anko SLR-23052 LED Neon Dinosaur Instruction Manual

anko SLR-23052 LED Neon Dinosaur

Product Information

Specifications

• Product Name: LED Neon Dinosaur
• Model Number: SLR-23052
• Power Source: USB or 3 x 1.5V AAA batteries (not included)

Important Safety Instructions

The following safety precautions should always be followed to reduce the risk of electric shock, personal injury, or fire:

1. This product must only be used as intended by the enclosed operating instructions.
2. If the external flexible cable or cord of this luminaire is damaged, this product should be discarded.
3. If the luminaire stops unexpectedly or appears to malfunction, unplug the USB plug and stop using it immediately. Seek professional advice for repairs.
4. Unplug the USB plug when not in use, before cleaning, or changing accessories.
5. Keep the luminaire and cable away from sources of heat, sharp objects, or anything that may cause damage.
6. Be aware that some surfaces may become hot. Do not touch hot surfaces and supervise others accordingly.
7. This product has not been designed for use by children. Children should be closely supervised at all times when they are near any electrical appliance.
8. To protect against electric shock, never allow the luminaire to come into contact with water or any other liquid.
9. Never use this luminaire if it has fallen into the water. Do not reuse until the product has been inspected and approved by a professional.

Additional Safety Precautions for Lighting

1. Although the product does not generate a great amount of heat, it is recommended that you do not cover or conceal it.
2. Do not use the product if the outer PVC jacket is damaged, there are loose connections, or if the wire is visible without insulation.
3. Do not operate/run LED flex neon in temperatures exceeding 115°F (45°C).
4. Do not operate LED flex neon over the specified voltage or LED life degradation will be greatly increased.
5. Ensure secure attachment to the wall. Consult a DIY expert if required.

Product Usage Instructions

Assembly

1. Display the LED neon sign in the desired location.

Power Source

If using USB:

2. Insert the USB plug into the USB socket or alternative power source. Please pay attention to the electrical parameters of the power source as required.

If using batteries

3. Insert 3 x 1.5V AAA batteries (not included) into the battery compartment. Please pay attention to the battery polarity.

Switch

The toggle switch is located on the side of the battery box.

• If using USB, push the switch to the “USB” gear.
• If using batteries, push the switch to the “BO” gear.

FAQ

• Q: Can I use different types of batteries?

• A: No, never mix different types of old and new batteries.
  Follow the instructions and use 3 x 1.5V AAA batteries.

• Q: Can I dispose of the batteries in the fire?

• A: No, do not short-circuit supply terminals or dispose of batteries in a fire. Follow proper disposal guidelines for batteries.

• Q: Is the LED replaceable?

• A: No, the multicoloured LED is nonreplaceable.

• Q: Is this product safe for children and pets?

• A: No, this product is not a toy. Keep it away from children and pets.

IMPORTANT SAFETY INSTRUCTIONS

The following safety precautions should always be followed, to reduce the risk of electric shock, personal injury or fire. It is important to read all of these instructions carefully before using the product and to save them for future reference or new users.

1. This product must only be used as intended by the enclosed operating instructions.
2. If the external flexible cable or cord of this luminaire is damaged, this product should be discarded
3. If the luminaire stops unexpectedly or appears to malfunction, plug off the USB plug and stop using it immediately. Seek professional advice to rectify the fault or make repairs.
4. Plug off the USB plug when not in use, before cleaning or changing accessories.
5. Keep the luminaire and cable away from sources of heat, sharp objects or anything that may cause damage.
6. Be aware that some surfaces may become hot. Do not touch hot surfaces and supervise others accordingly.
7. This product has not been designed for use by children. Children should be closely supervised at all times when they are near any electrical appliance.
8. To protect against electric shock, never allow the luminaire to come into contact with water or any other liquid.
9. Never reach this luminaire that has fallen into the water. Do not re-use until the product has been inspected and approved by a qualified electrician.
10. Do not use outdoors. This luminaire has been designed for domestic indoor use only.
11. Use only a microfiber and dry cloth for cleaning the product.
12. Operate carefully to not cause any damage by dropping or physically shocking it.
13. Do not leave the product in excessive heat, high temperatures can cause the product to malfunction.
14. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.

ADDITIONAL SAFETY PRECAUTIONS FOR LIGHTING

1. Although products do not generate a great amount of heat, it is recommended that you do not cover or conceal it.
2. Do not use the product if the outer PVC jacket is damaged, loose connections, or if the wire is visible without insulation.
3. Do not operate/run LED flex neon in temperatures exceeding 115F (45 ℃)
4. Do not operate LED flex neon over the specified voltage or LED life degradation will be greatly increased.
5. Ensure secure attachment to the wall. Consult a DIY expert if required.

CAUTION

• REQUIRES 3 X 1.5V AAA BATTERIES NOT INCLUDED.
• BATTERY INSTALLATION BY AN ADULT IS REQUIRED.
• OPERATING AND CARE INSTRUCTIONS.
• NEVER MIX DIFFERENT TYPES OF OLD AND NEW BATTERIES.
• DO NOT SHORT-CIRCUIT SUPPLY TERMINALS OR DISPOSE OF BATTERIES IN FIRE.
• REMOVE BATTERIES DURING LONG PERIODS OF NONUSE.
• MULTICOLOURED LED NONREPLACEABLE.
• FOR DECORATION ONLY. THIS IS NOT A TOY. KEEP AWAY FROM CHILDREN AND PETS.

Product specification

• USB input: 5V DC 1000mA or 3*1.5V AA batteries (not included)
• Bulb rating: LED Max 1W

INSTRUCTIONS FOR ASSEMBLY

1. Display the LED neon sign in the desired location.
2. Insert the USB plug into the USB socket or alternative power source. Please attention to the electrical parameters of the power source as a requirement.
3. If using battery-operated, insert 3*1.5V AA batteries (not included) into the battery compartment. Please attention to the battery polarity.
4. The toggle switch is on the side of the battery box. If USB operated, push the switch to USB gear. If the battery is operated, push the switch to BO gear.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>