VonHaus 3500068 99pc Cobalt Drill Bit Set Instruction Manual
- June 4, 2024
- vonhaus
Table of Contents
VonHaus 3500068 99pc Cobalt Drill Bit Set Instruction Manual
Symbols
-
Please read all instructions carefully before use and retain for future reference.
-
Wear a dust mask.
-
CAUTION Sharp edges.
-
Protect your hands.
-
Protect your eyes.
Basic safety precautions should always be followed when using hand tools.
GENERAL PRECAUTIONS
This tool is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience or knowledge,
unless supervised and given appropriate instruction regarding the correct use
of the tool by a person responsible for their safety. This tool is not a toy.
Keep away from children and animals. Children and pets should be supervised to
ensure they are kept away from the work area. Never use hand tools as power
tool accessories. You should never combine the use of a power tool with a
manual tool unless specified as doing so can cause serious personal injury. Do
not use the tool for anything other than its intended use.
Always secure your workpiece. Smaller workpieces should be secured using a
vice or clamp during use.
WORK AREA SAFETY Keep your work area clean and well lit. Cluttered or
dark areas invite accidents. Do not use tools in explosive atmospheres, such
as in the presence of flammable liquids, gases or dust. Use of some tools can
create sparks which may ignite the dust or fumes.
Keep children, pets and bystanders away whilst using the tool. Distractions
can cause you to lose control. Shut off any live electrical equipment around
your work area before commencing work with any non-insulated tool. Only use
insulated tools and tools with appropriate IEC/VDE working on live electrical
applications.
BEFORE USE Do not use hand tools whilst you are tired or under the
influence of drugs, alcohol or medication. A moment of inattention whilst
using tools may result in serious personal injury. Use safety equipment.
Always wear eye protection. Safety equipment such as a dust mask, non-skid
safety shoes, hard hat, safety gloves or hearing protection used for
appropriate conditions will reduce the risk of personal injury. Dress
appropriately. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose-fitting clothes, jewellery
or long hair can become caught in moving parts. It is recommended to fully
sharpen tools before first use (where applicable). Become familiar with the
tool.
Practice use of the tool on scrap material until you are familiar with the
correct handling, use and limitations of the tool. If devices are provided for
the connection of dust extraction and collection facilities, ensure these are
connected and properly used. Use of these devices can reduce dust-related
hazards.
IMPORTANT SAFETY INFORMATION FOR USE Use the tool, accessories and tool
bits in accordance with these instructions and in the manner intended for the
particular type of tool, taking into account the working conditions and the
work to be performed. Use of the tool for operations different from those
intended could result in a hazardous situation.
Stay alert, watch what you are doing, and use common sense when using the
tool. Beware of sharp edges. Handle sharp-edged and pointed tools with care.
Ensure sharp-edged and pointed tools are kept sharp as this will make them
easier to control. Always cut away from yourself when using cutting or sharp-
edged tools.
Always carry sharp-edged and pointed tools by your side with the point and
heavy ends pointing downwards. Do not force the tool. Always use the correct
tool for your application. The correct tool will do the job better and more
safely at the rate for which it was designed. Do not overreach. Keep proper
footing and balance at all times. This will enable better control of the tool
in
unexpected situations.
Always use the correct type of tool for the type of material being worked on.
NOTE The above list is non-exhaustive and is recommended as a basic level
of protection for general tasks. Before starting any task, refer to your local
hardware store or a professional for advice on which safety equipment would be
best suited to the task at hand.
DISPOSAL INFORMATION
Please recycle where facilities exist. Check with your local authority for recycling advice.
CUSTOMER SERVICE
If you are having difficulty using this product and require support, please
contact
hello@domu.co.uk (UK/EU)
usasupport@domubrands.com (US)
WARRANTY
To register your product and find out if you qualify for a free extended warranty please go to www.vonhaus.com/warranty. Please retain a proof of purchase receipt or statement as proof of the purchase date. The warranty only applies if the product is used solely in the manner indicated in the warnings page of this manual, and all other instructions have been followed accurately. Any abuse of the product or the manner in which it is used will invalidate the warranty. Returned goods will not be accepted unless re-packaged in its original packaging and accompanied by a relevant and completed returns form. This does not affect your statutory rights. No rights are given under this warranty to a person acquiring the appliance sec- ond- hand or for commercial or communal use.
COPYRIGHT All material in this instruction manual are copyrighted by DOMU Brands.Any unauthorised use may violate worldwide copyright, trademark, and other laws.
THANK YOU
Thank you for purchasing your product/appliance. Should you require further
assistance with your purchase, you can contact us at
hello@domu.co.uk (UK/EU)
usasupport@domubrands.com (US)
VonHaus is a registered trademark of DOMU Brands
Ltd. Made in China for DOMU Brands. M24 2RW
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>