LEDJ601 Libretto Mini Bi-CCT Profile User Manual

LEDJ601 Libretto Mini Bi-CCT Profile

Specifications:

• Power consumption: 57W
• Power supply: 100-240V, 50/60Hz
• Fuse: T1A 250V
• Dimensions: 260 x 171 x 405mm
• Weight: 2.6kg
• Order code: LEDJ601

Product Overview:
The Libretto Mini Bi-CCT Profile is a 50W COB LED Profile that combines warm white and cool white within the same LED chip. It is designed for use in gallery, museum, and theatre applications. The fixture features a manually adjustable zoom range of 14-31 degrees and projects a precise, focused hard- edge beam. Control can be done via DMX or the on-board menu. The fixture also includes a four-blade shutter system for beam shaping and can accommodate both metal and glass gobos. Five metal gobos are included with the fixture.

Installation:
Before installing the fixture, ensure that the supporting structure (e.g., truss) is capable of holding at least 10 times the weight of the fixture without any deformation. For example, if the fixture weighs 15kg, the supporting structure should be able to hold a minimum of 150kg as a point load. The fixture must be securely attached with a secondary safety attachment, such as a safety cable, during installation. When mounting, removing, or servicing the fixture, never stand directly below it.

Overhead installation requires experience and qualifications to calculate working load limits and assess the suitability of the installation area and materials used. It is recommended to have a qualified person perform periodic safety inspections of the fixture and installation material. If you do not have the relevant experience and/or qualifications, it is advised not to attempt the installation yourself. The installation should be checked annually by a qualified person.

FAQ :

• Q: What is the power consumption of the Libretto Mini Bi-CCT Profile?
• A: The power consumption of the fixture is 57W.
• Q: What are the included gobos with the fixture?
• A: The fixture includes five metal gobos.
• Q: How is the fixture controlled?
• A: The fixture can be controlled via DMX or the on-board menu
• Q: What is the zoom range of the fixture?
• A: The fixture has a manually adjustable zoom range of 14-31 degrees.

WARNING
FOR YOUR SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP!

• Before your initial start-up, please make sure that there is no damage caused during transportation.
• Should there be any damage, consult your dealer and do not use the equipment.
• To maintain the equipment in good working condition and to ensure safe operation, the user must follow the safety instructions and warning notes written in this manual.
• Please note that damages caused by user modifications to this equipment are not subject to warranty.

CAUTION!
KEEP THIS EQUIPMENT AWAY FROM RAIN, MOISTURE AND LIQUIDS

CAUTION!
TAKE CARE USING THIS EQUIPMENT!
HIGH VOLTAGE RISK OF ELECTRIC SHOCK!!

IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment.

• Never let the power cable come into contact with other cables. Handle the power cable and all mains voltage connections with particular caution!
• Never remove warning or informative labels from the unit.
• Do not open the equipment and do not modify the unit.
• Do not connect this equipment to a dimmer pack.
• Do not switch the equipment on and off in short intervals, as this will reduce the system’s life.
• Only use the equipment indoors.
• Do not be exposed to flammable sources, liquids, or gases.
• Always disconnect the power from the mains when equipment is not in use or before cleaning! Only handle the power cable by the plug. Never pull out the plug by pulling the power cable.
• Make sure that the available mains supply voltage is between 100~240V AC and 50/60Hz.
• Make sure that the power cable is never crimped or damaged. Check the equipment and the power cable periodically.
• If the equipment has been exposed to drastic temperature fluctuation (e.g. after transportation), do not connect power or switch it on immediately. The arising condensation might damage the equipment. Leave the equipment switched off until it has reached room temperature.
• Never touch the fixture during operation as it may be hot.
• If the equipment is dropped or damaged, disconnect the mains power supply immediately and have a qualified engineer inspect the equipment before operating again.
• If your product fails to function correctly, stop use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Pro Light dealer for service.
• Only use fuses of the same type and rating.
• Repairs, servicing, and power connections must only be carried out by a qualified technician. THIS UNIT CONTAINS NO USER-SERVICEABLE PARTS.
• This lighting fixture is for professional use only – it is not designed for or suitable for household use. The product must be installed by a qualified technician in accordance with local territory regulations. The safety of the installation is the responsibility of the installer. The fixture presents risks of severe injury or death due to fire hazards, electric shock, and falls.
• Warning! Risk Group 2 LED product according to EN 62471. Do not view the light output with optical instruments or any device that may concentrate the beam.
• WARRANTY : Two years from the date of purchase.

OPERATING DETERMINATIONS
If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and the warranty becomes void. Incorrect operation may lead to danger e.g.: short-circuit, burns and electric shocks, etc.

Do not endanger your safety and the safety of others! Incorrect installation or use can cause serious damage to people and/or property.

Product overview & technical specifications

Libretto Mini Bi-CCT Profile
The Libretto Bi-CCT is a 50W COB LED Profile that combines both warm-white and cool-white within the same LED chip. Ideally suited to gallery, museum, and theatre applications it operates with a manually adjustable zoom range of 14-31 degrees and projects a precise, focused hard-edge beam. Control is via both DMX and the on-board menu. Beam shaping is possible with the four-blade shutter system and both metal and glass gobos can be installed. Five metal gobos are included with the fixture.

• 1 x 50W cool white (5800K) and warm white (2800K) COB LED (CW/WW)
• Manually adjustable beam angle: 14° – 31°
• 14° – 1,786 Lux @ 2m, 31° – 1,625 Lux @ 2m
• 2kHz refresh rate
• CRI: CW – 95, WW – 96
• Beam framing shutters
• Zoom and focus adjustment
• Gobo slot
• DMX channels: 2/3 or 3 selectable
• Manual dimming mode via the menu
• 0-100% dimming and variable strobe
• 4 dimming curves: Linear, square law, inverse square law, and S-curve
• 4 push button menu with OLED display
• PowerCON input/output
• 5-Pin XLR input/output
• Fan cooled
• Rear positioning handle
• Includes 5 metal gobos
• Filter frame included

14° – Lux

FULL ON

|

7144

|

1786

|

794

|

447

|

286

---|---|---|---|---|---
CW| 8728| 2182| 970| 546| 349
WW| 5624| 1406| 625| 352| 225
31° – Lux FULL ON|

6500

|

1625

|

722

|

406

|

260

CW| 7868| 1967| 874| 492| 315
WW| 4964| 1241| 552| 310| 199

Included gobos:

Technical specifications

1. OLED display
2. Function buttons
3. 5-Pin DMX input
4. 5-Pin DMX output
5. PowerCON input
6. PowerCON output
7. Fuse T1A 250V
8. Safety eye
9. Hanging bracket adjustment knobs
10. Positioning handle
11. Hanging bracket

In the box :

• 1 x fixture,
• 5 x metal gobos &
• 1 x power cable

Installation

Before installing the fixture, the supporting structure (ie. truss) must be able to hold a minimum of 10 times the fixture’s weight without any deformation (eg. 15kg – 150kg point load). The fixture must be secured with a secondary safety attachment when being installed (ie. an appropriate safety cable). Never stand directly below the fixture when mounting, removing, and/or servicing.

Overhead installation requires experience and qualifications to calculate working load limits, the material being used at the installation area, and periodic safety inspections of the fixture and installation material. If you do not have the relevant experience and/or qualifications please do not attempt the installation yourself. The installation should be checked annually by a qualified person.

The Libretto Mini Bi-CCT Profile can be operated in several mounting positions as shown in the diagram above, hanging upside-down from the ceiling or truss, mounting sideways on the truss, or standing upright on a flat-level surface. Always use a safety wire as an
extra safety precaution to prevent damage/injury in the event a clamp fails (see the next page for clamp installation). Never use the carry handles for secondary attachments.

Operating instructions

Control Panel Menu:

• The OLED control panel situated on the front of the fixture allows the user to access the menu system to adjust the fixture settings.
• When the unit has been powered on the display will show “Libretto Mini Bi-CCT Profile”.
• The fixture will then return to its home screen.
• Pressing the “MENU” button once will take the user to the fixture’s main menu.
• Using the “UP” and “DOWN” buttons you can then navigate between the different options in the main menu.
• Pressing the “ENTER” button on one of these options allows you to access the sub-menu where you can use the “UP” and “DOWN” buttons to select the option value requiredd.
• Once the option/value has been selected press the “ENTER” button once more to confirm the setting.
• To exit out of any of the above options, press and hold the “MENU” button.

DMX Functions

| DMX Address| 1 -512| DMX Address Setting

Mode

| 2 Channel|

DMX Channel Setting––

3-1 Channel
3-2 Channel

DMX Fail

| Manual Mode|

DMX Fail Setting

Hold
Blackout
View DMX Value| View DMX Value

Fixture Settings

|

Dimmer Curve

| Linear|

Dimming Curve Setting

Square Law
Inverse Squ
S-Curve

Dimmer Speed

| LED|

Dimming Speed Setting

Halogen

Manual Mode

| Dimmer| 0 -255|

Function Mode Setting

Shutter| 0 -255
Warm white| 0 -255
Cool White| 0 -255
Color Macros| 0 -255

Display Settings

|

Display Inverse

| No|

Display Inverse Setting

Yes

Backlight Auto Off

| No|

Backlight Setting

Yes
Display Contrast| 0-30 (15)| Display Brightness Setting
Fixture Test| Auto Test| Auto Test

Fixture Information

| Fixture Use Time| XXX| Fixture Run Time
Firmware Version| CPU-A V 0.0 B 1.0| Fixture Firmware Version

Special Functions

|

Factory Settings

| No|

Default Factory Settings

Yes

2/3-1 channel mode:

Channel|

Value

|

Function

---|---|---
2 Channel| 3 Channel| Channel
1| 1| Dimmer| 000-255| Dimmer (0-100%)
2| 2| Colour Temp| 000-255| Colour Temp (2800-6000K)

–

|

3

|

CCT Macro

| 000-024| No Function
025-049| 2800K
050-074| 3200K
075-099| 3600K
100-124| 4000K
125-149| 4400K
150-174| 4800K
175-199| 5200K
200-224| 5600K
225-255| 6000K

3-2 channel mode:

DMX setup

Setting the DMX address:
The DMX mode enables the use of a universal DMX controller. Each fixture requires a “start address” from 1- 512. A fixture requiring one or more channels for control begins to read the data on the channel indicated by the start address. For example, a fixture that occupies or uses 7 channels of DMX and was addressed to start on DMX channel 100, would read data from channels: 100, 101, 102, 103, 104, 105, and 106. Choose a start address so that the channels used do not overlap. E.g. the next unit in the chain starts at 107.

DMX 512:
DMX (Digital Multiplex) is a universal protocol used as a form of communication between intelligent fixtures and controllers. A DMX controller sends DMX data instructions from the controller to the fixture. DMX data is sent as serial data that travels from fixture to fixture via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX fixtures (most controllers only have a data “out” terminal).

DMX linking:
DMX is a language allowing all makes and models of different manufacturers to be linked together and operate from a single controller, as long as all fixtures and the controller are DMX compliant.
To ensure proper DMX data transmission, when using several DMX fixtures try to use the shortest cable path possible. The order in which fixtures are connected in a DMX line does not influence the DMX addressing.

For example; a fixture assigned to a DMX address of 1 may be placed anywhere in a DMX line, at the beginning, at the end, or anywhere in the middle. When a fixture is assigned a DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that unit, no matter where it is located in the DMX chain.

DATA cable (DMX cable) requirements (for DMX operation):
This fixture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit. Your unit requires either a standard 3-pin or 5-pin XLR connector for data input/output, see images below. Further, DMX cables can be purchased from all good sound and lighting suppliers or Prolight Concepts dealers.

Please quote:

• 3-Pin : CABL10 – 2m  CABL11 – 5m CABL12 – 10m
• 5-Pin : CABL185 – 2m CABL187 – 5m  CABL188 – 10m

Notice:
Be sure to follow the diagrams below when making your cables. Do not connect the cable shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR outer casing. Grounding the shield could cause a short circuit and erratic behavior.

Pin Configuration

3-Pin| 5-Pin
Pin 1 – Ground
Pin 2 – Negative
Pin 3 – Positive
–| Pin 4 – N/C
–| Pin 5 – N/C

Line termination:
When longer runs of cable are used, you may need to use a terminator on the last unit to avoid erratic behavior. Using a cable terminator will decrease the possibility of erratic behavior. (3-pin – Order ref: CABL90,

• 5-pin – Order ref: CABL89)

5-pin XLR DMX connectors:
Some manufacturers use 5-pin XLR connectors for data transmission in place of 3-pin. 5-pin XLR fixtures may be implemented in a 3-pin XLR DMX line. When inserting standard 5-pin XLR connectors into a 3-pin line a cable adaptor must be used. The diagram below details the correct cable conversion.

Multiple fixture power linking

Power linking:
This fixture provides power linking via the power output on the rear allowing multiple units to be connected. The maximum number of fixtures that can be connected is 24 fixtures @ 240V or 12 fixtures @ 120V (including the first fixture). After the maximum number of fixtures are connected a new power run will need to be started.

Please note: Caution should be used when power linking other fixtures to the Libretto Mini Bi-CCT Profile as the power consumption of other fixtures will vary. Fixtures fitted with lamps often require 2/3 times more current on startup, these may require their power source.

Correct Disposal of this Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

www.prolight.co.uk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>