V-TAC VT-6076 LED Batten Waterdichte Fitting Instruction Manual
- June 17, 2024
- V TAC
Table of Contents
V-TAC VT-6076 LED Batten Waterdichte Fitting
Product Information
Specifications:
Model| SKU| Beam Watts| Lumens| Angle| DF| CRI| Input Power| Life Span
[Hours]| ON/OFF Cycle| Max Connectable Units| Dimension| Material
---|---|---|---|---|---|---|---|---|---|---|---|---
VT-6076| 216282 216283| 18W| 2160LM| 0.7| 80| AC: 220-240 50/60Hz| 25,000|
15000| 16| 600x66x58mm| PC
VT-1249| 216284 216285| 36W| 4320LM| 0.9| 80| AC: 220-240 50/60Hz| 25,000| 15000| 8| 1200x66x58mm| PC
VT-1574| 216286 216287| 48W| 5760LM| 0.9| 80| AC: 220-240 50/60Hz| 25,000| 15000| 6| 1500x66x58mm| PC
Product Usage Instructions
- Introduction & Warranty:
- WARNING!
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similarly qualified person to avoid a hazard.
- Terminal block not included. To be connected with a Waterproof Cable Hose.
- This marking indicates that this product should not be disposed of with other household wastes.
- Caution, risk of electric shock.
- Installation Instruction:
- Switch OFF the power before starting the installation.
- Fasten the two mounting clips to the installation surface.
- Open the end cap and take out the connector (FIG 1).
- Link to a power source (FIG 2).
- Cover back end cap.
- Install the lamp to the mounting clips (FIG 3).
- Hanging installation type reference (FIG 4).
- Switch ON the power to test the light.
- Note: This product has a non-replaceable control gear and a non-replaceable light source.
FAQs
- Q: What should I do if I have any queries or issues with the product?
- A: Please reach out to us at support@v-tac.eu. for assistance.
- Q: Where can I find more products from V-TAC?
- A: For more product range and inquiries, please contact our distributor or nearest dealers.
TECHNICAL DATA
MODEL| SKU| WATTS| LUMENS| BEAM ANGLE| DF| CRI| INPUT POWER| LIFE SPAN
[Hours]| ON/OFF CYCLE| MAX CONNECTABLE UNITS| DIMENSION| MATERIAL
---|---|---|---|---|---|---|---|---|---|---|---|---
VT-6076| 216282 216283| 18W| 2160LM| 120°| ≥0.7| ≥80| AC: 220-240 50/60Hz|
25,000| >15000| 16| 600x66x58mm| PC
VT-1249| 216284 216285| 36W| 4320LM| 120°| ≥0.9| ≥80| AC: 220-240 50/60Hz|
25,000| >15000| 8| 1200x66x58mm| PC
VT-1574| 216286 216287| 48W| 5760LM| ****
120°
| ≥0.9| ≥80| AC: 220-240 50/60Hz| 25,000| >15000| 6| 1500x66x58mm| PC
INTRODUCTION & WARRANTY
- Thank you for selecting and buying the V-TAC product.
- V-TAC will serve you the best.
- Please read these instructions carefully before starting the installation and keep this manual handy for future reference.
- If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product.
- They are trained and ready to serve you at your best.
- The warranty is valid for 2 years from the date of purchase.
- The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear.
- The company gives no warranty against damage to any surface due to incorrect removal and installation of the product.
- The products are suitable for 10-12 Hours Daily operation.
- Usage of the product for 24 Hours a day would void the warranty.
- This product is warranted for manufacturing defects only.
WARNING!
- Please make sure to turn o– the power before starting the installation.
- Installation must be performed by a qualified electrician.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person to avoid a hazard.
- Terminal block not included. To be connected with a Waterproof Cable Hose
- This marking indicates that this product should not be disposed of with other household wastes.
- Caution, risk of electric shock.
INSTALLATION INSTRUCTION
- Switch OFF the power before starting the installation.
- Fasten the two mounting clips to the installation surface.
- Open the end cap and take out the connector (FIG 1).
- Link to a power source (FIG 2).
- Cover back end cap
- Install the lamp to the mounting clips (FIG 3).
- Hanging installation type reference (FIG 4).
- Switch ON the power to test the light.
INSTALLATION DIAGRAM
LINKABLE CONNECTION
- IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU.
- FOR MORE PRODUCT RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
- V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
- WEEE Number: 80133970
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>