rizoma BSFR002 Indicator Adaptor User Manual

June 4, 2024
rizoma

rizoma BSFR002 Indicator Adaptor

General conditions

Attention: This component comes assembled for shipping purposes only. Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.

  1. Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
  2. For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
  3. After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.
    Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case never try to repair or modify the Rizoma products or their components, always replace with Rizoma original components.
    Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety Rizoma suggests to always contact your RIZOMA dealer.
    O.E.M.: original equipment manufacturer.

ABOUT PRODUCT

  • Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components. Warning: Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others.
    WARNING: TO CLEAN YOUR PRODUCT DON’T USE DETERGENT, AGGRESSIVE PRODUCTS OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR PRODUCT, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER.

  • Some of our products may not be approved for road circulation in the countries where homologation is required. Thus RIZOMA® srl declines any responsibility for a different use of its products.

rizoma BSFR002 Indicator Adaptor-fig2
rizoma BSFR002 Indicatrizoma BSFR002 Indicator Adaptor-fig3or Adaptor-
fig2

REMOVE COMPONENTS FROM FR060

rizoma BSFR002 Indicator Adaptor-fig4

INSTALL ADAPTER

rizoma BSFR002 Indicator Adaptor-fig5

INSTALL ADAPTER ON CHASSIS

rizoma BSFR002 Indicator Adaptor-fig6

INSTALL FR060 RH SIDE

rizoma BSFR002 Indicator Adaptor-fig7

INSTALL MIRROR RH SIDE

rizoma BSFR002 Indicator Adaptor-fig8

WARNINGS INSTALL RH SIDE

rizoma BSFR002 Indicator Adaptor-fig9

INSTALL FR060 RH SIDE

rizoma BSFR002 Indicator Adaptor-fig10
rizoma BSFR002 Indicator Adaptor-fig11

INSTALL MIRROR LH SIDE

rizoma BSFR002 Indicator Adaptor-fig12

INSTALL FR060 LH SIDE

rizoma BSFR002 Indicator Adaptor-fig13
rizoma BSFR002 Indicator Adaptor-fig14
rizoma BSFR002 Indicator Adaptor-fig15

ORIENTATION TURN SIGNAL

rizoma BSFR002 Indicator Adaptor-fig16

Warnings

  • RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury.
  • The action depicted is performed by professionals under strictly controlled riding conditions.
  • Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy.
  • All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full face helmet), that has been approved by ANSI , SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full finger gloves, boots, and body armor.
  • Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle.
  • Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.

Legal notes

  • Some of our products may not be approved for road circulation in the countries where homologation is required.
  • Thus RIZOMA® srl declines any responsibility for a different use of its products.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals