ADDER RMK15 Rack Mount User Guide
- June 5, 2024
- ADDER
Table of Contents
ADDER RMK15 Rack Mount
Using the RMK15 Adder rack mount
- Place a compatible module into each side of the rack mount so that their rear panels butt up against the center backstop.
- Locate the two supplied brackets.
- Place a bracket at the side of the rack mount so that they hold each unit in place (A).
- Install the rack-mount into your 19” rack frame and fully secure it using four bolts (B).
- Place the power adapters in the rear section of the rack mount and connect them to their respective modules.
- Make all other necessary connections to the modules.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>