AQUA OPTIMA perfect pour 8.2L Perfect Pour Dispenser Instruction Manual

AQUA OPTIMA perfect pour 8.2L Perfect Pour Dispenser

Product Information

Specifications

• Lid
• Refill Cap
• Sliding Funnel
• Hopper
• Tank
• Dispenser Stand
• Refill Jug
• Tap

Product Usage Instructions

Assembly

To assemble the product:

1. Remove all packaging from the dispenser.
2. Remove the lid from the dispenser and wipe it with a clean damp cloth.
3. Remove the hopper and sliding funnel, and wash them thoroughly with the body.
4. Assemble the hopper into the dispenser body (1).
5. Fix the sliding funnel to the lid, then slide into place on the top of the dispenser using the tabs to guide (2), then slide backwards to engage the lid in place (3).
6. Assemble the tap by pressing it firmly into the outlet hole at the bottom of the body (3).
7. The refill jug is used to add water from the tap to the tank.

Preparing the Water Filter Cartridges

To prepare the water filter cartridges:

1. Remove all packaging from the filter cartridges.

Fitting the Filter into the Hopper

To fit the filter into the hopper:

1. Fit the Aqua Optima filter cartridge into the underside of the hopper and rotate clockwise to lock it into place. Ensure it is firmly secured (C).
2. Place the hopper back into the filter jug.
3. Refit the lid.
4. Fill the hopper with cool water and let it pass through the filter. Once it has been filtered, discard the water. Repeat the procedure once more (D).
5. Fill the hopper for a third time, and your water filter jug is now ready for use (E).

QUICK START GUIDE

WARNING: This product is intended to filter tap water only. Do not put water of unknown quality or that has been microbiologically contaminated into the product.

BEFORE USING THE DISPENSER FOR THE FIRST TIME

1. Remove all packaging from the Dispenser
2. Remove the lid from the dispenser and wipe it with a clean damp cloth.
3. Remove hopper and the sliding funnel, and wash them thoroughly with the body.
4. Assemble the hopper into the dispenser body (1).
5. Fix the sliding funnel to the lid, then slide into place on the top of the dispenser using the tabs to guide (2), then sliding backwards to engage the lid in place (3).
6. Assemble the tap pressing it firmly in the outlet hole at the bottom of the body (3).
7. The refill Jug is to add water from the tap to the tank.

PREPARING THE WATER FILTER CARTRIDGES

1. Remove all packaging from the filter cartridges. There may be a small residue of black carbon particles in the bag or on the surface of the cartridge; this is normal. These particles are harmless and are washed off during the preparation process.
2. Soak the cartridges in a bowl of water for 5–10 minutes to remove all the air bubbles (A).
3. Rinse for 1 minute under a running tap (B)
4. The filter cartridges are now ready for use.
5. Fit 2 cartridges as as per the following instructions.

FITTING THE FILTER INTO THE HOPPER

1. Fit the Aqua Optima filter cartridge into the underside of the hopper and rotate clockwise to lock into place. Ensure they are firmly secured (C)
2. Place the hopper back into the filter jug.
3. Refit the lid.
4. Fill the hopper with cool water and let it pass through the filter. Once it has been filtered, discard the water. Repeat the procedure once more (D).
5. Fill the hopper for a third time, your water filter jug is now ready for use (E).

AQUA OPTIMA 30-DAY FILTER CARTRIDGE

To ensure the best performance, the cartridges should be changed after the filtration of 200L of water, or after 4 weeks of use.

REPLACING THE FILTER CARTRIDGE

• Remove the lid and the sliding funnel and lift out the hopper.
• Hold the hopper and rotate the cartridge anticlockwise to release it.
• Prepare and insert the new cartridge as described above.

FOR BEST RESULTS

To prevent the filter from drying out, it should not be left unused for long periods. If such an extended period is anticipated (such as a holiday), then it is best to remove the filter and store it in a sealed plastic bag. The filter can then simply be prepared as per the original fitting instructions. Refer to Preparing the water filter cartridge above.

• Store the filter dispenser in the refrigerator or a cool place. It is important to store the dispenser out of direct sunlight and away from heat sources.
• Wash and rinse the hopper, the sliding funnel, and the body regularly. The lid should be wiped clean with a damp cloth.
• Use only cold or room-temperature water for filtering.
• Only use mild cleaning agents, never solvents or corrosive chemicals. Never use abrasive pads on this product.
• Do not use the filter jug for any other purpose than for filtering water.

SPECIAL USER INSTRUCTIONS

1. When assembling the lid into the body or taking it out of the body, note the position where the two arrows should align.
2. Please use the refill jug to fill the water from the tap and top up the dispenser. Pull out the Lid and open the filling cap.
3. When moving the dispenser in or out of the refrigerator, please empty the water inside the tank to prevent it from slipping out of your hand and causing injury. Hold the stands rim for better grip.
4. To remove the tap, squeeze the plastic tabs from the inside of the unit together and pull the tap out of the dispenser.

FAQ

Q: What type of water should I use with the product?

A: This product is intended to filter tap water only. Do not put water of unknown quality or that has been microbiologically contaminated into the product.

Q: How do I clean the dispenser?

A: Remove the lid from the dispenser and wipe it with a clean damp cloth. Wash the hopper and sliding funnel thoroughly with the body.

Q: How do I add water to the tank?

A: Use the refill jug to add water from the tap to the tank.

References

• Aqua Optima Water fIltration | Aqua Optima

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>