LEDJ Q Series Exterior Fixtures Light User Manual

LEDJ Q Series Exterior Fixtures Light

Product Information

Product Overview

The Spectra Q Series is a range of exterior fixtures designed for various lighting applications. The series includes the Spectra Flood Q6, Spectra Flood Q15, and Spectra Batten Q16.

Technical Specifications

Product Usage Instructions

Safety Advice

WARNING: For your own safety, please read this user manual carefully before your initial start-up!

CAUTION: Take care when using this equipment! High voltage can pose a risk of electric shock. It is important to follow the instructions in this manual and avoid any unauthorized modifications to the equipment. The manufacturer will not accept liability for any damages caused by non- observance of this manual or unauthorized modifications. Operating the equipment in a way that is not described in this manual may result in damage to the product and void the warranty. Incorrect operation can also lead to dangers such as short-circuits, burns, and electric shocks. Ensure your own safety and the safety of others by following proper installation and use guidelines.

Main Menu

The Spectra Q Series fixtures come with an OLED display and function buttons for easy menu navigation. The main menu options include:

1. DMX
2. Slave
3. Auto
4. Program
5. Dimmer
6. Settings
7. Information

Sub Menu

The sub-menu options depend on the selected main menu option. Here are some examples:

Main Menu: DMX

• Address: Options/Values – 001-512
• Channels: Options/Values – 04 (4 channel mode), 06 (6 channel mode), 09 (9 channel mode)

Main Menu: Settings

• Mode: Options/Values – Mode 1, Mode 2-14
• Colour: Options/Values – Red, Green, Blue, White
• Speed: Options/Values – Speed settings for Mode 2-14
• Strobe: Options/Values – Strobe settings

FAQ (Frequently Asked Questions)

• How do I unlock the menu on the OLED display?
• To unlock the menu, hold the MODE and SET buttons for 3 seconds.
• What is the power supply range for the Spectra Q Series fixtures?
• The power supply range is 100~240V, 50/60Hz.
• What is the IP rating of the Spectra Q Series fixtures?
• The Spectra Q Series fixtures have an IP65 rating, making them suitable for outdoor use.
• What is included in the box?
• The box includes 1 x fixture, 1 x power cable, and 1 x user manual.

Safety advice

WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP!

• Before your initial start-up, please make sure that there is no damage caused during transportation.
• Should there be any damage, consult your dealer and do not use the equipment.
• To maintain the equipment in good working condition and to ensure safe operation, it is necessary for the user to follow the safety instructions and warning notes written in this manual.
• Please note that damages caused by user modifications to this equipment are not subject to warranty.

CAUTION!
TAKE CARE USING THIS EQUIPMENT! HIGH VOLTAGE RISK OF ELECTRIC SHOCK!!

IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment.

• Never let the power cable come into contact with other cables. Handle the power cable and all mains voltage connections with particular caution!
• Never remove warning or informative labels from the unit.
• Do not open the equipment and do not modify the unit.
• Do not connect this equipment to a dimmer pack.
• Do not switch the equipment on and off in short intervals, as this will reduce the system’s life.
• Do not expose to flammable sources including liquids or gases.
• Always disconnect the power from the mains when equipment is not in use or before cleaning! Only handle the power cable by the plug. Never pull out the plug by pulling the power cable.
• Make sure that the available mains supply voltage is between 100~240V AC and 50/60Hz.
• Make sure that the power cable is never crimped or damaged. Check the equipment and the power cable periodically.
• If the equipment is dropped or damaged, disconnect the mains power supply immediately and have a qualified engineer inspect the equipment before operating again.
• If your product fails to function correctly, stop use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Pro Light dealer for service.
• Only use fuses of the same type and rating.
• Repairs, servicing and power connections must only be carried out by a qualified technician. THIS UNIT CONTAINS NO USER-SERVICEABLE PARTS.
• This lighting fixture is for professional use only – it is not designed for or suitable for household use. The product must be installed by a qualified technician following local territory regulations. The safety of the installation is the responsibility of the installer. The fixture presents risks of severe injury or death due to fire hazards, electric shock and falls.
• Warning! Risk Group 2 LED product according to EN 62471. Do not view the light output with optical instruments or any device that may concentrate the beam.
• WARRANTY: One year from the date of purchase.

