LUXCEO P520 RGB Fill Light Stick Instruction Manual
- June 10, 2024
- Luxceo
Table of Contents
P520 RGB Fill Light Stick
Instruction Manual
RGB FILL LIGHT STICK
Executive Standard: G8 7000.1-2015 G8 7000.204-2008
P520
P520 RGB Fill Light Stick
Thank you for choosing our products. Please read the user manual carefully before use and follow instructions to ensure proper use
Product Features
- Versatile light, provides 36000 colors and 12 light effects
- Easily adjust color temperature, intensity, hue and saturation
- Mount on a tripod with the 1/4″ thread on the bottom on of the light
- Built-in battery, used in more scenarios
- Portable and easy to carry
Packing List
light Focture 1 | Lanyard1 |
---|---|
Carry Case 1 | Remote Control xf |
Barn0door xf | Qualified Certificate 1 |
USB Charging Cable 1 | User Manual 1 |
Product Overview
A ught Cover
C Display
E Lanyard Hole
G Barndoor
I Down Button
K Mode Button
M Arrow Button| B Type-C Pont
D IR receiver
F Threaded Mount (1/4 Thread)
H Aluminum Heatsink Housing
J Power Button
L up Button
---|---
Attaching Barndoor
- Installation Match the night side of the light stick with the barndoor Slip it over the groove on the barndoor and push in. (see figure 1)
- Detachment: Hold the handle and push the reflector from the bottom up to detach. (see figure 2)
Operation
- Power button: press and hold it to turn the light on/off
- Mode button: press it to switch among HIS, CCT, Scene modes
- Arrow button press it to select options under HIS, CCT Scene odes
- Up and down button adjust the value
Display and Charging Description
- CCT Mode. press M button to select Cc then press arrow button to choose from color temperature, brightness and turbo mode, adjust the value by + button (Turbo: press arrow buttton to select normal, then press by +” button to go into Turbo mode. Default Cries median and brightness will go down if the temperature is too high)
- HIS Mode: press M button to select HSI, then press arrow button to choose from H, S, I and brightness, adjust the value by + “-” button
- Scene Mode press M button to select Scene, then press arrow button to choose from light effect and brightness, adjust the value by + “-” button. 12 special effect modes are as follows
Strobe Mode
1. Lightning
2Paparazzi
3. Red $SOS| RGB Mode:
7 Slow RGB Cycle
8.Fast RGB Cycle
9. Fireworks
---|---
warning Mode:
4. Police Car
• Ambulance
6. Fire True| Scene Mode
10. Sober Bar
11 Disco
12. Candle - Charging Description three are five bars of battery on the screen which indicate remaining battery charge in 20% inoreserent When only one bar left and it keep flashing, it means that the battery is below 5% and need to recharge. A charging icon appears on screen during charging and five bars of battery will glow steady when it is fully charged. Charging time is approximately 2 hours. (with 5V/3A, 9N2A, 12V/1.5A adapter)
Remote Operation
- The light can be controlled b IR remote (to preserve battery life, the remote won t work when the light is turned off by power button’)
- Effective remote control distance up to 7 meters. Make sure the remote point to receiver darning use
- Remove the battery insulation sheet before ate01p0ig to use the remote control.
- Remote control description is as follows
Specification
Name | RGB FiI Light Stick |
---|---|
Model No | P520 |
Input | DC 5V/3A 9V/2A 12V/1.5A |
Rated Power | 18w |
Power on Turbo Mode | 36W |
Brightness | 1583lu0/0.5m 479lux/1m |
Brightness on Turbo Mode | 3145lux0.5m 904lux/1m |
Charging Port | Type-C |
CCT | 2500K-6500K |
Hue | 0-360° |
CRI | 295 |
Run Time | >1hrs |
Battery | 2600mAh 7 4V 19 24w |
Charging Time | 2hrs |
Working Temperature | 0-40C |
Storage Environment | -10-50C |
Fixture Dimension | 52044.532.5mm |
Fixture Weight | 425g |
Note: the light sauce of fixture is not replaceable. Please replace the entire lamp when it reach end of life
PLEASE NOTE
- Keep the batteries away from fires and high temperatures
- Do not place the light in fie in case of explosion
- Do not modify or take this product apart. Don’t shake, beat or strike it
- Please check the voltage requirements before using to avoid damage to the light
- Children should use this product in the company of their guardians. To avoid eye injury, please do not look directly at the glowing surface
- Please charge the light at least once every three months. And don’t put it into water or wet environment while charging
- Please plug out the power cord why not using this light to avoid injury and damage, And long press to shut down
- Please do not put it in damp environment or water when charging
Customer Information Attn :
Tel:…..
Add: …..
Product Information
Product Model:……………
Purchase Date:……………
Product Serial Number:
Product Maintenance Record
Date| maintenance Center Name| Fault and Handling| Firth
Date
---|---|---|---
| | |
| | |
| | |
| | |
The Dealer Information
Company Name:……
Purchase Date…….
Add:…………………
Signature:……
The user to save Lost not fill V2.0
SHENZHEN DISCOVER TECHNOLOGY CO., LTD
Add: 4F, 4B, Haikai High-tech Park 387 Heating Rd. Danang St.
Longhead District, Shenzhen 518109 China.
Tel: 400-6618-101
Web: www.luxceo.co
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>