MARQUARDT HH5 NFC Door Handle Sensor User Manual
- June 16, 2024
- MARQUARDT
Table of Contents
User Manual
HH5
HH5 NFC Door Handle Sensor
Editor: A. Rebello
Department: RDE1-PU
Tel.: +91 (0) 20 6693 8266
Email: Agnetta.Rebello@marquardt.com
First Version: 18.09.2023
Version: 1.0
Proprietary data, company confidential. All rights reserved
The HH5 is a door handle for a car with capacitive touch sensors and NFC. An
integrated NFC antenna inside into the door handle allows the HH5 to identify
authorized smartphones, wearables and NFC tags; to allow the user access to
the car.
The HH5 is connected to the car using a CAN-FD interface. It acts as
communication channel between CAR Electronics control Unit and NFC Readers.
The car ECU NFC Reader requests to the HH5 which communicates with the NFC
device on the integrated antenna using a magnetic field.
User manual
The user places his authorized NFC device (a smartcard or a mobile phone /
wearable with an integrated secure element ID) onto the door handle. The HH5
authorizes the user to the car automatically as soon as a valid device is
recognized. Then the door is unlocked and the driver can access the car. The
NFC communication is only activated once a NFC device is placed onto the door
handle.
MARQUARDT GmbH SchloRstraRe 16
D 78 604 Rietheim — Weilheim| Initial Version| 18.09.2023| Version| 1.0
---|---|---|---|---
Department| RDE1-PU| File| 2023-09-18_User_Manual_HH5.doc
Editor| Agnetta Rebello| Project No.|
Revision| –| Page|
History
Version | Chapter | Changes | Date | Editor |
---|---|---|---|---|
1.0 | All | Original version | 18.09.2023 | A. Rebello |
11 December 2023
SGS North America Inc.
620 Old Peachtree Road
SUITE 100
Suwanee, Georgia
United States
Compliance Statement in Car Manual / FCC ID: IYZHH5
Dear Sirs,
Our products with the above FCC ID code is an NFC enabled Door Handle Sensor.
The product will be supplied as an original equipment device to the car
manufacturer.
Hereby we assure that the following caution statement as per CFR 47, Part 15,
§ 15.21 will be included in the owner’s manual of the cars:
The title “CAUTION TO USERS” or “FCC Warning:” “NOTE:” or relevant title and
“Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.”
In addition our client also assures that the following statement will be
included in the manual as per CFR 47, Part 15, § 15.19 (a) (3).
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
11 December 2023
SGS North America Inc.
620 Old Peachtree Road
SUITE 100
Suwanee, Georgia
United States
Compliance Statement in Car Manual / IC: 2701A-HH5
Dear Sirs,
Our products with the above IC ID Number is an NFC enabled Automotive Door
Handle Sensor.
The product will be supplied as an original equipment device to the car
manufacturer and mounted in their factory
Hereby we assure that the following caution statement as requested per RSS
Regulation will be included in the owner’s manual of the cars:
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Marquardt GmbH, Schioss-Strafe 16, 78604 Rietheim-Weilheim, Germany,
telephone: + 49 7424990, www.marquardt.com
Management: Dr. Harald Marquardt (Chairman), Dr. Kristjan Ambroz, Jochen
Becker
Chairman of the Supervisory Board: Rainer Hundsdérfer, Stuttgart District
Court HRB 450295
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>