BLACKFIRE BBM6414 Rechargeable 2 Color LED Headlamp Instructions

June 4, 2024
BLACKFIRE

BLACKFIRE logo BBM6414 Rechargeable 2 Color LED Headlamp
Instructions
BLACKFIRE BBM6414 Rechargeable 2 Color LED Headlamp

BBM6414 Rechargeable 2 Color LED Headlamp

FIG. A
FRONT

BLACKFIRE BBM6414 Rechargeable 2 Color LED Headlamp - Fig
1| BLACKFIRE BBM6414
Rechargeable 2 Color LED Headlamp - Fig 2| BLACKFIRE BBM6414 Rechargeable 2 Color LED Headlamp - Fig
3
---|---|---

FIG. B
BACK
FIG. C
MARKER AND PENCIL HOLDER
BLACKFIRE BBM6414 Rechargeable 2 Color LED Headlamp - Fig
5

**OPERATING INSTRUCTIONS

**

CHARGING BATTERY
Fully charge the headlamp before use. The first-time charge should be at least 6 hours. Connect the USB-C cable connection to the headlamp, and plug the other end of the cable into a USB port (2.0 or higher), or AC adapter (not included). USB adapter/power supply should not exceed the specified charging voltage and current (Max. 5.0V DC, min. 0.5A). Normal charging time is approximately 5 hours.
BATTERY LEVEL INDICATOR:
Press and hold the power button 1 to check the battery level (do not hold down for more than 5 seconds):

  • Four lights on the (red, yellow, green, and green), unit have 75% to 99% battery charge
  • Three lights on the (red, yellow, green), unit have 50% to 74% battery charge
  • Two lights on the (red, and yellow), unit have a 25% to 49% battery charge
  • One light on the (red), the unit has a 15% to 24% battery charge
  • Flashing (red) battery indicator, less than 15% battery charge
  • Spot or Flood light flashes 5 times, and less than 15% of the battery charge remains.
  • No LED lights and the battery is fully discharged. Must leave the unit plugged in to charge for a minimum of 6 hours. If the unit is fully discharged, the battery indicator may not light up immediately when the charging adapter is inserted.

ON/OFF:

  • To activate the headlamp, press and release the power button. The unit will be in HIGH spotlight mode.
  • Hold down the power button to change between modes.
  • Once the desired mode is on, clicking the power button will reduce the brightness. This headlamp has a white LED spotlight, white LED area light, and red LEDs.
  • NOTE: If the light is on for more than 5 seconds in ANY mode, the next press of the power button will shut it off. This saves time by clicking through modes to power down.
  • NOTE: The light will turn on in the same mode last used when turned off.

REMOVAL AND REINSERTION OF THE HEADLAMP ONTO THE BRACKET:
The headlamp can be removed for charging:

  • Pull lever 9 above the headlamp toward the power button and lift the headlamp from the bracket
  • To reinsert the headlamp, align the slot on the back of the headlamp with the slot on the bracket and push the headlamp down until it clicks in place

FABRIC STRAP:
The fabric strap is designed to fit directly on the head.
Silicone is weaved into the fabric strap to make it securely stay on the head. The strap is adjustable for larger and smaller diameters.
MARKER AND PENCIL HOLDER:
The marker/pencil holder is attached to the strap. If desired, it can be removed from the strap. It is designed to hold one standard permanent marker and one standard carpenter’s pencil. The marker can be snapped/slid into the semi-circular section from the side. The carpenter’s pencil can be snapped/slid into the second opening on top 13.

CONTENTS

  • BBM6414 Headlamp
  • Headlamp bracket with adjustable fabric strap and marker/pencil holder.
  • 20″ (500 mm) USB-C Cable
  • Instruction Sheet

GENERAL SPECIFICATIONS

  • Dimensions: 2.25″ x 3.125″ x 1.375″ (57.2 mm x 79.4 mm x 34.9 mm)
  • Weight (headlamp only): 2.96 oz. (84 g)
  • Battery Type: Internal, Lithium polymer, 3.7V / 2000mAh (7.4Wh)
  • Charging Requirements: Maximum 5V DC, Minimum 0.5A
  • Certifications: CE, UKCA, RoHS, REACH, DOE/CEC, NRCan
  • Operating/Charging Temperature: 32° to 104°F (0° to 40°C)
  • Storage Temperature: -22° to 140°F (-30° to 60°C)
  • Drop Protection: 10 ft. (3 m)
  • Ingress Protection (IP) Rating: IP67
    Specifications are subject to change.

WARNINGS
Read, understand, and follow these instructions to ensure safe operation. Failure to observe these warnings can result in a risk of fire or electric shock.

  • Keep these instructions for future reference.
  • No user-serviceable parts inside. Do not open the enclosure or attempt to repair this headlamp.
  • Never lubricate any part of this headlamp.
  • DO NOT expose to direct sunlight, open flame, heat sources, equipment that produces heat, or extremes in environmental temperature.
  • Never immerse in water or other liquids. Avoid spilling liquids or falling foreign objects into openings on the headlamp enclosure.
  • The water-resistant cover must be properly sealed to achieve specified water & foreign object ingress protection. Keep the seal free of dirt, oil, sand, or other material that interferes with proper sealing. Failure to do so can result in a risk of fire or electric shock.
  • DO NOT open the water-resistant cover if wet or in a wet environment. Dry the headlamp thoroughly and seal around the water-resistant cover completely before opening the water-resistant cover.
  • When the headlamp is in use or charging, make sure there is adequate space to allow ventilation of internally generated heat.
  • Use a safety-rated power supply or wall adapter. Never use a power supply or wall adapter that exceeds the specified charging voltage and current.
  • Route the power supply cable so that it will not be stepped on or pinched by other objects.

FEATURE DETAILS (FIG. A)

  1. Power Button
  2. Battery Level Indicator
  3. 5-LED Light
  4. Charging Port Cover
  5. USB-C Charging Port
  6. Removal Lever
  7. USB-C Charging Cable
  8. Fabric Strap
  9. Strap Adjustment
  10. Marker & Pencil Holder
  11. Bracket
  12. Magnet

Warning or Caution
Risk of Electrical Shock
Read Instructions
Direct Current (DC)
Conformité Européenne. Conforms with European Economic Area Directives
Conforms with United Kingdom Conformity Assessment Requirements
WEEE – Electronics Disposal

MAINTENANCE

CLEANING: Be sure the headlamp is turned off and wipe with a clean, dry lint-free cloth. Do not use abrasive cleaners or solvents.
STORAGE: If the headlamp is to be left unused for an extended period of time, charge to approximately 70% (red, yellow, and green) before storing, and recharge periodically during storage to maintain the battery’s charging capacity.

WARRANTY

www.blackfire.com/warranty

DISPOSAL / RECYCLE

Do not place equipment and its accessories in the trash.
Items must be properly disposed of in accordance with local regulations. Please see www.epa.gov/recycle for additional information.

OPERATING INSTRUCTIONS

PLEASE SEE THE REVERSE SIDE.

CUSTOMER SERVICE

Blackfire, INC.
661 E Main St Unit 200-117, Midlothian, Texas 76065
1-877-572-4184
customerservice@blackfire.com
www.blackfire.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals