SpeedLink XEOX SL-6566-BK-01 Wireless Gamepad User Manual
- June 16, 2024
- speedlink
Table of Contents
SpeedLink XEOX SL-6566-BK-01 Wireless Gamepad User Manual
GET STARTED
CHARGING
First, charge the gamepad: using the mini-USB cable, connect the gamepad to
any free USB port on the PC or another USB power source. The gamepad’s upper-
right LED will flash during charging which takes up to 3 hours; be aware, the
initial charge may take longer. As soon as the LED stays lit, charging is
complete and you can disconnect the cable.
DRIVER INSTALLATION
Download the driver to install the XEOX software at
www.speedlink.com. Always use the latest driver
version. You need to install the driver to use the vibration function.
CONNECTING
Plug the USB receiver into a free USB port on your PC. The operating system
will detect the device automatically and it will be ready to use a few seconds
after that.
WIRELESS CONNECTION
Press and hold the Mode button for three seconds to switch the gamepad on.
Following that, the gamepad’s upper-left LED will start to flash. When you
first use the gamepad, press the Mode button again to establish the connection
to the PC. When doing so, place the gamepad near the receiver. The connection
process takes a few seconds and will take place automatically from now on when
the gamepad is switched on. The upperleft LED will remain lit if the
connection has been established successfully.
XINPUT AND DIRECTINPUT
You can switch between the gamepad’s two operating modes using the switch on the back: ‘X’ for XInput (for the majority of the latest games) and ‘D’ for DirectInput* (for all older and some newer games). Set the gamepad to the desired mode before starting a game. Switching during gameplay may stop the game identifying the controller correctly; if this happens, restart the game. Please consult the manual that accompanied the game, ask the publisher or try both modes to establish which mode works the best.
D-PAD MODE
In DirectInput* mode, press the Mode button briefly to switch between the two
digital D-pad modes. If the lower-left LED is lit, coolie-hat mode is active.
If this LED is not lit, the D-pad controls the axes of the left analogue
stick; in addition, the right analogue
stick takes over the function of buttons 1 to 4.
RAPID-FIRE FUNCTION
The rapid fire function allows a button to fire multiple times when pressed.
To do this, keep the Rapid button held depressed and press the button you want
to assign this function to. The lowerright LED will flash in rapid fire mode.
If you press this button again while pressing and holding the Rapid button,
the button will switch from rapid fire to auto fire mode. In doing so, the
lower-right LED will flash and the button will fire automatically in rapid
succession when pressed once. To reset the button back to single-fire mode,
press and hold the Rapid button and press the relevant button again.
SETTINGS
Test the gamepad’s functions by opening the Windows Control Panel and going to the Game Controllers option (Windows 7, 8, 10). In DirectInput* mode, you will also find the options there for the vibration function; for XInput games, configure the vibration functions in the game’s options settings. Please note, vibration functions only work if supported by the game.
STANDBY MODE
After seven minutes of inactivity (or after 30 seconds if a wireless
connection has not been established), the gamepad will switch to standby mode;
to reactivate it, press the Mode button. If the upper-right LED starts
flashing during use, charge the gamepad. You can use and charge the gamepad at
the same time. You can switch it off by pressing and holding the Mode button
for three seconds.
WARNING SYMBOLS AND MARKINGS
Li-ion battery
Further information: www.speedlink.com
CONFORMITY NOTICE IMPORTER/MANUFACTURER
Jöllenbeck GmbH
Kreuzberg 2
27404 Weertzen
GERMANY
Phone: +49 4287 9244 0
PRODUCT DETAILS:
Product no.: SL-6566-BK-01
Type description: XEOX Wireless Gamepad, black
THE PRODUCT COMPLIES WITH THE FOLLOWING DIRECTIVES
RED 2014/53/EU
RoHS 2011/65/EU
For a full declaration of conformity, please contact us at
www.speedlink.com/en/contact
Further information: www.speedlink.com
2019 Jöllenbeck GmbH. All rights reserved. Speedlink, the Speedlink word mark and the Speedlink swoosh are registered trademarks of Jöllenbeck GmbH. Windows and DirectInput are registered trademarks of Microsoft Corporation in the United States and other countries. The Instagram logo is a registered trademark/service mark of Instagram LLC. The Facebook logo is a registered trademark of Facebook Inc. The Twitter logo is a registered trademark of Twitter Inc. The YouTube logo is a registered trademark of YouTube LLC. All trademarks are the property of their respective owner. Jöllenbeck GmbH shall not be made liable for any errors that may appear in this manual. Information contained herein is subject to change without prior notice. Please keep this information for later reference.
Download PDF:SpeedLink XEOX SL-6566-BK-01 Wireless Gamepad User Manual