SILVERSTONE ECM22 Dual M.2 to PCIe x4 NVMe SSD and SATA 6 G Adapter Card Instruction Manual
- June 16, 2024
- SilverStone
Table of Contents
SILVERSTONE ECM22 Dual M.2 to PCIe x4 NVMe SSD and SATA 6 G Adapter Card
Instruction Manual
Installation Chart
STEP 1
Please verify your M.2 SSD’s interface type. If it is SATA interface (B-Key),
please insert into SATA interface M.2 slot, if it is PCIe interface (M-Key),
please insert into PCIe interface M.2 slot.
STEP 2
If your M.2 SSD size is 22mm x 80mm, please refer to steps 2~3 directly, for others, please follow steps 1~3 for installation：
-
Remove screw posts A and screws B from the ECM22
-
Verify the length of your SSD and position the screw posts accordingly as shown in the illustration (screw post A on top with screw B tightening from the the bottom)
-
Insert M.2 SSD into interface slot then secure with screws B from the top to the screw posts
STEP3
If you install the PCIe interface M.2 SSD only, you may skip this step. Otherwise, connect SATA cable to adapter card to complete installation.
STEP4
Insert assembled ECM22 into the motherboard’s compatible PCIe (x4 or above) slot.
Specifications
| Model No. | SST-ECM22 |
|---|---|
| Interface | PCI Express x4 / SATA 6 Gbps |
| SSD Interface | M.2 (NGFF) |
| Module Key | SATA-based B key, PCIe x4 NVMe-based M key |
| Number of Drives | 2 |
| Support Length of M.2 SSD | 30mm, 42mm, 60mm, 80mm, 110mm |
| LED Indicator | Power LED: Red SATA M.2 SSD Read / Write LED: Orange PCIe M.2 |
SSD Read / Write LED: Blue
Operating system support| Microsoft Windows 7 (32bit/64bit), 8/8.1/10
(32bit/64bit) or future release version Mac OS 10.2.8 or above, Linux
Net Weight| 60g
Dimension| 121mm (W) x 11mm (H) x 157.3mm (D), 4.76″ (W) x 0.43″ (H) x 6.19″
(D)
Warranty Information
This product has a limited 1 year warranty in North America, Europe, and Australia.
For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor
Warranty terms & conditions
-
1. Product component defects or damages resulted from defective production is covered under warranty.
Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.- a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.
- b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)
- c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced.
- d) Warranty mark/stickers are not removed or broken.
Loss or damages resulted from conditions other than ones listed above are not covered under warranty
-
Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.
-
Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty, contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.
-
Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand purchaser.
-
You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.
-
If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone http://www.silverstonetek.com. Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping (or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping (or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a Return Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be posted on SilverStone’s official website. Please visit http://www.silverstonetek.com for the latest updates.
Additional info & contacts
For North America (usasupport@silverstonetek.com)) SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested.
Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All power supplies should be sent back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology
in USA by first downloading the “USA RMA form for end-users” form from the
below link and follow its instructions.
http://silverstonetek.com/contactus.php For Australia only
(support@silverstonetek.com) Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Please refer to above “Warranty terms & conditions” for further warranty
details.
SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New
Taipei City 235 Taiwan R.O.C. + 886-2-8228 1238 (standard international call
charges apply)
For Europe (support.eu@silverstonetek.de)
For all other regions
(support@silverstonetek.com))
