anko 23BF02 Bluetooth Headphone Instruction Manual

anko 23BF02 Bluetooth Headphone

Product Information

Specifications

• Model : 23BF02
• Power Supply : 5V d.c. 1A (Do not exceed this power supply source)
• Mounting Height : Less than 2m

Usage Instructions

Important Safety Information

• The battery should not be exposed to high or low extreme temperatures, low air pressure at high altitude during use, storage, or transportation.
• Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery as it may result in an explosion.
• Avoid leaving the battery in an extremely high-temperature environment that can lead to an explosion or the leakage of flammable liquid or gas.
• Do not expose the battery to extremely low air pressure as it may cause an explosion or the leakage of flammable liquid or gas.
• The apparatus is only suitable for mounting at a height less than 2m.
• Refer to the marking located on the bottom of the apparatus for additional information.

Contact Information

• Contact for Kmart purchases:
• Kmart Australia Ltd. C/- Customer Service Centre
• 690 Springvale Road, Mulgrave Vic 3170
• Customer Service: 1800 124 125 (Australia) or 0800 945 995 (New Zealand)
• Customer Help : kmart.com.au
• Contact for Target purchases:
• Target Australia Pty Ltd C/- Customer Service Centre
• 2 Kendall Street, Williams Landing, Vic, 3027
• Customer Service : 1300 753 567
• Customer Help: target.com.au/help/contact-us

FAQ

1. Q: How do I power on/off the headphones?
   A: To power on the headphones, press and hold the power button until you hear a voice indication tone. To power off the headphones, press and hold the power button again until you hear a voice indication tone.

2. Q: How do I control the volume and skip tracks?
   A: Use the volume buttons (Vol- and Vol+) to adjust the volume. To skip to the next track, use the next track button. These buttons are located on the headphone itself.

3. Q: Can I use the headphones to answer or hang up calls?
   A: Yes, the headphones have a power button that can be used to answer or hang up calls. Press the power button once to answer a call and press it again to hang up.

4. Q: Is there a USB charging port on the headphones?
   A : Yes, there is a USB charging port available for charging the headphones. Simply connect the headphones to a compatible USB power source using a USB cable.

Bluetooth® headphone Operating instructions includes:

• Bluetooth headphone
• Charging cable
• use manual
• Audio cable

12-month warranty

• Thank you for your purchase.

• Your new product is warrantied to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. This warranty is in addition to your rights under the Australian Consumer Law.

• For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.

• We will provide you with your choice of a refund, repair (where possible) or exchange
  (availability dependent) for this product if it becomes defective within the warranty period. The business will bear the reasonable expense of claiming the warranty.

• This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse or neglect.

• Please retain your receipt as proof of purchase and contact our Customer Service Centre as listed below, for the entity you purchased this product from, for any difficulties with your product. Warranty claims and claims for expense incurred in returning this product can be addressed to the respective Customer Service Centre.

• Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Statement

• This product shall not be connected to power supply source exceeding PS1 (5V d.c. 1A).
• Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
• The apparatus is only suitable for mounting at height < 2m.
• The marking located on the bottom of the apparatus.

Function overview

How to use these headphone:

• Function Operation
• Pause click  O button
• Play click O button
• Next Song press and hold + button
• Previous Song press and hold – button
• Volume Up click button +when the  volume is adjusted to maximum you will hear a tone notification
• Volume Down click – button
• Power ON / OFF
• Power ON
  • Press and hold power button 2s.You will hear a voice indication tone
• Power OFF
  • Press and hold power button 3s.You will hear a voice indication tone

Specifications

• Model No:
  • 23BF02
• Version:
  • V5.0
• Support profiles:
  • A2DP, AVRCP, HFP
• Working Distance:
  • 10 meters
• Music Time:

  • 8 Hours

• Talk time:

  • 8 Hours

• Standby time:

  • 100 Hours

• Charging voltage:
  • 5V d.c.
• Charge time:
  • 2 Hours
• Pairing window time:
  • 5 minutes

Pairing the earphone with Bluetooth devices

• Once the earphone is powered on, it is in pairing mode (LED flashes red and blue ) and will pair to the last paired device (if available).
• Pair the earphone in Bluetooth menu in mobile phone and once it is paired, you can hear a pairing tone and the led will.
• Bluetooth Name:
  • ‘anko43351701’ or ‘anko43351718’

Battery Charging
This Bluetooth earphone is powered by rechargeable Li-ion battery. Please use the accessory USB cable to recharge the battery.

• Insert USB charging cable into a suitable USB port.
• Connect charging cable with the headset USB port .
• Indicator LED turns RED to show battery is charging.
• Indicator LED turns when battery is fully charged.
• It takes about 2 hours to full charge the battery

Phone calls

• Press button to pick up/hang up phone calls.
• Press and hold the button 1s reject the calls

Playing music
When the earphone connects with the mobile phone via Bluetooth you can enjoy music through the earphone earphone wirelessly.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc., and any use of such marks by KMART AUSTRALIA is under licence.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>