rizoma BS232 Reverse Radial Mirror Biposition Bronze User Manual
- June 4, 2024
- rizoma
Table of Contents
rizoma BS232 Reverse Radial Mirror Biposition Bronze
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future. RIZOMA accepts no liability for any damage, of any kind, which may be caused, directly or indirectly, to persons or things as a result of incorrect assembly or failure to observe all the assembly instructions. We also invite you to comply with the provisions of the Highway Code and Traffic rules and/or to additional regulations in force in your Country.
General conditions
Attention:
This component comes assembled for shipping purposes only. Tighten all
fasteners to appropriate torque specifications before riding. Descriptions
preceded by this symbol contain information, instructions, or procedures,
which, if not followed, may result in death or serious injury.
- Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
- After installing any Rhizome product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike. Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case never try to repair or modify the
Rizoma products or their components, always replace with Rizoma original
components. Rizoma products may not be compatible with your motorcycle or with
other aftermarket equipment installed before. For your safety Rizoma suggests
to always contact your RIZOMA dealer.
O.E.M.: original equipment manufacturer.
the Reverse Retro mirror is made from billet aluminum. More compact, unmistakable design. Featuring a classic, timeless look, its simple lines and handlebar mount make it both a sought-after Classic and suitable for a range of styles. The adjustment system and anti-dazzle glass guarantee optimal versatility and comfort.
Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components. Warning: Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others.
WARNING: TO CLEAN YOUR MIRROR DON’T USE DETERGENT, AGGRESSIVE PRODUCTS OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR MIRROR, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER. Consult the website or contact the authorized dealer to choose the universal adapter.
Some of our products may not be approved for road circulation in the countries
where homologation is required. Thus RIZOMA® sol declines any responsibility
for a different use of its products.
MONTAGGIO SPECCHIETTO SU MANUBRIO INSTALL MIRROR ON HANDLEBAR
Step 1
ATTENZIONE: UTILIZZARE LA BOCCOLA CORRETTA CONTROLLAND0 IL DIAMETRO
ESTERNO DEL MANUBRIO.
WARNING: TO USE THE PROPER BUSHING CHECK THE EXTERNAL DIAMETER OF
HANDLEBAR.
MONTAGGIO SPECCHIETTO CON ADATTATORE UNIVERSALE INSTALL MIRROR WITH UNIVERSAL
ADAPTER
Step 2
ATTENTION: CLEAN AND DEGREASE THE MIRROR SHAFT HOLE, THE EXTERNAL PART OF THE THREAD BUSHING AND THE UNIVERSAL ADAPTER.
TIGHTENING THE SCREWS
Step 3
ATTENTION: LUBRICATE THE THREADS AND THE UNDER HEAD OF THE SCREWS WITH GREASE.
INSTALL RH MIRROR
Step 4
WARNING: FOR THE CORRECT MOUNTING OF RIGHT SIDE CHECK THAT BETWEEN THE HANDLEBAR CAP AND THE THROTTLE GRIP THERE IS MINIMUM 1mm.
ADJUSTMENT MIRROR
- Find the correct position of the mirror and tighten the screw.
Step 5 
Step 6
INSTALL CAP
WARNING: USE THE INCLUDED CAPS TO CLOSE THE HOLE FIXING OF THE OEM MIRROR.
Step 7
- RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury.
- The action depicted is performed by professionals under strictly controlled riding conditions.
- Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy.
- All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full face helmet), that has been approved by ANSI , SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full finger gloves, boots, and body armor.
- Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle.
- Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.
Legal notes
- Some of our products may not be approved for road circulation in the countries where homologation is required. Thus RIZOMA® srl declines any responsibility for a different use of its products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>