TECNO KG5K Storage LTE PTA Approved User Manual

TECNO KG5K Storage LTE PTA Approved

Know Your Phone

• Front Camera
• Volume + key
• Volume – key
• Power key

Modulation Mode and SAR Certification

The device uses various modulation modes for different technologies. It complies with international guidelines for exposure to radio waves. Specific Absorption Rate (SAR) values ​​for the head and body are specified with respective limits.

Cautionary Information

• Be cautious with earphone sound pressure to prevent hearing loss.
• Replacing the battery incorrectly or disposing of it inappropriately may lead to an explosion.
• Ensure the USB interface is version USB 2.0 when connecting to a product.
• The adapter should be installed near the equipment and be easily accessible.

Software Information

The TECNO SPARK 8c uses HiOS, which runs on Android™ OS. Android is a trademark of Google LLC.

FAQs

• How can I install the SIM/SD card in my TECNO SPARK 8c?
• Power off the phone and refer to the visual diagram provided in the User Manual for proper installation.
• What should I do if my phone is not charging?
• Ensure you are using the TECNO charger and cables provided with the phone. Check the connection and make sure the plug is correctly inserted.
• Are there any restrictions on using the TECNO SPARK 8c in certain countries?
• Yes, there may be restrictions in the 5GHz band in certain EU countries. Also, the WLAN function is limited to indoor use within specific frequency ranges.
• What are the SAR values ​​for the TECNO SPARK 8c?
• The SAR values ​​for the head and body are 1.546 W/kg and 1.219 W/kg, respectively, with specific distance and limit guidelines.

Mobile Phone

• Model: KG5k

Hereby, TECNO MOBILE LIMITED declares that this Mobile Phone complies with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Know your phone

1. Front Camera
2. Volume + key
3. Volume – key
4. Power key

SIM/SD card installation

1. Power off mobile.
2. Refer to the following picture for SIM / SD card installation.

Charging the phone

You can charge your device using a charger or by connecting it to the computer using a USB cable (which comes with the phone).

1. Please remind the front and back of the plug.
2. Use only the TECNO charger and cables. Other chargers or cables may damage the device. This will invalidate your phone warranty.

This device may be restricted for use, depending on the local network. Restrictions in the 5GHz band: According to 10(10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium

The WLAN function for this device is restricted to indoor use due to its operation in the 5.15 to 5.35 GHz frequency range.

Operating Frequency (RF)

• E-GSM900: 880-915MHz (TX),
• 925-960MHz (RX);
• DCS1800: 1710-1785 MHz (TX), 1805-1880 MHz (RX);
• WCDMA BAND I:1920-1980 MHz (TX),
• 2110 -2170 MHz (RX);
• WCDMA BAND VIII: 880-915MHz (TX),
• 925-960MHz (RX);
• LTE BAND1: 1920-1980MHz(TX),
• 2110-2170MHz(RX);
• LTE BAND3: 1710-1785MHz (TX),
• 1805-1880MHz(RX);
• LTE BAND7: 2500-2570 MHz
• (TX),2620-2690 MHz (RX);
• LTE BAND8: 880 -915MHz(TX),
• 925-960MHz(RX);
• LTE BAND20: 832-862 MHz (TX),791-821 MHz (RX);
• LTE BAND28: 703-733MHz (TX),
• 758-788MHz (RX);
• LTE BAND38: 2570 -2620 MHz(TX),
• 2570-2620MHz(RX);
• LTE BAND40: 2300-2400 MHz(TX), 2300
• -2400 MHz(RX);
• BT: 2402-2480MHz (TX/RX);
• Wi-Fi(2.4G): 2412-2472 MHz (TX/RX);
• Wi-Fi (5G): Band 1: 5150-5250 MHz (TX/RX);
• Band 2: 5250-5350 MHz(TX/RX);
• Band 3: 5470-5725 MHz(TX/RX);
• Band 4: 5725-5875 MHz (TX/RX);
• GPS:1.57542GHz(RX);
• FM:87.5-108 MHz(RX);

Modulation mode

• GMSK, 8PSK (GSM)
• BPSK, QPSK, 16-QAM (WCDMA)
• QPSK, 16-QAM, 64-QAM (LTE)
• GFSK, π/4-DQPSK, 8DPSK (BT)
• GFSK (BLE)
• BPSK/QPSK/16QAM/64QAM/DSSS/OFD
• M/ CCK (WIFI b/g/n)
• IEEE 802.11a/n:OFDM (BPSK / QPSK /
• 16QAM / 64QAM)
• BPSK (GPS)
• FM(FM)

RF Output power

• GSM900:33dBm±2dB
• GSM1800:30dBm±2dB
• WCDMA BAND
• I/VIII:24dBm+1.7dB/-3.7dB
• LTE
• BAND1/3/7/8/20/28/38/40:23dBm+2.7d
• B /-2.7dB
• BT:0-10 dBm
• Wi-Fi:14dBm +/-3dB

Specific Absorption Rate (SAR) Certification
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES

SPECIFICATIONS

CAUTION

1. Use carefully with the earphone maybe excessive sound pressure from earphones and headphones can cause hearing loss.
2. Risk of explosion if the battery is replaced by an incorrect type, dispose of used batteries according to the instructions.
   • disposal of a battery into a fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
   • leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
   • a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
3. The product shall only be connected to a USB interface of version USB 2.0.
4. The adapter shall be installed near the equipment and shall be easily accessible.
5. EUT Temperature: -10℃～+65℃ (Standalone). 5~+40℃(with adapter).
6. Adapter1: XCU32
   • Input: AC100-240V 50/60Hz 500mA
   • Output: DC 5.0V 2.0A
   • Adapter2: U100TKB
   • Input: 100-240V~50/60Hz 400mA Output: DC 5.0V 2.0A
7. The device complies with RF specifications when the device is used at 5 mm from your body, and the holder must not be of the metal composition.
8. To prevent possible hearing damage, do not listen at high volume levels for long periods.
9. Earphones and USB cables are shielded.

HiOS runs on AndroidTM OS.
Android is a trademark of Google LLC. https://manual-hub.com/.

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>