DotAIO V2 Lite Dotmod Electronic Cigarette User Manual

User Manual

Know your dotAIO V2 Lite

Front
Back
Tank and components
Know your dotAIO V2 Lite
**Settings mode***
In the settings menu functions such as stealth, brightness, and display color are accessible

Know your dotAIO V2 Lite Tank

nstalling & Replacing coils

| |
---|---|---
1. Place the tank upside down with the airflow control ring facing
up| 2. Remove the airflow control ring from the tank by pulling up| 3. Remove the coil from the tank by pulling up
| |
4. Orient the reservoir above the coil| 5. Insert the coil into the tank| 6. Place the airflow control ring over the coil and push together until it clicks

Filling the tank

| |
---|---|---
1. With the coil assembly module in the tank, hold the tank with the silicone lid facing up, then tilt the tank sideways and open the silicone lid| 2. Proceed to fill the tank with your e – juice using the side hole with the silicone plug. Do not overfill the tank| 3. Place the silicone plug back into the tank.
Push it until it is sealed

Adjustable airflow

| Rotate the airfiow control ring to control and adjust the air intake
---|---

How to install the tank

| |
---|---|---
1. Pick up the device and remove the tank door panel by lifting it with afingernail| 2. With the silicone plug side facing out, place the airflow control base over the connector and press the top part of the tank flrmly until it clicks| 3. Place the tank door panel back onto the dotAIO V2 Lite

How to install your battery

1. Pick up the device and remove the battery door panel by lifting it with a fingernail| 2. Lay the battery ribbon across the battery tray
---|---
|
3. Insert the 18650 battery according to the positive and negative symbols located on the battery tray| 4. Place the battery door back onto the dotAIO V2 Lite ensuring the battery ribbon is covered by the door
|

Amperage rating
We recommend a reputable battery rated above 25A continuous discharge

Power levels (Auto mode)

Power level indicator
This device has four auto power levels. To adjust these cylce the device to auto mode and use the (+) and (-) buttons to cycle through the different power levels.

Auto power setting table

Coil
Power| 0.15Ω
0.08Ω-0.25| 0.40Ω
0.25Ω-0.55| 0.70Ω
0.55-0.85Ω| 0.90Ω
0.85-1.45Ω| 1.60Ω
1.45-2.50Ω| MIN / MAX
<0.08Ω/>2.50
---|---|---|---|---|---|---
Very soft| 45W| 20W| 14W| 10W| 8W| Not in the resistance range
available for this device
Soft| 55W| 25W| 16W| 12W| 10W
Medium| 65W| 30W| 18W| 14W| 12W
Strong| 75W| 35W| 20W| 16W| 14W

Nicotine Safety

WARNING: sale to or use of this product by minors is strictly prohibited.
RECOMMENDED USE
This product is intended for use as a personal vaporizer to receive nicotine or other dosages for your requirements. This product is not intended for use with tobacco products.
STORAGE AND DISPOSAL
Keep the container tightly closed and in an upright position. Store e-liquids in a cool, dark, & dry place. Keep out of the reach and sight of children and animals. Dispose of unused e-liquid according to local regulations.
CONTRAINDICATIONS
If you suffer from any of the following conditions, talk to your doctor or pharmacist before using this product: heart, throat or lung disease; kidney or liver disease; stomach ulcer or inflammation of the stomach or esophagus; an overactive thyroid gland or pheochromocytoma; diabetes.
SPECIFIC RISK GROUPS
This product is not recommended for use by pregnant or lactating women.
POSSIBLE ADVERSE EFFECTS
New users of electronic cigarettes may experience dry throat, dry cough, mild pain or irritation of the mouth or respiratory tract. If the symptoms become severe or last for more than 48 hours, please see a general practitioner and report the incidences by following the information given in “Reporting Adverse Eflects.” Possible nicotine withdrawal adverse eflects, irritability or aggression, feeling low, anxiety, restlessness, poor concentration, increased appetite or weight gain, urges to smoke (craving), night time awakening or sleep disturbance, lowering of heart rate.
ADDICTIVENESS AND TOXICITY
This product may contain Nicotine which is a highly addictive substance and is thus not recommended for use by non-smokers. No other ingredient of this product is known to be addictive. This product contains Nicotine which may produce toxic eflects if consumed orally, especially in infants and children. Please DO NOT drink e-liquid. In case it is consumed, please take your e-liquid bottle with you and see a general practitioner immediately.
In case of contact with skin, rinse immediately with cold running water for at least 15 minutes.

REPORTING ADVERSE EFFECTS
If you experience any side eflects as a result of using this product, please help us by informing us about it so that we can continue to improve the safety of our products. Visit: https://dotmod.com/pag-es/health-safety to fill out our Safety concerns form.
Alternately, you can also report your symptoms directly toMHRA using the Yellow Card Portal available at https://yellowcard.mhra.gov.uk/yellowcards/tobacoreportmediator/ 88 Wood St.
London, EC2V 7RS United Kingdom

Battery Safety

WARNING:
Lithium-ion batteries are volatile and may explode or burn if charged, used, transported, stored,or disposed of improperly.

• Keep battery away from high heat, direct sunlight, cold temperatures, humidity, water, and metal, a purse, or anywhere else where it may be exposed to metals.
• Do not tamper with battery or disassemble the device.
• Inspect battery for wear or damage before each use. Do not use if worn or damaged.
• Charge battery with provided charging cable only. Do not charge in your car.
• Do not overcharge or exceed charging amperage.
• Do not leave this device unattended while charging, do not leave it while charging overnight, or unattended in your vehicle.
• If the charger gets too hot, stop charging the device and allow it to cool down.
• Always use a surge protector when charging battery.
• If you witness the battery starting to balloon, swell, smoke, or become very hot: immediately discontinue use, turn off the device, place it on a non-flammable surface in a well-ventilated area away from people and pets.
• Always have a fire extinguisher handy in the event of a fire.
• Do not throw batteries into a fire. Please recycle or dispose of according to local law.
• Keep batteries away from children and pets. Should a child/pet swallow or chew on a battery, immediately consult a physician and/or call your local poison control center.
• Failure to follow warnings may result in electric shock, fire, burns, property damage, or bodily injury.
• Charging is for indoor use only
• The recommended ambient temperature is -10°C- 40°C
• The temperature of the main body of the machine should be kept within the range of 0°C – 40°C when charging.
• Charge the device by a UL Listed USB wall charger

For additional safety information and warnings, please visit www.dotmod.com
dotmod, Inc. is not responsible for damage or injury resulting from improper use, charging, transport, storage, and/or maintenance of this device

Operation and function

Turn on:
To turn the device on click the power button 5 times in rapid succession. The indicator light will flash a white light for 2 seconds for conflrmation.
Shut down:
Quickly press the power button flve 5 times. The indicator light will flash red three times, for conflrmation
Lock / unlock power output:
To lock or unlock the power output selection click the power button 4 times in rapid succession.
Selecting output mode:
To change between the various modes of operation with your dotAIO V2 Lite (PM, SS, NI, TI, or BP) you will click the power button three times to enter the output selection menu. Navigate to the desired output with the +or- keys and then a short press of the power button will select that mode.
PM – Power mode:
The user can adjust the output wattage (power level) for simple operation.
BP – Bypass mode:
The device will function similar to an unregulated device using available battery voltage. Amperage limitations do apply for safety precautions.
NI / TI / SS – Temperature control mode:
Once selected, temp adjustment is the primary adjustment, with wattage as a secondary adjustment. By using speciflc TCR values the device recognizes changes in resistance due to temperature change and limits output to maintain your temp setting.
Settings:
The settings menu allows the user to adjust; color of the UI/display, brightness of the display, as well as stealth mode to disable the lights/display. While in stealth mode the screen will temporarily light up for power adjustments with the + & – buttons.
Temperature control modes**

1. In temp. control mode, after setting your desired temp. with the + or – keys,
2. hold the flre button & – key to enter wattage setting.
3. After 2 sec, wattage will begin flashing and you can use the + or – buttons to set your desired wattage. (4) Press the flre button again to conflrm settings or it will time out after 3 sec of inactivity.

61%- 100%
(3.85V – 4.20V)| 21% – 60%
(3.55V – 3.85V)| 1% – 20%
(3.30V – 3.55V)

Battery status indicator: When charging, the battery indicator will pulse.
Once the device is fully charged, the battery light will stop pulsing and turn oflafter ten minutes.
Battery input: Once the battery is inserted correctly, the light will flash white three times.
Deep sleep : The dotAlO V2 Lite is equipped with our deep sleep function.
After 10 minutes of inactivity, the device will enter a sleep state to reduce battery power consumption.
Charging: The dotAIO V2 Lite allows you to continue vaping while charging the battery.
Protection status : When there is a danger of short circuit or resistance overload, all four lights will flash quickly flash twice.
Overheating: If the temperature exceeds 75*C, the light willflash flve times quickly, please turn off the machine and let it cool down.
No atomizer/resistance beyond the working range: When the power button is pressed, the light will flash white three times if no atomizer is detected, and white four times if the resistance is out of working range.

Battery Indication lights

Red lights

| Power o­ conrmation
| Low voltage (less than 3.30v before ring or less than 2.95v during ring)
| Overheat
White lights
| Power on conrmation
| Short circuit
| Battery inserted properly
| No atomizer detected
| Resistance out of working range
Green lights

(Pulsing)

| Battery charging
| Dry burn protection on
Cyan lights
| Continuous discharge for more than 10 seconds
Yellow lights
| Dry burn protection o­
Purple lights
| No liquid / Dry burn protection

Prompt Information

displayed to check for a short circuit in the coil.
Chip too hot| The temp. inside the device reaches +75*C, wait for the internal temp. of the device to cool down
Weak battery| Insufficient current of battery. Check connections, replace with new battery, lower power output settings to accommodate battery capacity
Low battery| The battery voltage is below 3.3v. Charge battery
lOs limit| If the continuous output time reaches 10s, release the power button and press again to re-operate
Dry coil no liquid| Check to see if there is any liquid remaining on coil
Check atomizer| The atomizer is not detected. Make sure the atomizer is well connected or whether the coil is disconnected
New +: x.xx a Same : x.xx
– ri| A new resistance is detected, press the + button to select the new resistance, or select the – button to keep the current resistance
Resistance too
high| The resistance detected is higher than 2.5 Ohms. Replace the atomizer or make sure it is making contact.
Shorted| The atomizer is short-circuited or the atomizer resistance is less than 0.08 ohms.
Power output locked| The power output is locked to prevent accidental power adjustments. Press the power button 4 times to unlock
Locked click 5x| In the off state, press the power button once to wake, then press it again 5x to unlock
Puff counter| To reset puff counter press and hold the + button and the power button for 3 seconds, once prompted select yes to clear
Ohm reset| To reset the port counter, press and hold the “+” button and the power button for 3 seconds.
Dry Burn
Protection| In auto mode; press and hold the power button and the (-) button for 3 seconds to turn on or off

Customer Service

Our Customer Service Department is happy to help!
We encourage you to reach out to customerservice@dotmod.com for any questions or concerns regarding your device.
Customer Service
Department hours:
Monday – Friday 9:00 AM PST – 5:00 PM PST
@dotmod
Thank You

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>