tp-link AX3600 Ceiling Mount Wi-Fi 6 Access Point Instructions
- June 16, 2024
- tp-link
Table of Contents
- tp-link AX3600 Ceiling Mount Wi-Fi 6 Access Point Instructions
- Product Information
- **Specifications
- Product Usage Instructions
- FCC Compliance Information Statement
- FCC RF Radiation Exposure Statement
- UKCA Mark
- Explanation of the symbols on the product label
- Mounting Requirements
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
tp-link AX3600 Ceiling Mount Wi-Fi 6 Access Point Instructions
Product Information
Regulatory Compliance
The Ceiling Mount AP (Access Point) model 1910013332 REV1.2.1 complies with
the following regulations:
- FCC Compliance: The device is restricted to indoor use only. It is prohibited to operate this device on oil platforms, cars, trains, boats, and aircraft, except for large aircraft flying above 10,000 feet. The use of transmitters in the 5.925-6.425 GHz band for unmanned aircraft systems is also prohibited.
- CE Mark Warning: This product is classified as a Class B device. In a domestic environment, it may cause radio interference, and the user may be required to take adequate measures.
- EU Declaration of Conformity: The device complies with the essential requirements and relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863. The original EU Declaration of Conformity can be found at https://www.tp-link.com/en/support/ce/.
- RF Exposure Information: The device meets the EU requirements (2014/53/EU Article 3.1a) regarding the limitation of exposure of the general public to electromagnetic fields for health protection. The device complies with RF specifications when used at a distance of 20cm from the body.
- UKCA Mark and Declaration of Conformity: The device complies with the essential requirements and relevant provisions of the Radio Equipment Regulations 2017 in Great Britain. The original UK Declaration of Conformity can be found at https://www.tp-link.com/support/ukca. Please note that this device is only allowed for indoor use in Great Britain.
- Canadian Compliance Statement: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the condition that the device does not cause interference.
**Specifications
**
The operating frequency and maximum transmitted power for different models are as follows:
Model | Operating Frequency | Maximum Transmitted Power |
---|---|---|
AP9635 V1 / AP9650 / AP9670 | 2412 MHz – 2472 MHz |
5150 MHz – 5250 MHz
5250 MHz – 5350 MHz
5470 MHz – 5725 MHz| 20dBm
23dBm
23dBm
30dBm
AP9635 V2 / AP9665| 2402 MHz – 2480 MHz
2412 MHz – 2472 MHz
5150 MHz – 5250 MHz
5250 MHz – 5350 MHz
5470 MHz – 5725 MHz| 10dBm
20dBm
23dBm
23dBm
30dBm
AP9778| 2402 MHz – 2480 MHz
2412 MHz – 2472 MHz
5150 MHz – 5250 MHz
5250 MHz – 5350 MHz
5470 MHz – 5725 MHz
6105 MHz – 6425 MHz| 10dBm
20dBm
23dBm
23dBm
30dBm
23dBm
Product Usage Instructions
Indoor Use Only
The Ceiling Mount AP is designed for indoor use only. It should not be used
on oil platforms, cars, trains, boats, or aircraft unless it is a large
aircraft flying above 10,000 feet. Ensure that the device is not used to
control or communicate with unmanned aircraft systems.
CE Mark Warning
In a domestic environment, the Ceiling Mount AP may cause radio
interference. If this occurs, the user may be required to take adequate
measures to mitigate the interference.
RF Exposure Information
To comply with EU requirements and ensure health protection, maintain a
distance of at least 20cm between the device and your body when using it.
UKCA Mark and National Restrictions
In Great Britain, the Ceiling Mount AP can only be used indoors. Compliance
with the Radio Equipment Regulations 2017 is mandatory.
Canadian Compliance Statement
To prevent interference, ensure that the device does not cause any
disruption when operating in Canada.
Frequently Asked Questions (FAQ)
- Q: Can I use the Ceiling Mount AP outdoors?
- A: No, the Ceiling Mount AP is designed for indoor use only. Using it outdoors may violate regulatory compliance and affect its performance.
- Q: Can I operate the Ceiling Mount AP on an oil platform?
- A: No, operating the Ceiling Mount AP on oil platforms is prohibited due to regulatory restrictions.
- Q: Can I use the Ceiling Mount AP on an aircraft?
- A: Generally, the operation of the Ceiling Mount AP on aircraft is prohibited. However, it is allowed in large aircraft flying above 10,000 feet.
- Q: Can I control unmanned aircraft systems with the Ceiling Mount AP?
- A: The use of transmitters in the 5.925-7.125 GHz band for controlling unmanned aircraft systems is prohibited. Do not use the Ceiling Mount AP for this purpose.
FCC Compliance Information Statement
- Product Name : Omada Pro Ceiling Mount Access Point
- Model Number : AP9635 / AP9650 / AP9665 / AP9670 / AP9778
- Responsible party: TP-Link USA Corporation
- Address : 10 Mauchly, Irvine, CA 92618
- Website : https://www.tp-link.com/us/
- Tel : +1 626 333 0234
- Fax : +1 909 527 6804
- E-mai l: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant applies to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”
For AP9778:
FCC regulations restrict the operation of this device to indoor use only. The
operation of this device is prohibited on oil platforms, cars, trains, boats,
and aircraft, except that operation of this device is permitted in large
aircraft while flying above 10000 feet. Operation of transmitters in the
5.925-6.425 GHz band is prohibited for control of or communications with
unmanned aircraft systems.
