JBL Quantum 910 Wireless User Guide

JBL Quantum 910 Wireless

Specifications

• Platform: Windows 10 (64 bit only) / Windows 11
• Software requirements: JBL QuantumENGINE
• Headset compatibility: PC, Xbox, PlayStation, Nintendo Switch, Mobile, MAC
• Connectivity: 3.5 mm Audio Cable, 2.4GHz Wireless, Bluetooth

Product Overview

The JBL Quantum910 Wireless headset is packed with features to enhance your gaming experience. Here’s an overview of the different components and controls:

1. ANC / TALKTHRU LED
2. ANC / TALKTHRU button
3. Game audio-chat balance dial
4. Volume Control
5. Detachable Windshield foam
6. Notification LED for mic mute / unmute
7. Microphone Mute / unMute
8. Charging LED
9. 3.5 mm Audio Jack
10. USB-C port
11. Voice Focus Boom Microphone
12. SPATIAL SOUND / HEAD TRACKING CONTROL
13. Power on / off and Bluetooth pairing slider
14. POWER / 2.4GHz / Bluetooth LED
15. RGB Lighting Zones (optional)
16. Flat-fold ear cup
17. 2.4GHz PAIRING BUTTON
18. Volume Control
19. MIC MUTE BUTTON

Product Usage Instructions

First Time Setup:

1. Connect the headset to your PC via the 2.4GHz USB wireless connection.
2. Go to Sound Settings -> Sound Control Panel.
3. Under Playback, highlight “JBL QUANTUM910 WIRELESS GAME” and select “Set Default” -> “Default Device”.
4. Highlight “JBL QUANTUM910 WIRELESS CHAT” and select “Set Default” -> “Default Communication Device”.

Power On & Connect:

1. To power on the headset, slide the power on/off and Bluetooth pairing slider to the ON position.
2. If you want to connect via 2.4GHz wireless, make sure the USB wireless dongle is connected to your PC or compatible device.
3. If you want to connect via Bluetooth, go to the settings of your device and enable Bluetooth.
4. On your device, search for Bluetooth devices and select “JBL Quantum910” when it appears.
5. Once connected, the LED indicator will show a solid light.

Button Commands:
Here are some button commands you can use with the JBL Quantum910 Wireless headset:

• ANC on/off: Press and hold the ANC/TALKTHRU button for more than 2 seconds.
• TALKTHRU on/off: Press and hold the ANC/TALKTHRU button for more than 2 seconds.
• Increase game volume: Press the Game audio-chat balance dial upward.
• Increase chat volume: Press the Game audio-chat balance dial downward.
• Increase master volume: Rotate the Volume Control dial upward.
• Decrease master volume : Rotate the Volume Control dial downward.
• Microphone Mute / unMute : Press the Microphone Mute / unMute button once to mute/unmute the microphone.
• Bluetooth pairing mode: Press and hold the power on/off and Bluetooth pairing slider for more than 2 seconds.
• Re-centering for head tracking: Press and hold the SPATIAL SOUND / HEAD TRACKING CONTROL button for more than 2 seconds.

FAQ

• What software do I need to download for full access to features?
  You need to download JBL QuantumENGINE software from JBLquantum.com/engine.

• Which platforms are compatible with the JBL Quantum910 Wireless headset?
  The headset is compatible with PC, Xbox, PlayStation, Nintendo Switch, Mobile, and MAC.

• Can I use the headset with a PS4 or PS5?
  Yes, the JBL QuantumSPATIAL 360 feature is available on PlayStation (PS4/PS5).

• How do I connect the headset via Bluetooth?
  Enable Bluetooth on your device and search for Bluetooth devices. Select “JBL Quantum910” when it appears.

• How do I set up the headset for the first time?
  Connect the headset to your PC via the 2.4GHz USB wireless connection and follow the sound settings instructions mentioned above.

JBL QuantumENGINE
Download JBL QuantumENGINE to gain full access to features on your JBL Quantum headsets – from headset calibration to adjusting 3D audio to suit your hearing, from creating customized RGB lighting effects to determining how the boom microphone side-tone works. JBLquantum.com/engine.

