Nilight ZH303 2PCS 6.5 Inch 120W Spot and Flood Combo Driving User Manual
- June 15, 2024
- Nilight
Table of Contents
Nilight ZH303 2PCS 6.5 Inch 120W Spot and Flood Combo Driving User Manual
Installation: **
**
- Testing the light bar to the power (12V DC) directly, Red line contact to positive of power, black line contact to power negative.
- Splice light bar wires to the blue male terminals, and then connect to the wiring harness female terminals (black to black, red to red).
- Connect the red wire (with fuse) to battery positive terminal, while the black wire from relay to battery negative terminal.
- Flip the switch On/Off to test the LED light bar.
FAQ
DOES IT FIT MY VEHICLE?
Our led light bars fit most vehicles (Off-road vehicle, Special vehicle, Engineering vehicles). But you need to measure the place where you want to install the light bar so that you can choose the correct size.
I FOUND CONDENSATION INSIDE THE LIGHT BAR. WHAT SHOULD I DO?
Firstly, remove the breather or 2 side lids Secondly, turn on the light bar Thirdly, after 1-2 hours lighting, the vapour will be out.
HOW TO CLAIM THE WARRANTY?
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>