BORMANN BSS2100 Electric Palm Sander Instructions
- June 16, 2024
- BORMANN
Table of Contents
BORMANN BSS2100 Electric Palm Sander
Specifications
- Technical Specifications
- Power: 180W
- No-load speed: 0-11000 rpm/min
- Use: Ideal for using on vertical surfaces such as doors and walls, for light to medium sanding tasks
- Sanding belt size: 90 x 187 mm
- Oscillation diameter: 2 mm
- Power Cord length: 2 m
- Voltage: 230V
- Frequency: 50Hz
- General Specifications
- Impulse sander suitable for general grinding applications and finishing applications
- Its ergonomic rubber handle makes it a user-friendly tool
- With a vacuum cleaner accessory slot for dust collection
- See the manual HERE
- Included in the Box
- 1 Sanding paper (P80)
Weight and Dimensions
- Weight: 1.7 kg
- Dimensions: 44 x 28 x 34.5 cm
Product Usage Instructions
Safety Precautions
Before using the BORMANN BSS2100 Electric Palm Sander, please read and understand all safety precautions mentioned in the user manual. Some important safety precautions include:
- Wear appropriate personal protective equipment (PPE) such as safety goggles, dust mask, and ear protection.
- Ensure that the power cord is in good condition and not damaged.
- Do not operate the sander in wet or damp conditions.
- Keep the work area clean and free from clutter.
Assembly
Follow these steps to assemble the BORMANN BSS2100 Electric Palm Sander:
- Insert the sanding paper (P80) into the sander’s sanding belt slot.
- Tighten the sanding belt securely.
- If using a vacuum cleaner for dust collection, attach the vacuum cleaner accessory to the slot provided.
Operation
Follow these steps to operate the BORMANN BSS2100 Electric Palm Sander:
- Connect the sander to a power outlet using the provided power cord.
- Hold the sander firmly with both hands, ensuring a comfortable grip on the ergonomic rubber handle.
- Place the sanding surface of the sander against the workpiece.
- Switch on the sander and gradually move it across the workpiece in a back-and-forth motion.
- Apply light to medium pressure, allowing the sander to do the work.
- Continue sanding until the desired result is achieved.
FAQ
How do I change the sanding paper?
To change the sanding paper on the BORMANN BSS2100 Electric Palm Sander,
follow these steps:
- Switch off and unplug the sander.
- Loosen the sanding belt by adjusting the tensioning knob or lever.
- Remove the old sanding paper from the sanding belt slot.
- Insert a new sanding paper into the slot, ensuring it is aligned properly.
- Tighten the sanding belt securely.
Can I use this sander for wet sanding?
No, the BORMANN BSS2100 Electric Palm Sander is not designed for wet sanding.
It should only be used in dry conditions
- SKU: IT61980
- €39.90
Specifications
Technical Specifications
- Power: 180W
- No-load speed: 0-11000 rpm/min
- Use: Ideal for using on vertical surfaces such as doors and walls, for light to
- medium sanding tasks
- Sanding belt size: 90 x 187 mm
- Oscillation diameter: 2 mm
- Power Cord length: 2 m
- Voltage: 230V
- Frequency: 50Hz
General Specifications
- Impulse sander suitable for general grinding applications and finishing applications
- Its ergonomic rubber handle makes it a user-friendly tool
- With a vacuum cleaner accessory slot for dust collection
- See the manual HERE
Included in the Box
- 1 Sanding paper (P80)
Weight and Dimensions
- Weight: 1.7 kg
- Dimensions: 44 x 28 x 34.5 cm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>