KODAK VERITE 50 ECO Photo Printer User Guide

KODAK VERITE 50 ECO Photo Printer

Product Information

Specifications

• Model: JF330UC
• Color: Black
• USB cable: Not included
• USB cable requirement: USB 2.0 (type A – B)

Product Usage Instructions

Unpacking and Setup

1. Remove any tape from the printer.
2. Remove any paper from the printer.
3. Connect the printer to a power source and turn it on.

Installing Ink Cartridges

1. Make sure the Cartridge tab is locked in place.
2. Install the black ink cartridge.
3. Install the color ink cartridge.

Loading Paper

1. Open the paper exit tray with the exit tray extender.
2. Load a minimum of 10 sheets of paper (20 lb. or 75 g/m2).
3. Place the loaded paper in the printer and open the paper exit tray.

Downloading PC Drivers and Software
For PC Users:

• Ensure your anti-virus software is up-to-date.
• Download the PC driver from the following URL: www.kodakverite.com/support
• Open the downloaded PC driver and follow the on-screen instructions to install and set up your printer via USB or Wi-Fi.

Smartphone or Tablet App Download
For Smartphone or Tablet Users:

• Search for “kodak verite” in the AppStore or Google Play.
• Install the “KODAK VERITE Print&Scan” app.
• Open the app and follow the on-screen instructions to set up your printer.

Frequently Asked Questions (FAQ)

• Q: Is a USB cable included with the product?
  A: No, a USB cable is not included. You will need to prepare a USB 2.0 cable (type A – B).

• Q: How many sheets of paper can the printer hold?
  A: The printer can hold a minimum of 10 sheets and up to 60 sheets of paper (20 lb. or 75 g/m2).

• Q: Where can I find the SSID and security code for Wi-Fi setup?
  A: The SSID and security code may be found on the bottom or rear of your router.

• Q: Where can I find more information on ink cartridge calibration?
  A: For more information on ink cartridge calibration, please visit www.kodakverite.com/support.

• Q: What are the system requirements for Mac users?
  A: The product requires Mac OS X v10.9 or later.

Quick Start Guide
VERITÉ 50 Eco

What’s in the Box

CAUTION
USB cable not included. Prepare a USB 2.0 cable (type A – B).

Available for Online/Internet downloading, Extended User Guide, PC Drivers and Printer Software (firmware.) www.kodakverite.com/support

Unpack and Plug in

1. Remove tape
2. Load a minimum of 10 sheets of paper in the printer and open the paper exit tray.
3. Refer to Chapter “How to – Load paper” on the page to the right.
4. Remove paper
5. Power on
6. After AC plug is plugged into AC outlet, Power LED (yellow) will be blinking.

Download PC Drivers and Software

Note: Requires Internet connection.

CAUTION Is your anti-virus software up-to-date

Where are the SSID and the Security Key?

• The SSID and the security code may be found on the bottom or rear of the router.
• Please install for each PC, Laptop, Smartphone or Tablet PC the Kodak Verité drivers or app. See below for how to details.

PC / Laptop driver download

1. Download a PC driver using the following URL.
2. Requires Mac OS X v10.9 or later
3. Open the downloaded PC driver
4. Install the PC driver and set up your printer via USB or Wi-Fi by following the on-screen instructions.
5. For more information on ink cartridge calibration, go to www.kodakverite.com/support
6. If the following screen appears, the installation and setup are complete.
7. For the best results update your printer
   software (firmware) to the latest version
   through the Kodak Verité PC drivers or
   mobile app.

Smartphone or Tablet app download

1. Search “kodak verite” at AppStore or Google Play.
2. Install “KODAK VERITE Print&Scan”.
3. Open “KODAK VERITE Print&Scan”.
4. Set up the printer by following the on-screen instructions.
5. For more information on ink cartridge calibration, go to www.kodakverite.com/support
6. If the following screen appears, the installation and setup are complete.
7. For the best results update your printer software (firmware) to the latest version through the Kodak Verité PC drivers or mobile app.

How to

Install Ink Cartridges

Load Paper

Copy and Scan in application

Connect another PC, Laptop, Smartphone or Tablet
For installation of a second device to the Kodak Verité printer, please install the Kodak Verité PC driver or app (see Chapter 3) on your second device. Each device needs its own PC drivers or app to connect to the Kodak Verité printer.

Wi-Fi Performance

• When performing network connections, make sure the device is not placed too far away from the
• Access Point/Router and the Access Point/Router is powered on and its settings are correct. If you need additional help on network problems, visit our website at www.kodakverite.com/support .
• If the signal range of your router or gateway doesn’t seem adequate for your needs, you may be able to improve the range by changing the location of the router.

