anko HQ500B Bluetooth Headphone User Manual

Model: HQ500B
K: 43-351-732 | T: 68-734-640
Bluetooth Headphone
User Manual

HQ500B Bluetooth Headphone

Accessories inside:

• Type-C charging cable x 1
• 3.5mm audio cable x1
• User manual x 1

Function overview

1. Volume up/ Next song
2.  MFB button
3. Volume down/Previous song
4. Bluetooth indicator
5. Power on/off & EQ button
6. 3.5mm jack input
7. Type C charging port
8. Microphone

Specification

Operation Instruction

Power on/off

• Turn on: In power-off status, press and hold the power on button 2s, the blue light will be on around 2 seconds, then blue and red light will flash alternately, the headphone enter into pairing mode.
• Turn off: In power-on status, press and hold the power off button 3s, the indicator light will turn off .

Pairing
Turn on the Bluetooth switch of the mobile phone or other devices(such as PC,Tablet etc), search
for the pairing name anko43351732 in your mobile Bluetooth list, click it to connect the
headphone with your device; Once paired successfully, a voice prompt will alert and the blue
indicator flashes slowly every 6 seconds .
EQ mode
There’re three kinds of EQ for your option, click the EQ button to switch EQ mode you need,
there’s voice prompt to help you to choose the mode .
1)Bass mode; 2) Pop mode; 3) Vocal mode
Music playing
Volume up: Click the “+” button to increase volume ; Volume down: Click the “-” button to
decrease volume ; Next song: Press and hold the “+” button around 2 seconds ; Previous song:
Press and hold the “-” button around 2 seconds ; Music play/pause: Click the MFB button .
Phone Calling
Answer call: Click the MFB button when call is coming ;
End call: Click the MFB button when call is over
Cancel call: Click the MFB button when calling
Reject call: Press and hold the MFB button around 2 seconds when call is coming
Redial: Double click the MFB button to redial last call number
Siri or google assistant
In standby mode or music mode, long press MFB button 2 seconds to activate Siri or Google
assistant.
AUX mode
Connect one end of the 3.5mm audio cable into the audio jack of the headphone , Connect the other end into your mobile or other devices, then play music directly.
Note: The headphone will be power off once plug the 3.5mm audio cable into audio jack(When headphone is power on). If you need to turn on the headphone, the 3.5mm audio cable must be taken out from the headphone.
Reset (to clear the paired device information in headphone)
To disconnect the headphone with other devices, press and hold the “+” and ”-” button at the same time around 3 seconds until the red and blue indicator blink alternately, then headphonecould pair with new devices.
Charging
Before using, please check and assure the battery is full charged. While the headphone is in low battery, please use Type-C charging cable to charge and the charging indicator will be red when charging. Once it’s fully charged, the indicator will be solid blue.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc., and any use of such marks by KMART AUSTRALIA is under license
12 month warranty
Thank you for your purchase.
Your new product is warrantied to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. This warranty is in addition to your rights under the Australian Consumer Law. For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.
We will provide you with your choice of a refund, repair (where possible) or exchange (availability dependent) for this product if it becomes defective within the warranty period. The business will bear the reasonable expense of claiming the warranty. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer Service Centre as listed below, for the entity you purchased this product from, for any diculties with your product. Warranty claims and claims for expense incurredin returning this product can be addressed to the respective Customer Service Centre.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Kmart Australia Ltd.
C/- Customer Service Centre
690 Springvale Road,
Mulgrave Vic 3170
Customer Service: 1800 124 125
(Australia) or 0800 945 995
(New Zealand) or via
Customer Help at kmart.com.au| Target Australia Pty Ltd
C/- Customer Service Centre
2 Kendall Street, Williams Landing,
Vic, 3027
Customer Service: 1300 753 567
or via Customer Help at target.com.au/help/contact- us

WARNING:

• Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
• Replacement of a battery with an incorrect type that can result in an explosion or the leakage
• Please note the product working temperature is : 0-40 ℃. ****

References

• kmart.com.au

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>