OPERATING DETERMINATIONS

If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns electric shocks etc. Do not endanger your own safety and the safety of others  Incorrect installation or use can cause serious damage to people and/or property.

Product overview & technical specifications

Spectra Q Series

The LEDJ IP65-rated Spectra Q series bathes architectural details in constantly changing colours from its high-output LEDs. The 45° beam angle smoothly washes facades and features in deep rich colours or warm pastel tones. The rugged aluminium exterior ensures years of use in all weather conditions while the integral mounting brackets complete the fixtures’ sleek, modern appearance. The LED menu display with 4 touch button control panel and OLED display facilitates control over colour mixing, colour fades, chases and DMX.

• 6 x 5W quad-colour LEDs (RGBW) – LEDJ286
  • 15 x 5W quad-colour LEDs (RGBW) – LEDJ287
  • 16 x 5W quad-colour LEDs (RGBW) – LEDJ288
• Beam angle: 45°
• 675 Lux @ 2m (full on) – LEDJ286
  • 1,746 Lux @ 2m (full on) – LEDJ287
  • 2,429 Lux @ 2m (full on) – LEDJ288
• 12kHz refresh rate – LEDJ286 & LEDJ288
  • 4kHz refresh rate – LEDJ287
• DMX channels: 4, 6 or 9 selectable
• Static colour, colour change, colour fade, auto and master/slave modes
• 0 – 100% dimming and variable strobe
• 4 push button menu with OLED display
•  IP-rated power input/output
• IP-rated 3-Pin DMX input/output

Specifications| Spectra Flood Q6| Spectra Flood Q15| Spectra Batten Q16
---|---|---|---
Power consumption| 35W| 80W| 85W
Power supply| 100~240V, 50/60Hz| 100~240V, 50/60Hz| 100~240V, 50/60Hz
Dimensions| 152 x 220 x 88mm| 207 x 330 x 110mm| 140 x 1010 x 145mm
Weight| 2.5kg| 5.2kg| 6.1kg
Order codes| LEDJ286| LEDJ287| LEDJ288

Technical specifications

1. – Bracket
2. – OLED display
3. – Function buttons
4. – IP-rated power trailing input
5. – IP-rated power trailing output
6. – IP-rated 3-Pin DMX trailing input
7. – IP-rated 3-Pin DMX trailing output

Operating instructions

IMPORTANT! PLEASE NOTE: The OLED display for this fixture has a menu- locking function where after 20 seconds of inactivity it will lock. To unlock the menu hold the “MODE” and “SET” buttons for 3 seconds.

1:DMX

| 1) Address:| 001-512| DMX Address Setting

2. Channels:

| 04 (4 channel mode)|

DMX Channel Setting

06 (6 channel mode)
09 (9 channel mode)
2:Slave| Slave Mode Setting
3:Auto| Auto Mode

4:Program

| 1) Mode:| 01-14|

Built-in Programs

2. Color: (mode 1)| 00-15
3. Speed: (mode 2-14)| 001-100
4. Strobe| 00-99

5:Dimmer

| 1) Red| 000-255|

Manual Dimming Mode

2. Green| 000-255
3. Blue| 000-255
4. White| 000-255

6:Settings

|

1. Curves Select

| 1) Linear|

Dimming Curves Setting

2. Square Law

3. Inv Square Law

4. S-Type

5. Dimmer Speed

| Fast|

Dimming Curves Speed Setting

Smooth

3. Dmx Fail

| Off|

DMX Signal Failure Setting

Hold

4. Dmx Sync

| On|

DMX Synchronisation Setting

Off

5. Lock

| Yes|

Display Lock Setting

No

6. Factory

| Yes|

Factory Reset

No

7:Information

| Versions:| Software Version
Temperature:| Fixture Temperature
UID:| Fixtures UID

Colour macros:

DMX channel modes:

Channel|

Value

|

Function

---|---|---
04| 06| 09
 | 1| 1| 000-255| Master dimmer (0-100%)
1| 2| 2| 000-255| Red (0-100%)
2| 3| 3| 000-255| Green (0-100%)
3| 4| 4| 000-255| Blue (0-100%)
4| 5| 5| 000-255| White (0-100%)
 |  |

6

| 000-015| No function|

Colour Presets

016-031| Red
032-047| Green
048-063| Blue
064-079| White
080-095| Amber
096-111| Orange
112-127| Yellow
128-143| Purple
144-159| Pink
160-175| Cyan
176-191| Pastel Red
192-207| Pastel Green
208-223| Pastel Blue
224-239| Warm White
240-255| Cool White
 |  |

7

| 000| No function|

Built-in programs

001-019| Program 02
020-039| Program 03
040-059| Program 04
060-079| Program 05
080-099| Program 06
100-119| Program 07
120-139| Program 08
140-159| Program 09
160-179| Program 10
180-199| Program 11
200-219| Program 12
220-239| Program 13
240-255| Program 14
000-255| Program 15
 |  | 8| 000-255| Speed (slow-fast)
 |

6

|

9

| 000-010| No function
011-255| Strobe (slow-fast)

RDM (Remote Device Management):
The LEDJ Spectra Q Series supports RDM communication protocol. RDM supports 2-way traffic in the standard DMX-512 protocol. RDM can control devices, and configurations, detect fixtures and allows the changing of DMX address, DMX mode etc. Each RDM-compatible fixture can be identified by the built-in unique UID code. To display the UID go to 7:Information in the menu and the UID will be displayed.

DMX setup

Setting the DMX address:

The DMX mode enables the use of a universal DMX controller. Each fixture requires a “start address” from 1- 512. A fixture requiring one or more channels for control begins to read the data on the channel indicated by the start address. For example, a fixture that occupies or uses 7 channels of DMX and was addressed to start on DMX channel 100, would read data from channels: 100,101,102,103,104,105 and 106. Choose a start address so that the channels used do not overlap. E.g. the next unit in the chain starts at 107.

DMX 512:

DMX (Digital Multiplex) is a universal protocol used as a form of communication between intelligent fixtures and controllers. A DMX controller sends DMX data instructions form the controller to the fixture. DMX data is sent as serial data that travels from fixture to fixture via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX fixtures (most controllers only have a data “out” terminal).

DMX linking:

DMX is a language allowing all makes and models of different manufacturers to be linked together and operate from a single controller, as long as all fixtures and the controller are DMX compliant. To ensure proper DMX data transmission, when using several DMX fixtures try to use the shortest cable path possible. The order in which fixtures are connected in a DMX line does not influence the DMX addressing. For example; a fixture assigned to a DMX address of 1 may be placed anywhere in a DMX line, at the beginning, at the end, or anywhere in the middle. When a fixture is assigned a DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that unit, no matter where it is located in the DMX chain.

DATA cable (DMX cable) requirements (for DMX operation):

This fixture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit. Your unit and your DMX controller require a standard 3-pin XLR connector for data input/output, see image below.

Further DMX cables can be purchased from all good sound and lighting suppliers or Pro Light Concepts dealers. Please quote:

• CABL10 – 2m
• CABL11 – 5m
• CABL12 – 10m

Also, remember that DMX cable must be daisy-chained and cannot be split.

Notice:
Be sure to follow the diagrams below when making your own cables. Do not connect the cable shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR’s outer casing. Grounding the shield could cause a short circuit and erratic behaviour.

Special note:
Line termination:

When longer runs of cable are used, you may need to use a terminator on the last unit to avoid erratic behaviour. Using a cable terminator will decrease the possibility of erratic behaviour. (3-pin – Order ref: CABL9O, 5-pin – Order ref: CABL89)

5-pin XLR DMX connectors:

Some manufacturers use 5-pin XLR connectors for data transmission in place of 3-pin. 5-pin XLR fixtures may be implemented in a 3-pin XLR DMX line. When inserting standard 5-pin XLR connectors in to a 3-pin line a cable adaptor must be used. The diagram below details the correct cable conversion.

WEEE notice

Correct Disposal of this Product (Waste Electrical & Electronic Equipment)

This marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.(Applicable in the European Union and other European countries with separate collection systems)

www.prolight.co.uk

References

• Manual-Hub.com - Free PDF manuals!
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>