Learn more: additional help and information www.kodakverite.com/support

Product Registration

• Registering your product will help provide you with quicker and more efficient service and support. Registering will also allow us to communicate with you about new
  products and services and to provide you personalized promotional offers to improve your printing experience. www.kodakverite.com/support

• The Kodak trademark, logo and trade dress are used under license from Kodak

Safety Sheet

Notice and safety

• Please read the following instructions carefully before operating the device and refer to them as needed to ensure the continued safe operation of your device.
• Your KODAK product and supplies have been designed and tested to meet strict safety requirements, including safety agency evaluation and certification, and compliance with electromagnetic regulations and established environmental standards. The safety and environment testing, and performance of this device have been verified using approved materials only.
• WARNING: Unauthorized alterations, which may include the addition of new functions or connection of external devices, may impact the product certification. Please contact your Customer Support representative for more information at www.kodakverite.com/support

Dear customer
You must remove the packaging used for transportation before you use the device. You can find the most up-to-date driver and manuals on the website: www.kodakverite.com/support

About this Safety sheet
Read the entire Safety sheet carefully. Follow all safety instructions in order to ensure proper operation of your device. The manufacturer accepts no liability if these instructions are not followed.

CAUTION
Damage to the Device or Loss of Data!
Turn the device Off using (Power/Standby) button located on the control panel of the device before you unplug the AC plug from the AC outlet.

General safety information

• Funai reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.
• The material in this Safety sheet is believed adequate for the intended use of the system.
• If the product or its individual modules or procedures are used for purposes other than those specified herein, confirmation of their validity and suitability must be obtained.
• Funai warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied.
• Funai cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document. Errors reported to Funai will be adapted and published on the Funai support website as soon as possible.

Warranty

• Do not attempt to take the device apart. There is danger of an electrical shock. No components are user serviceable. Opening the device voids the warranty. Do not disassemble or remove covers to gain access to the inside of the device. Repairs may only be done by an authorized service center. Failure to do so shall void any warranty, stated or implied.
• Any operation expressly prohibited in this Safety sheet, any adjustments or assembly procedures not recommended or authorized in this Safety sheet shall void the warranty.
• Do not make any changes or settings that are not described in this Safety sheet. Physical injury or damage to the device or loss of data can result from improper handling. Take note of all warning and safety notes indicated.
• Do not remove the product label located on the bottom side of your device; this would void the warranty.

Setting up the device

• Please read the following instructions when you set up the device.
• Select a stable location. Select a level, stable place with adequate space for air circulation. Make sure to allow extra space to open covers and trays. The setup area should be well-ventilated and away from direct sunlight or sources of heat, cold, and humidity. Do not set the device near the edge of your desk or table.
• Place the device on a flat and stable surface.
• The device should be placed securely. If the device should fall, it can be damaged or can cause injury to people, especially small children. If the device is dropped it should be inspected by an authorized service center.
• Position all cables in such a way that no one will stumble on them, thus avoiding possible injuries to persons or damage to the device itself.
• Protect the device against direct sunlight, heat, large temperature fluctuations and moisture. Do not place the device in the vicinity of heaters or air conditioners. Observe the information on temperature and humidity in the technical data.
• The device must have sufficient ventilation and may not be covered. Do not put your device in closed cabinets or boxes. Do not place the device on soft surfaces such as tablecloths or carpets and do not cover the ventilation slits. Otherwise the device could overheat or catch fire.
• The area in which you operate the device must be adequately ventilated, especially if the device is used frequently. Set up your device in such a way that the flow of the exhaust air stream points away from the work station.
• Never use a gas duster on this device. This gas trapped inside of this device may cause ignition and explosion.
• In the event that the device becomes too hot, or if you see smoke coming from the device, you must immediately disconnect the AC plug from the AC outlet. Have your device examined by trained professionals at an authorized service center. To prevent the spread of fire, open flames should be kept away from the device.
• Do not allow liquids to enter into the device. Disconnect the device’s AC plug from the AC outlet if liquids or foreign objects have entered the device and have your device examined by trained professionals at an authorized service center.
• Do not allow children to handle the device without supervision. The packing materials should be kept out of the hands of children.
• Do not press forcefully on the scanner lid when you scan thicker documents or three dimensional items, this could damage the scanner lid and/or the scanner glass.
• Make sure to place the device on a desk or table with adequate strength.
• Do not shake the device as this may cause printing failure or trouble. Do not place the device in a location or environment of high temperature or high humidity.

