SATECHI M1 Wireless Mouse User Manual
- June 5, 2024
- SATECHI
Table of Contents
M1 WIRELESS MOUSE
USER MANUAL
THANK YOU FOR CHOOSING
COMPLETE YOUR DESKTOP
Featuring Bluetooth 4.2 connection, a rechargeable Type-C- port, and a modern,
ergonomic design ideal for both left and right-hand users. Seamlessly connect
to your favorite Bluetooth-enabled device for wireless control, with a range
of up to 32 ft. It’s fast, yet precise tracking makes browsing the web a
breeze.
SPECIFICATIONS
| MODEL | ST-A BIC M M |
|---|---|
| DIMENSIONS | 4.41″ x 2.32″ x 1.18″ |
| WEIGHT | 86.5g |
| WIRELESS CONNECTIVITY | Bluetooth |
| SENSOR TYPE | Optical |
| RESOLUTION | 1200 |
| DPI BATTERY CAPACITY | 500mAh |
SYSTEM REQUIREMENTS
| BLUETOOTH VERSION | 4.2 |
|---|---|
| WINDOWS | 8 / 8.1 / 10 |
| MACOSX | v10.4 or later |
CONTENTS
PAIRING MODE
To put the M1 Mouse in Pairing Mode, press and hold the “connect” button on the back of the M1 Mouse for~3 seconds, then release. The indicator will blink blue.
FUNCTIONS
PAIRING: MAC
- Turn on the Bluetooth connection on the device.
- Press and hold the “connect” button for about 3 seconds. (Please make sure the blue LED is flashing)
- The device will search automatically. When “Satechi M1 Mouse shows, choose “Pair”.
PAIRING: WINDOWS
- Turn on the Bluetooth connection on the device.
- Press and hold the “connect” button for about 3 seconds. (Please make sure the blue LED is flashing)
- The device will search automatically. When “Satechi M1 Mouse” shows, choose “Pair”.
ON / OFF & RECHARGEABLE BATTERY
To turn the Satechi M1 Mouse on or off, move the switch on the back of the device to the “on” position. The M1 Mouse is equipped with a rechargeable battery. When the mouse is on low power, the indicator will flash red. To charge, plug the included charging cable into the Mouse’s USB-C port. Then plug the other end of the cable into a computer or USB wall adapter to charge. The indicator light will turn blue during charging status. When full, the LED will turn off.
FCC
This device complies with part 15 of the FCC results. Operation is subject
to the following two conditions:
- This device may not cause harmful interference and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This Equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to Part 15 of the Federal
Communications Commission (FCC) rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to t, to correct the interference by one or more of the
following measures:
1.1. Reorient or relocate the receiving antenna
1.2. Increase the separation between the equipment and receiver
1.3. Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected
1.4. Consult the dealer or an experienced radio/TV technician for help Changes
or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
CE DECLARATION OF CONFORMITY
Satechi declares that this product is in compliance with the essential
requirements and other relevant provisions of applicable EC directives. For
Europe, a copy of the Declaration of Conformity for this product may be
obtained by visiting www.satechi.net/doc
QUESTIONS?
+1 858 268 1800
www.satechi.com
****support@satechi.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>