NEEWER A111 smartphone cage type LED light Instruction Manual
- June 5, 2024
- NEEWER
Table of Contents
NEEWER A111 smartphone cage type LED light
Copyright
2021 Shenzhen Neewer Technology Co., Ltd. All Rights Reserved. This document
is the sole property of Shenzhen Neewer Technology Co., Ltd and shall not be,
reproduced, transmitted, transcribed, stored in a retrieval system or
translated in any form, by any means, withoutprior written permission trom
Shenzhen Neewer Technology Co., Ltd. Shenzhen Neewer Technology Co., Ltd
reserves the right to change content in this instruction manual at any time
and without prior notice.
Product Overview
Thank you for purchasing the NEEWER° Alll Smartphone cage type LED light.
The Al11 Fill Light features 240 LED bulbs, with an adjustable brightness
range of 0%-100% and a color temperature range of 3200~560OK. Connect your
mobile phone via Bluetooth to control and take pictures or shoot videos.
Supplied with two 2600 mAh F550 batteries, it’s the perfect accessory for
live, outdoor shooting.
Package Contents
Product illustration
- Light diffusion panel
- Color temperature adjustment dial
- Phone control buttons
- Display screen
- Battery compartment
- Mobile phone holder mount
- Power switch
- Brightness adjustment dial
- Power jack
Assembly Instructions
Attaching the phone holder
- Remove the adjustable screw from the rig by turning Counterclockwise.
- Unscrew the screw on the holder completely to allow you to reattach to the support bracket.
- Attach the bracket to the base of the Smartphone holder as shown and turn clockwise to secure.
- Mount the mobile phone holder mount on the fill light, and tighten the adjustable knob clockwise to secure.
Please ensure the phone holder is installed in the corect direction.
To mount the phone
Insert the phone into the holder as shown.
Instructions for use
-
Powering the fill light
Option 1: The light can be powered usinga dedicated battery. Insert a Compatible battery into the compartment to use this power source.
Option 2: The light can be powered using the DC9-12V power adapter. Plug the connector into the light’s input hole and the other end into a mains power supply.
The power adapter is not included in the accessories -
Getting started
-
To turn the panel light on/off. Flick the power switch to the “ON” position to turn on, and to the “OFF” position to turn off. When the device is turned on, the display will light up and the Bluetooth icon will flash. A flashing Bluetooth icon indicates that no Bluetooth-enabled device has been connected.
-
Brightness
Turn the “DIM” dial to adjust the brightness from 0% up to the maximum brightness level of 100%. -
Color temperature
Turn the “CCT” dial to adjust the color temperature. The lowest color temperature is 3200K (warm), and the highest color temperature is 5600K (ocold).
-
-
The fill light can control the phone via Bluetooth
- Turn on the unit using the power switch. The display is on, and the Bluetooth icon should be flashing
- Turn on the Bluetooth function on your mobile phone, search for devices, and select “NEEWER- Shutter” to connect. The on-screen Bluetooth icon will cease flashing once a successful connection has been made.
- Open up the camera on your mobile phone to use the camera or video function and click the “ ” button to control the mobile phone to take pictures or video.
When the camera or video function of the mobile phone is not used, press the “ “button to adjust the volume of the mobile phone.
-
Charging batteries
When the battery power is getting low, use the suppliedcharger to charge the battery. When the charger indicator is red, it indicates the battery is charging and will turn green once the battery is fully charged.
Safety Notes
- Any mobile phones, or power adapters shown are for illustrative purposes only and need to be purchased separately.
- Please do not drop the product to prevent damage to the light or its Components resulting from a strong impact. Please do not look directly at the fill light when in use as direct exposure to the light may cause visual impairment.
- Do not store the product near inflammable or volatile substances.
- Do not use the product in the rain or a wet environment.
- When not in use, please turn off the power and remove the battery.
- When not in use, please keep the product in a well-ventilated, dry place away from heat sources and magnetic fields.
Product Specifications
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>