Software requirements

• Platform: Windows 10 (64 bit only) / Windows 11
• 500MB of free hard drive space for installation
• *Always use the latest version of Windows 10 (64 bit) or Windows 11 for the most optimal experience on JBL QuantumENGINE
• *JBL QuantumSPHERE 360 and DTS Headphone:X V2.0 available on Windows only. Software installation required.
• JBL QuantumSPATIAL 360
• Available on PlayStation (PS4/PS5) and Nintendo Switch

WHAT’S IN THE BOX

Requirements

JBL QuantumENGINE SOFTWARE REQUIREMENTS
Platform: Windows 10 (64 bit only) / Windows 11 500MB OF FREE HARD DRIVE SPACE FOR INSTALLATION

System compatibility
PC | Xbox™ | PlayStation™ | Nintendo Switch™ | Mobile | MAC

OVERVIEW

1. ANC / TALKTHRU LED
2. ANC / TALKTHRU button
3. Game audio-chat balance dial
4. Volume Control
5. Detachable Windshield foam
6. Notification LED for mic mute / unmute
7. Microphone Mute / unMute
8. CHARGING LED
9. 3.5 mm Audio Jack
10.  USB-C port
11.  Voice Focus Boom Microphone
12. SPATIAL SOUND / HEAD TRACKING CONTROL
13. Power on / off and Bluetooth pairing slider
14.  POWER / 2.4GH z / Bluetooth LED
15.  RGB Lighting Zones
16.  Flat-fold ear cup
17.  2.4GHz PAIRING BUTTON
18. Volume Control
19.  MIC MUTE BUTTON

Calibration microphone

POWER ON & CONNECT

Bluetooth

SETUP

BUTTON COMMAND

First time setup

• Connect the headset to your PC via 2.4GHz USB wireless connection.
• Go to “Sound Settings” -> “Sound Control Panel”.
• Under “Playback” highlight “JBL QUANTUM910 WIRELESS GAME” and select “Set Default” -> “Default Device”.
• Highlight “JBL QUANTUM910 WIRELESS CHAT” and select “Set Default” -> “Default Communication Device”.
• Under “Recording” highlight “JBL QUANTUM910 WIRELESS CHAT” and select “Set Default” -> “Default Device”.
• In your chat application select “JBL QUANTUM910 WIRELESS CHAT” as the default audio device.
• Follow the onscreen instructions to personalize your sound settings.

*If you have not installed JBL QuantumEngine, ensure to complete this step before enabling JBL QuantumSPATIAL 360.

MICROPHONE

CHARGING

LED BEHAVIOURS

TECH SPEC

• Model: QUANTUM910WIRELESS
• Driver size: 50 mm Dynamic drivers
• Frequency response (Passive): 20 Hz – 40 kHz
• Frequency response (Active): 20 Hz – 20 kHz
• Microphone frequency response: 100 Hz – 8 kHz
• Max input power: 30 mW
• Sensitivity: 111 dB SPL / 1 mW
• Maximum SPL: 93 dB
• Microphone sensitivity: -38 dBV / Pa @1 kHz
• Impedance: 32 ohm
• 2.4GHz Wireless transmitter power: <13 dBm
• 2.4GHz Wireless modulation: GFSK, π/4 DQPSK
• 2.4GHz Wireless carrier frequency: 2400 MHz – 2483.5 MHz
• Bluetooth transmitted power: <13 dBm
• Bluetooth transmitted modulation: GFSK, π/4 DQPSK
• Bluetooth frequency: 2400 MHz – 2483.5 MHz
• Bluetooth profile version: A2DP v1.3, HFP v1.8
• Bluetooth version: BT Core v5.2
• Battery type: Li-ion battery (3.7 V / 1300 mAh)
• Power supply: 5 V 2 A
• Charging time: 3.5 hrs
• Music play time with BT+2.4GHz on and ANC+RGB lighting off: 34 hrs
• Talk time with BT+2.4GHz on and ANC+RGB lighting off : 38 hrs
• Music play time with only 2.4GHz on and ANC+RGB lighting off: 39 hrs
• Talk time with only 2.4GHz on and ANC+RGB lighting off: 44 hrs
• Music play time with only BT on and ANC+RGB lighting off: 45 hrs
• Talk time with only BT on and ANC+RGB lighting off: 47 hrs
• Microphone pickup pattern: Unidirectional
• Weight: 420 g

Connectivity

IC RF Exposure Information and Statement

• The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLQ910WL) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.106 W/Kg.
• The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC
• RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user›s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.

IC RF Exposure Information and Statement for USB Wireless Dongle
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLQ910WLTM) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.548 W/kg.

Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user›s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
IC: 6132A-JBLQ910WL

Body operation
The device was tested for typical bodily operations where the product was kept with 5 mm distance attaching away from the body. Noncompliance with the above restrictions may result in violation of IC RF exposure guidelines. Use only the supplied or approved antenna.
IC: 6132A-JBLQ910WLTM

BLUETOOTH

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

References

• JBL Quantum Support
• Anatel — Agência Nacional de Telecomunicações
• jbl.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>