE
Never soak or immerse electrical components and or a component that has a plug
attached.
Disconnect the plug from the power source before mak-ing any adjustments,
changing accessories, or storing. Such preventive safety measures reduce the
risk of start-ing the power tool accidentally.
Ensure the motor has fully stopped before cleaning, clearing a blockage,
checking, or carrying out any main-tenance on the tool.
Maintain your power tool. Check for misalignment or binding of moving parts,
breakage of parts and any oth-er condition that may affect the power tool’s
operation. If damaged, have the power tool repaired by a qualified repair
person before use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
Regularly check external nuts and fixings to ensure vibra-tion caused by
normal use has not begun to loosen them. Store idle power tools out of reach
of children and do not allow persons unfamiliar with the power tool or these
instructions to operate the Breaker.
Locate the power tool out of reach of children, in a dry, locked unit.
Make sure that the cord is located so that it will not be stepped on, tripped
over, or otherwise subjected to dam-age or stress.
Remove the plug from the mains socket / battery (where applicable) before
carrying out any adjustment or main-tenance.
Always store the power tool/machine in a dry place.
If the power cord is damaged, it must be replaced by a qualified service
technician.
Keep the ventilation slots and motor housing as free of dirt and dust as
possible (where applicable).
Clean the power tool/machine by rubbing it with a clean cloth and blow it
clean using low-pressure compressed air is recommended.
Ensure you have all the pieces listed. If you are miss-ing any components,
contact our customer services department at hello@domu.co.uk (UK/EU)
usasuport@ domubrands.com (US). DO NOT proceed with assembly if any components
are missing.
HAND HELD HEDGE TRIMMERS
Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s operation.
Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
Hold power tool by insulated gripping surfaces, when performing an operation
where the cutting accesso-ry may contact hidden wiring or its own cord.
Cutting accessory contacting a “live” wire may make exposed metal parts of the
power tool “live” and could give the operator an electric shock.
Keep hands away from cutting area. Never reach under-neath the workpiece for
any reason. Do not insert fingers or thumb into the vicinity of the blade and
blade release switch.
TECHNICAL SPECIFICATION
- Rated Voltage 230-240V
- Rated Power 500W
- Rated Frequency 50Hz
COMPONENT LIST
- Dual Action Cutting Blades
- Safety Guard
- Connection
- Rotation Button
- Telescopic Pole
- Telescopic Dial
- Hex Key
- Shoulder Support Strap
- Cable Relief
- Safety Switch
- Rear Handle
- On/Off Trigger
- Blade Cover
- Support Strap
ASSEMBLY
ADJUSTMENTS
WORKING POSITION
DISPOSAL INFORMATION
Please recycle where facilities exist. Check with your local authority for recycling advice.
CUSTOMER SERVICE If you are having difficulty using this product and
require support, please contact hello@domu.co.uk
(UK/EU)
usasupport@domubrands.com (US)
WARRANTY
To register your product and find out if you qualify for a free extended
warranty please go to
www.vonhaus.com/warranty. Please retain a
proof of purchase receipt or statement as proof of the purchase date. The
warranty only applies if the product is used solely in the manner indicated in
the warnings page of this manual, and all other instructions have been
followed accurately. Any abuse of the product or the manner in which it is
used will invalidate the warranty. Returned goods will not be accepted unless
re-packaged in its original packaging and accompanied by a relevant and
completed returns form. This does not affect your statutory rights. No rights
are given under this warranty to a person acquiring the appliance second-hand
or for commercial or communal use.
COPYRIGHT All material in this instruction manual are copyrighted by DOMU
Brands. Any unauthorized use may violate worldwide copyright, trademark, and
other laws.
THANK YOU
Thank you for purchasing your product/appliance. Should you require further
assistance with your purchase, you can contact us at
hello@domu.co.uk (UK/EU)
usasupport@domubrands.com (US)
VonHaus is a registered trademark of DOMU Brands Ltd. Made in China for DOMU
Brands. M24 2RW.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>