Power supply

• Check whether the voltage rating of your device (indicated on the product label located on the bottom side) is adequate for the power source available at the setup location.
• Do not plug in the device in moist rooms. Never touch the AC power cord or the AC plug connection with wet hands.
• Set up your device so that the AC plug is easily accessible. In an emergency, disconnect your device from the power supply by unplugging the AC plug.
• Never touch the AC power cord if the insulation is damaged.
• Damaged wire could cause fire or electrical shock. Keep the AC power cord straight and without being twisted, bent or scraped. Please contact an authorized service center.
• Before cleaning the surface of your device, disconnect it from the power supply by unplugging the AC plug. Use a soft, lint-free cloth.
• Never use liquid, gaseous or easily flammable cleansers (sprays, abrasives, polishes, or alcohol). Do not allow any moisture to reach the interior of the device.
• In rare cases, the saved settings can be partly or completely reset to factory defaults when the AC plug is disconnected or in the event of a power outage.
• Do not unplug the AC plug directly after a print job or after entering settings.
• Press (Power/Standby) to turn the device On or Off .
• To completely turn Off the device, you must unplug the AC plug.
• Unplug the AC plug to shut the device Off when trouble is found or not in use.
• The AC plug shall remain readily available.

Caution when handling ink cartridges
Never open an ink cartridge. Store both new and used cartridges in a place where they will not come into the hands of children.

Ink cartridge safety

If ink gets on your skin, wash with soap and water. If ink gets into your eyes, flush immediately with water. If any discomfort or change in vision persists after washing eye(s), seek medical attention immediately.
For Safety Data Sheets (SDS) on inks, go to www.kodakverite.com/support.

Caution while the device is printing

• Do not put your hand or other things in the paper exit tray or the paper support.
• Never touch the inside of the device or ink cartridges.

Federal communications commission notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment may generate or use radio frequency energy. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

Note:

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an AC outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Declaration of conformity

• Trade Name: KODAK
• Responsible party: FUNAI CORPORATION, Inc.
• Product Name: VERITE 50/37 (US / Canada)
• Regulatory Model : JM502-40UC (VERITE 50/37)
• Address: 19900 Van Ness Avenue, Torrance, CA 90501 U.S.A.
• Telephone Number: 1-844-995-6325 (1-844-99KODAK)

For regulatory purpose, this product is assigned a regulatory model name. The Regulatory model name should not be confused with the product name or product model.

Canadian notice
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference; and
2.  This device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B)

Wireless network

• The functioning of security systems, medical equipment or sensitive devices can be disrupted by the transmission power of the device.
• Observe any usage regulations (or restrictions) in the vicinity of such equipment.
• The use of this device can affect the operation of insufficiently shielded medical devices and hearing aids and pacemakers through the release of high frequency radiation. Also consult a doctor or the manufacturer of the medical device to establish whether these are sufficiently shielded from external high frequency radiation.

Trademark information

• Windows and the Windows logo are trademarks of the Microsoft group of companies in the United States and/or other countries.
• Mac, Mac logo, OS X and macOS are trademarks of Apple Inc., registered in the U.S. and other countries.
• Google Play and the Google Play logo are trademarks of Google Inc.
• Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries.

Limited Warranty

FUNAI warrants this Product to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase unless the product is sold as refurbished in which case it then comes with a (90) day Limited Warranty.

LIMITS AND EXCLUSIONS:

• Warranty service is only available from within the country where the Product was originally purchased. You may be required to ship Product, at your expense, to the authorized service facility for the country where the Product was purchased.
• Funai will repair or replace this Product if it fails to function properly during the warranty period, subject to any conditions and/or limitations stated herein. Warranty service will include all labor as well as any necessary adjustments and/or replacement parts. If Funai is unable to repair or replace a Product, Funai will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Funai along with proof of the purchase price paid. Repair, replacement, or refund of the purchase price are the sole remedies under this warranty.
• If replacement parts are used in making repairs, those parts may be remanufactured or may contain remanufactured materials. If it is necessary to replace the entire Product, it may be replaced with a remanufactured Product. Remanufactured Products, parts and materials are warranted for the remaining warranty term of the original Product, or 90 days after the date of the repair or replacement, whichever is longer.
• THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.
• This warranty shall not be extended to any other person or transferee.
• This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center.
• This warranty only covers failures due to defects in material or workmanship which occur during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products not supplied by FUNAI, or damage, which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or off ice use of this product, or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES, ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS. FUNAI AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.

IMPORTANT: Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific rights, and you may have other rights which vary from state to state or by jurisdiction.

Outside the United States and Canada

• In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a specific Funai warranty is communicated to the purchaser in writing by a Funai company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.
• ATTENTION: FUNAI RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.

WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:

• To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI will not reimburse you for any service done by unauthorized service providers without prior written approval.
• To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries,
• please contact us at:
  • FUNAI SERVICE CORPORATION
  • www.kodakverite.com/support
  • 2425 Spiegel Drive, Groveport, OH 43125
  • Printed in Philippines

References

• Kodak Verite Printer Software and Driver Downloads – Kodak Support
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>