Shark HV300 / CS100 Series Rocket Corded Stick Vacuum User Manual

June 9, 2024
Shark

Shark HV300 / CS100 Series Rocket Corded Stick Vacuum User Manual

Shark HV300 Series Rocket Corded Stick Vacuum

HV300 / CS100 Series
OWNER’S GUIDE

[Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.]

This article contains the Quick Start Guide for the HV300 Series Shark® Rocket® Corded Stick Vacuum. This supports the following product SKUs CS100, CS110, CS110BK, CS110GN, HV300, HV300C, HV300LA, HV300W, HV300WC, HV301, HV301C, HV301HX, HV301PL, HV301Q, HV302, HV302Q, HV303, HV305, HV306Q, HV307QBK, HV307QHX, HV307QPK, HV307QPR, HV307QW, HV308Q, HV310, QS301QBK, QS301QHB, QS301QIB, QS301QPK, QS301QPR, QS302QBK, QS302QBL, QS302QGN, QS302QPK, QS302QPL, UV450, UV450CCO, and UV450CCOFS.

WHAT’S INSIDE

A. Handheld Vacuum
B. Motorized Floor Nozzle
C. Wand
D. 5.5″ Crevice Tool
E. Pet Multi-Tool
F. Home & Car Detail Kit
G. Under-Appliance Wand

ASSEMBLY

ASSEMBLY

STORAGE

Onboard Hook
For compact, convenient storage, hang the handheld vacuum on the hook on the bottom of the wand, and wrap the power cord around the cord hooks. The unit stores easily in a closet or along a wall.

MAINTENANCE

Empty the dust cup

Empty the dust cup every time debris reaches the MAX fill line.

WARNING:
Hand wash filters only with water to prevent damage from cleaning chemicals.
Allow ALL filters to airdry completely before replacing them in the vacuum to prevent liquid from being drawn into electric parts.

Brushroll Maintenance

To access the brushroll, open the three locks on the bottom of the floor nozzle and lift off the cover. Remove any string, carpet fibers, or hair that may be wrapped around the brushroll. Loosen debris by cutting across the groove on the brushroll with a pair of scissors.

Brushroll Maintenance

VERSATILE FLOOR-TO-CEILING CLEANING

FLOOR CLEANING

1. Plug In Vacuum

Then place your foot gently on the floor nozzle and tilt the handle back.

Plug In Vacuum

2. Choose Setting
The Rocket® Ultra-Light Upright has a 2-speed power slider switch on the handle. Slide the power switch to the appropriate floor setting and start cleaning.

| Setting I
Gentle on bare floors and small area rugs.
The brushroll spins slowly to clean bare floors and small area rugs.
---|---
Setting II
Deep-cleans carpets by removing embedded dirt.
The brushroll spins faster to pick up debris below the surface of your carpets.
NOTE:
For deep cleaning per ASTM F 608
(embedded dirt in carpet) please use Setting II, carpet mode.

ABOVE-FLOOR CLEANING

1. While holding the vacuum upright, push the Nozzle Release button and pull the wand up to disconnect it from the floor nozzle.

OR

Press the Wand Release button on the top of the wand to disconnect it from the handheld vacuum.

ABOVE-FLOOR CLEANING

2. Attach desired cleaning accessory

accessory

NOTE : Use Setting I for all above-floor accessories.

For questions or to register your product, visit us online at sharkclean.com

HV302_QSG_REV_Mv7


DOWNLOAD

Shark HV300 / CS100 Series Rocket Corded Stick Vacuum:

Quick Start Guide – [Download PDF]

Owner’s Guide – [Download PDF]


Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals