LUXceo P400S RGB Fill Light Stick Tube Light Lamp User Manual

LUXceo P400S RGB Fill Light Stick Tube Light Lamp

Product Information

P400 & P400S

The P400 and P400S are products designed for a specific purpose.
The product manual provides information about the product and its usage. The product is designed to work with CMYK color codes, with a combination of C0 M0 Y0 K100. The product manual also mentions the need to keep the design drawing frame for check and to provide Pantone color if any.

Product Usage Instructions

1. Ensure that the design drawing frame is kept for reference during usage.
2. If using Pantone colors, provide the necessary color codes.
3. The product is designed to work with CMYK color codes, with a combination of C0 M0 Y0 K100.
4. Refer to the product manual for further instructions and guidelines on usage.

Thank you for choosing our products. Please read the user manual carefully before use and follow instructions to ensure proper use.

Product Features

1. Versatile light, provides 36000 colors and 12 light effects.
2. Easily adjust color temperature, intensity, hue and saturation.
3. Mount on a tripod with the 1/4″ thread on the bottom on of the light.
4. Built-in battery, used in more scenarios.
5. Portable and easy to carry.

Packing List

• Light Fixture ×1
• USB Charging Cable ×1
• User Manual ×1
• Lanyard ×1
• Remote Control ×1
• Qualified Certificate ×1

Product Overview

• A. Light Cover
• B. Type-C Port
• C. Threaded Mount (1/4″ Thread)
• D. Display
• E. IR Receiver
• F. Lanyard Hole
• G. Aluminum Heatsink Housing
• H. Down Button
• I. Power Button
• J. Mode Button
• K. Up Button
• L. Arrow Button

Operation

1. Power button: press and hold it to turn the light on/off
2. Mode button: press it to switch among HIS, CCT, Scene modes.
3. Arrow button: press it to select options under HIS, CCT Scene modes.
4. Up and down button: adjust the value.

Display and Charging Discription

1. CCT Mode: press M button to select CCT, then press arrow button to choose from color temperature, brightness and turbo mode, adjust the value by “+” ,”” button (Turbo: press arrow button to select normal, then press by “+” ,”” button to go into Turbo mode. Default CCT is median and brightness will go down if the temperature is too high).
2. HIS Mode: press M button to select HSI, then press arrow button to choose from H, S, I and brightness, adjust the value by “+” 66 3 button.
3. Scene Mode: press M button to select Scene, then press arrow button to choose from light effect and brightness, adjust the value by “+” “-” button. 12 special effect modes are as follows:

Strobe Mode:

1. Lightning

2. Paparazzi

3. RedSOS
   Warning Mode:

4. Police Car

5. Ambulance

6. RreTruclc
   RGB Mode:

7. Slow RGB Cycle

8. Fest RC3B Cycle

9. Fireworks
   Scene Mode:

10. Sober Bar

11. Disco

12. Candle

Charging Description: three are five bars of battery on the screen which indicate the remaining battery charge is a 20% incresement. When only one bar is left and it keeps flashing, which means that the battery is below 5% and needs to recharge. A charging icon appears on the screen during charging and five bars of the battery will glow steadily when it is fully charged. Charging time is approximately 2 hours.

Remote Operation

1. The light can be controlled by an IR remote (to preserve battery life, the remote won’t work when the light Is turned off by the power button)
2. Effec:tive remote control distance up to 7 meters. Make sure the remote poln1 lo receiver during use.
3. Remove the battery insulation sheet before attempting to use the remote control.
4. The remote control description Is as follows:

Specification

P400

Note: the light source of the future is not replaceable. Please replace the entire lamp when it reaches the end of its life.

P400S

Note: the light sauce of the fixture is not replaceable. Please replace the entire lamp when it reaches the end of its life.

PLEASE NOTE

1. Keep the batteries away from fires and high temperatures.
2. Do not place the light in fire in case of explosion.
3. Do not modify or take this product apart. Don’t shake, beat or sbike it
4. Please check the voltage requirements before using to 8\/0ld damage to the light.
5. Children should use this product In the company of their guardians. To avoid eye injury, please do not look directly at the long surface.
6. Please charge the light at least once every three months. And don’t put it into water or wet environment while charging.
7. Please plug out the power rord while not using this light to avoid injury and damage, And long press to shut down.
8. Please do not put it in damp environment or water when charging.

Customar Information
Attn: Tel:
Add:
Product Information
Product Model:
Product Serial Number:
Purchase Date:
Product Maintenance Record

The Pealer Information
FiniohWN!
Company Name:
Purshase Date:
Add:
Signature:

The user to save Lost not flll V2.0

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>