LINDY 43390 USB 2.0 Type C Cat Extender User Manual

June 16, 2024
LINDY

LINDY Logo 100m USB 2.0 Type C Cat.6 Extender
User Manual
No. 43390
lindy.com

Safety Instructions

! WARNING !

Please read the following safety information carefully and always keep this document with the product.
Failure to follow these precautions can result in serious injuries or death from electric shock, fire or damage to the product.
Touching the internal components or a damaged cable may cause electric shock, which may result in death.
This device is a switching type power supply and can work with supply voltages in the range 100 – 240 VAC For worldwide usability four different AC adapters are enclosed: Euro type, UK type, US/Japan type and Australia/New Zealand type. Use the appropriate AC adapter as shown in the picture and ensure it is firmly secured in place and does not detach by pulling before installing into a power socket.
To reduce risk of fire, electric shocks or damage:

  • Do not open the product nor its power supply. There are no user serviceable parts inside.
  • Only qualified servicing personnel may carry out any repairs or maintenance.
  • Never use damaged cables.
  • Do not expose the product to water or places of moisture.
  • Do not use this product outdoors it is intended for indoor use only.
  •  Do not place the product near direct heat sources. Always place it in a well-ventilated place.
  • Do not place heavy items on the product or the cables.
  • Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket

Instructions for Use of Power Supply

To connect the adapter:
Slide the desired plug adapter into the power supply and rotate clockwise until it locks into place.
To remove the adapter:
Press the push button latch.
While pressed, rotate the adapter anticlockwise.

Introduction

Thank you for purchasing the 100m USB 2.0 Type C Cat.6 Extender. This product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.
The Lindy 100m USB 2.0 Type C Cat.6 Extender can be used to extend the distance between a USB peripheral device and a USB Type C equipped host computer by up to 100m. It consists of a transmitter unit which connects to the computer and a receiver unit that connects to the device. Standard Cat.5e/6 network cable (not included) is then used to bridge the connection between the two units. For best performance and compatibility, we recommend the use of solid core patched cables.
For added convenience this USB 2.0 Extender is supplied with a power supply, which can be connected should additional power be required.

Package Contents

  • Transmitter Unit
  • Receiver Unit
  • Multi-Country Power Supply, 5VDC 2A with 3.5/1.35mm DC connector
  • LINDY Manual

Features

  • Extends a single USB port up to 100m using Cat.5e/6 network cable (not included)
  • Plug & Play installation, OS independent
  • Perfect for use with USB 2.0 devices such as storage devices, printers, scanners, mice and keyboards*
  • Supports USB 2.0 High Speed and USB 1.1 Full Speed / Low Speed devices
  • Supports distances up to 100 meters using Cat.5e/6 solid core cables
  • Further devices can be connected by adding an additional hub
  • Multi-Country Power Supply for receiver included

*Please note: This extender might not support USB devices that require high bandwidths such as FullHD webcams.

Specification

  • USB Standard: USB2.0
  • Supported Bandwidth: 480Mbps
  • Maximum Distance: 100m (328.08ft)
  • Transmission Medium: Cat. 5e/6 UTP network cable
  • Chipset: CH317Q, CH9317, RTL8211E
  • Special Features: Supports isochronous data transfer
  • Transmitter Input: USB Type C (Male)
  • Transmitter Output: RJ45 (Female)
  • Receiver Input: RJ45 (Female)
  • Receiver Output: USB Type A (Female)
  • Power: 3.5/1.35mm DC socket
  • Dimensions WxDxH: 69x36x22mm (2.72×1.42×0.87in)
  • Housing Material: Plastic
  • Net Weight: 0.05kg (0.11lb)
  • Operating Temperature: 0° – 40°C (32°F – 104°F)
  • Storage Temperature: -10°C – 60°C (14°F – 140°F)
  • Humidity: 0 – 80% RH (non-condensing)
  • Power Requirements: 5V DC 2A

Installation

  1. Connect the transmitter to an available USB Type C port on the host computer.
  2.  Place the receiver unit near the USB device in the desired remote location and connect it with the USB Type A female port.
  3. Connect the power adapter to the receiver unit.
  4. Connect the transmitter to the receiver unit by using a CAT.5e/6 cable (not included!).

The Extender is now ready for operation.
Lindy regularly checks and tests our product range to ensure maximum compatibility and performance.
For the most up to date version of this manual, please refer to your local Lindy website, search for the relevant part number and find the manual under Downloads.

Recycling Information

WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products
Europe, United Kingdom
**** In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process. Each individual EU member state, as well as the UK, has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.

CE/FCC Statement

CE Certification
LINDY declares that this equipment complies with relevant European CE requirements.

Hersteller / Manufacturer (EU):
LINDY-Elektronik GmbH
Markircher Str. 20
68229 Mannheim
Germany
Email: [email protected],
T: +49 (0)621 470050
Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England
[email protected], T: +44 (0)1642 754000

Tested to comply with
FCC standards.
For home and office use
No. 43390
1st
Edition, April 2023
lindy.com

Documents / Resources

| LINDY 43390 USB 2.0 Type C Cat Extender [pdf] User Manual
43390 USB 2.0 Type C Cat Extender, 43390, USB 2.0 Type C Cat Extender, Type C Cat Extender, Cat Extender, Extender
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

LINDY User Manuals

Related Manuals