Paulmann 924.66 LED Module Recessed Luminaire Smart Home Zigbee Basic Set Installation Guide

June 16, 2024
Paulmann

Paulmann 924.66 LED Module Recessed Luminaire Smart Home Zigbee Basic Set

Paulmann-924-66-LED-Module-Recessed-Luminaire-Smart-Home-Zigbee-Basic-Set-
product

Product Information

Specifications

  • Model Numbers: 924.66, 924.67, 924.68, 924.70
  • Dimensions: 68-73mm (Diameter)
  • IP Rating: IP20 (Indoor use), IP23 (Outdoor use)
  • Parallelable: Yes
  • Wire Thickness Range: 3-6mm

Frequently Asked Questions

  • Q: How many models are available for this product?
    • A: There are four models available: 924.66, 924.67, 924.68, and 924.70.
  • Q: Can I use this product outdoors?
    • A: Yes, you can use the IP23 rated variant of this product outdoors.
  • Q: How do I perform a factory reset?
    • A: To perform a factory reset, press the “Factory Reset” button on the product.
  • Q: What is the wire thickness range supported by this product?
    • A: This product supports wire thickness ranging from 3mm to 6mm.

Product Usage Instructions

Installation

  1. Ensure that the power is switched off before installation.
  2. Select the appropriate model number based on your requirements.
  3. If installing outdoors, make sure to use the IP23 rated variant.
  4. Take the product out of the packaging and inspect for any damages.
  5. Position the product in the desired location and mark the mounting points.
  6. Using appropriate tools, mount the product securely to the designated surface.
  7. Connect the wires to the corresponding terminals, ensuring proper polarity.
  8. Double-check all connections and tighten any loose screws or terminals.

Usage

To use the product:

  1. Ensure that the power is switched on.
  2. Refer to the provided manual or visit www.paulmann.com/symbols for symbol explanations.
  3. To turn on the product, press the “on” button.
  4. To turn off the product, press the “off” button for more than 3 seconds.
  5. To perform a factory reset, press the “Factory Reset” button.
  6. Adjust the brightness or other settings as per your preference using the provided buttons.

More Information

Features

Paulmann-924-66-LED-Module-Recessed-Luminaire-Smart-Home-Zigbee-Basic-Set-
fig-1

Art.-Nr.: 924.66

  • 924.67
  • 924.68
  • 924.70

What In The Box

Paulmann-924-66-LED-Module-Recessed-Luminaire-Smart-Home-Zigbee-Basic-Set-
fig-3

Dimensions

Paulmann-924-66-LED-Module-Recessed-Luminaire-Smart-Home-Zigbee-Basic-Set-
fig-4 Paulmann-924-66-LED-Module-Recessed-Luminaire-Smart-Home-Zigbee-Basic-Set-
fig-5

Installation Instructions

Paulmann-924-66-LED-Module-Recessed-Luminaire-Smart-Home-Zigbee-Basic-Set-
fig-6 Paulmann-924-66-LED-Module-Recessed-Luminaire-Smart-Home-Zigbee-Basic-Set-
fig-7 Paulmann-924-66-LED-Module-Recessed-Luminaire-Smart-Home-Zigbee-Basic-Set-
fig-8

Information

Paulmann-924-66-LED-Module-Recessed-Luminaire-Smart-Home-Zigbee-Basic-Set-
fig-12

Remote Using Instructions

Paulmann-924-66-LED-Module-Recessed-Luminaire-Smart-Home-Zigbee-Basic-Set-
fig-9

Add more Functions

Paulmann-924-66-LED-Module-Recessed-Luminaire-Smart-Home-Zigbee-Basic-Set-
fig-10

Approved for operating in all European countries

  1. 2,4 GHz –
  2. 2,4835 GHz
  • Doesn’t apply for the geographical area within a radius of 20km from the centre on “Ny Alesund”

Paulmann Licht hereby declares that the radio system type [924.66_924.67_924.68_924.70 ] of the directive 2014/53/EU complies. The full text of the EU declaration of conformity is available at the following internet address: www.paulmann.com/ce Radio frequency [2.4 GHz 2.4835 GHz] Radiated energy [10 mW]

Replaceability

Paulmann-924-66-LED-Module-Recessed-Luminaire-Smart-Home-Zigbee-Basic-Set-
fig-13

(1) Light source or (4) operating device can be replaced by end users without permanent damage to the luminaire. (2) Light source or (5) operating device can be replaced by a qualified electrician without permanently damaging the luminaire. (3) Light source or (6) operating device is not replaceable, the luminaire must be replaced.

www.paulmann.com/symbols

Disposal: Old devices must not be disposed of in the residual waste. You can do so at public waste collection points be delivered. Old batteries and accumulators, as well as lamps can be removed from the old device in a non- destructive manner before handing it over to a collection point separate from the old device. Distributors are within the scope of Section 17 Paragraphs 1 and 2 ElektroG obligated to take back this product free of charge. End users of old devices must take their own responsibility ensure the deletion of personal data on the old devices to be disposed of www.paulmann.com

This product contains a light source with energy efficiency class .

Paulmann Licht GmbH

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals