Ustellar UT888615 LED Flood Light User Guide
- June 16, 2024
- Ustellar
Table of Contents
Ustellar UT888615 LED Flood Light
LED Flood Light User Guide
Specifications
Model| Wattage| Max Luminous Flux| Color Temperature| Dimmable| Input Voltage|
Frequency| Waterproof Range| Beam Angle| Working Temperature
---|---|---|---|---|---|---|---|---|---
UT888615| 150W| 18000lm| 1| 2| –| –| –| –| –
UT888620| 200W| –| –| –| –| –| –| –| –
Components
- Heatsink
- Lock screw
- Reflector
- LED light source
- Tempered glass lid
- Bracket
- L-N-G cable (Black-Green-White)
Dimensions
Model: UT888615
- Length: 22cm/8.7in
- Width: 32.5cm/12.8in
- Height: 3.5cm/1.4in
- Weight: 4lb/1.8kg
- Max Projected Area: 100
Model: UT888620
- Length: 26.5cm/10.5in
- Width: 38.5cm/15in
- Height: 3.5cm/1.4in
- Weight: 4.85lb/2.2kg
- Max Projected Area: 130
Installation
Step A: According to the spacing of two screw bits on the bracket, drill two holes on the mounting panel.
Note: Maximum mounting height is over 5m.
Step B: Aim the bracket at the holes and fix it with two bolts.
Step C: Adjust the lighting direction up or down as per your need and plug in to power the light on.
Note: Make sure that the distance between the light and the object being lit is more than 1 meter to avoid high temperature caused by short distance.
Limitation of Indoor and Outdoor Use
- This light is waterproof and damp proof. It is protected against the rain, but it cannot be immersed in water.
- The mounting position of this light should be able to bear at least 10 times as heavy as the light.
- This light should be used in conditions that are good for heat dissipation.
- The light source of this luminaire is not replaceable. When the light source reaches its end of life, the whole luminaire shall be replaced.
Contact Us
Have some issue? No worries! Please reach us via these channels.
Our customer services team is more than happy to help.
Website: www.ustellar.com
Email: support@ustellar.com
Manufacturer: Shenzhen Ustellar Technology Ltd.
Address: 308A, 3/F, Building A, Youth Entrepreneur Hub, Jianshe East Road, Qinghua Community, Longhua Street, Longhua District, Shenzhen, CHINA 518000
E-manual
Step 1: Scan the QR code
Step 2: Click E-manual PDF file
Step 3: Read file online or download
Go paper-free, make life easier, and do something good for the environment.
FAQ
Q: How do I check if the light and parts are intact before installation?
A: Before installation, visually inspect the light and parts for any damage or missing components. Ensure everything is in good condition.
Q: Can I retrofit the light within the warranty period?
A: No, retrofitting the light within the warranty period is not recommended. It may void the warranty and can affect the proper functioning of the light.
Q: What voltage should I use to ensure the light works properly?
A: Please use the voltage indicated on the packaging to ensure the light works properly.
Q: What should I do if there is damage to the cord?
A: If there is any damage to the cord, immediately cut off the power and stop using it. Contact customer services for assistance.
LED Flood Light User Guide
Thank you for ordering from Ustellar. Set-up is easy and takes only a few minutes by following the instruc?ons.
Warning
- Please check if the light and the parts are intact before installa?on.
- Make sure to cut off power before installa?on.
- Please do not place this light in corrosive condi?ons.
- If there is any damage to the cord, please cut off the power and stop using it immediately.
- Please do not retrofit the light within the warranty period.
- To ensure the light works properly, please use the voltage indicated on the packing.
Parameters
| Model | UT888615 | UT888620 |
|---|---|---|
| Wa�age | 150W | 200W |
| Max Luminous Flux | 13500lm | 18000lm |
| Color Temperature | 5000K | |
| Dimmable | No | |
| Input Voltage | 120V AC | |
| Frequency | 50/60Hz | |
| Waterproof Ra�ng | IP66 | |
| Bean Angle | 120° | |
| Working Temperature | -20°C-40°C |
Components
Warning: if the ligh?ng for outdoor use, waterproof treatment should be done at the joints.
Dimension
Installation
-
Step A: According to the spacing of two screw bits on the bracket, drill two holes on the mounting panel.
Note: Maximum mounting height is over 5m. -
Step B: Aim the bracket at the holes and fix it with two bolts.
-
Step C: Adjust the lighting direction up or down as per your need and plug in to power the light on.
Note:
Make sure that the distance between the light and the object being lits is more than 1 meter, so as to avoid high temperature caused by short distance.
Limitation of Indoor and Outdoor Use
- This light is waterproof and damp proof. It is protected against the rain, but it cannot be immersed in water.
- The mounting position of this light should be able to bear at least 10 times as heavy as the light.
- This light should be used in condition that is good for heat dissipation. Its working temperature should be less than 45°C Too high the working temperature will cause serious lumen depression and affect lifespan of the light.
The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire shall be replaced.
Contact Us
Have some issue? No worries! Please reach us via these channels.
Our customer services team is more than happy to help.
www.ustellar.com
support@ustellar.com
Manufacturer: Shenzhen Ustellar Technology Ltd.
Address: 308A, 3/F, Building A, Youth Entrepreneur Hub, Jianshe East
Road, Qinghua Community, Longhua Street, Longhua District, Shenzhen, CHINA
518000
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>