We, TP-Link USA Corporation, have determined that the equipment shown above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made to the equipment and the equipment is properly maintained and operated.
CE Mark Warning
This is a class B product. In a domestic environment, this product may
cause radio interference, in which case the user may be required to take
adequate measures.
OPERATING FREQUENCY
(the maximum transmitted power)
For AP9635 V1 / AP9650 / AP9670:
- 2412 MHz -2472 MHz (20dBm)
- 5150 MHz -5250 MHz (23dBm)
- 5250 MHz -5350 MHz (23dBm)
- 5470 MHz -5725 MHz (30dBm)
For AP9635 V2 / AP9665:
- 2402 MHz-2480 MHz (10dBm)
- 2412 MHz -2472 MHz (20dBm)
- 5150 MHz -5250 MHz (23dBm)
- 5250 MHz -5350 MHz (23dBm)
- 5470 MHz -5725 MHz (30dBm)
For AP9778:
- 2402 MHz-2480 MHz (10dBm)
- 2412 MHz -2472 MHz (20dBm)
- 5150 MHz -5250 MHz (23dBm)
- 5250 MHz -5350 MHz (23dBm)
- 5470 MHz -5725 MHz (30dBm)
- 6105 MHz -6425 MHz (23dBm)
EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/53/EU,
2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU Declaration of
Conformity may be found at https://www.tp-link.com/en/support/ce/.
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the
limitation of exposure of the general public to electromagnetic fields by way
of health protection. The device complies with RF specifications when the
device is used at 20cm from your body.
National Restrictions
For AP9635 / AP9650 / AP9665 / AP9670:
- Frequency band : 5150 – 5250 MHz:
Indoor use:
Inside buildings only. Installations and use inside road vehicles and train
carriages are not permitted. Limited outdoor use: If used outdoors, equipment
shall not be attached to a fixed installation or the external body of road
vehicles, a fixed infrastructure or a fixed outdoor antenna. Use by unmanned
aircraft systems (UAS) is limited to within the 5170 – 5250 MHz band.
Frequency band: 5250 – 5350 MHz:
Indoor use:
Inside buildings only. Installations and use in road vehicles, trains and
aircraft are not permitted. Outdoor use is not permitted.
- Frequency band : 5470 – 5725 MHz:
Installations and use in road vehicles, trains and aircraft and use for unmanned aircraft systems (UAS) are not permitted.
For AP9778:
- Frequency band: 5150 – 5250 MHz:
Indoor use : Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted. Limited outdoor use: If used outdoors, equipment shall not be attached to a fixed installation or the external body of road vehicles, a fixed infrastructure or a fixed outdoor antenna. Use by unmanned aircraft systems (UAS) is limited to within the 5170 – 5250 MHz band.
- Frequency band : 5250 – 5350 MHz:
Indoor use: Inside buildings only. Installations and use in road vehicles, trains and aircraft are not permitted. Outdoor use is not permitted.
- Frequency band: 5470 – 5725 MHz:
Installations and use in road vehicles, trains and aircraft and use for unmanned aircraft systems (UAS) are not permitted.
- Frequency band 5945 -6425MHz:
Restricted to indoor use, including in trains with metal-coated windows and aircraft. Outdoor use, including in road vehicles, is not permitted.
UKCA Mark
UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of the Radio Equipment Regulations
2017. The original UK Declaration of Conformity may be found at https://www
.tp-link.com/support/ukca
National Restrictions
Attention : This device may only be used indoors in Great Britain.
Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Caution
For AP9635 / AP9665:
The device for operation in the band 5150–5250 MHz is only for indoor use to
reduce the potential for harmful interference to co-channel mobile satellite
systems; 5150 MHz to 5350 MHz is restricted to indoor operations in Hong Kong.
For AP9650 / AP9670 / AP9778:
The device for operation in the band 5150–5250 MHz is only for indoor use to
reduce the potential for harmful interference to co-channel mobile satellite
systems; 5150 MHz to 5350 MHz is restricted to indoor operations in Hong Kong.
DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470-5600MHz, and 5650-5725MHz.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 31cm (for AP9665) / 20cm (for other models) between the
radiator & your body.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
Safety Information
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use a damaged charger or USB cable to charge the device.
- Do not use any other chargers than those recommended.
- Do not use the device where wireless devices are not allowed
- The adapter shall be installed near the equipment and shall be easily accessible.
- Operating Temperature: 0℃ ~ 40℃ (32 ℉ ~ 104 ℉ )
- This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices. Always keep the product and its power adapter more than 15 cm (6 inches) away from any pacemakers or other implanted medical devices. If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Explanation of the symbols on the product label
Note : The Equipment marking is at the bottom of the device. Symbols may vary from product.
Mounting Requirements
For safety, we recommend you use the original screws in the package when mounting. The following are alternatives to mount the device on the wall:
- (For AP9635 / AP9650 / AP9665 / AP9670) Use 4 screws which comply with ANSI B1.1 4# standard and are longer than 15 mm.
- (For AP9778) Use 6 screws which comply with ANSI B1.1 4# standard and are longer than 15 mm.
References
- Link: Simple, secure one-click payments
- CE Regulatory Compliance | TP-Link
- Regulatory Compliance | TP-Link
- WiFi Networking Equipment for Home & Business | TP-Link
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>