marklin 88745 Class 64 Steam Locomotive Bubikopf Instruction Manual
- June 16, 2024
- marklin
Table of Contents
88745 Class 64 Steam Locomotive Bubikopf
Modell der Dampflok BR 64
88745
Safety notes
- WARNING! Sharp edges and points required for operation.
- The wire used for feeder connections to the track may be a maximum of 2 meters / 78 inches long.
- The LEDs in this item correspond to Laser Class 1 accor- ding to Standard EN 60825-1.
- Operation with conventional DC locomotive controllers (max. ±10 volts).
General Note to Avoid Electromagnetic Interference:
A permanent, flawless wheel-rail contact is required order to guarantee
operation for which a model is designed.
Do not make any changes to current-conducting parts.
Oil sparingly (max. 1 drop). Too
much oil frequently causes the commutator to become dirty and thereby leads to
damage to the armature.
| 1 | Pump, alternator | E179 838 |
|---|---|---|
| 2 | buffer | E167 989 |
| 3 | Linkage on the left | E232 812 |
| 4 | Linkage on the right | E232 793 |
| 5 | screw | E785 580 |
| 6 | engine | E280 528 |
| 7 | screw | E755 200 |
| 8 | Running frame | E389 865 |
| 9 | coupling | E166 264 |
| 10 | Front lighting unit | E250 391 |
| 11 | Rear lighting unit | E250 392 |
Note: Several parts are offered unpainted or in another color.
Parts that are not listed here can only be repaired by the Märklin repair
service department.
Details in the image may differ from the model.
www.maerklin.com/en/imprint.html
Gebr. Märklin & Cie. GmbH
Stuttgarter Str. 55 – 57
73033 Göppingen
Germany
www.maerklin.com
368669/03223/Sm2Ef
© Gebr. Märklin & Cie. GmbH