BLACKFIRE BBM9113 Bluetooth Speaker with Magnetic Strap Instructions

: June 4, 2024
: BLACKFIRE

Table of Contents

CONTENTS
GENERAL SPECIFICATIONS
SYMBOLS ON PRODUCT
FEATURE DETAILS (FIG.A)
OPERATING INSTRUCTIONS
- CHARGING BATTERY
COMPLIANCE
MAINTENANCE
DISPOSAL / RECYCLE
CUSTOMER SERVICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BLACKFIRE BBM9113 Bluetooth Speaker with Magnetic Strap

Blackfire BBM9113 is a powered speaker designed to provide high-quality sound for smart phones, tablets, computers, or other audio devices.

GENERAL SPECIFICATIONS

Dimensions: 4.22″ x 4.11″ x 1.59″ (107.2 x 104.4 x 40.4 mm)
Weight: 9.5 oz. (269.3 g)
Wireless Compatibility: Devices with Bluetooth® Version 5.0
Wireless Connection Range: 32.8 ft. (10 m) in open space
Support Profiles: A2DP, AVRCP, GAVDP, HFP
Output Power: 3W (5W maximum)
Battery Type: Internal, Li-Ion, 2150mAh (7.85Wh)
Battery Life: Approx. 10 to 13 hours at 70% volume
Charging Requirements: Maximum 5V DC, Minimum 0.45A
Certifications: FCC, IC, DOE/CEC, NRCAN
Operating/Charging Temperature: 32° to 104°F (0° to 40°C)
Storage Temperature: – 22° to 140°F (-30° to 60°C)
Relative Humidity: <85% non-condensing
Drop Protection: 9.8′ (3 m)
Ingress Protection (IP) Rating: IP54

Specifications subject to change

WARNINGS

Read, understand, and follow these instructions to ensure safe operation.
Failure to observe these warnings can result in risk of fire or electric shock.
Keep these instructions for future reference.

No user-serviceable parts inside. Do not open enclosure or attempt to repair this speaker.
Never lubricate any part of this speaker.
Do not expose to direct sunlight, open flame, heat sources, equipment that produces heat, or extremes in environmental temperature.
Never immerse in water or other liquids. Avoid spilling liquids or falling foreign objects into openings or vents on the speaker enclosure.
Water-resistant cover must be properly sealed to achieve specified water & foreign object ingress protection. Keep seal free of dirt, oil, sand, or other material that interferes with proper sealing. Failure to do so can result in risk of fire or electric shock.
Do not open water-resistant cover if wet or in a wet environment. Dry the speaker thoroughly and the seal around water-resistant cover completely before opening water-resistant cover.
When speaker is in use or charging, make sure there is adequate space to allow ventilation of internally generated heat.
Use safety-rated power supply or wall adapter. Never use power supply or wall adapter that exceeds the specified charging voltage and current.
Route the power supply cable so that it will not be stepped on or pinched by other objects.

SYMBOLS ON PRODUCT

| Warning or Caution
---|---
| Risk of Electrical Shock
| Read Instructions
| FCC. Conforms with particular Code of Federal regulations.
| Meets CEC and DOE energy efficiency requirements.
| WEEE – Electronic Waste Disposal
| Recycle
| Energy Efficiency Verified

FEATURE DETAILS (FIG.A)

① Power button
② “-” Volume down/skip backward button
③ Play/Pause/Talk button
④ “+” Volume up/skip forward button
⑤ Auxiliary “Aux In” jack

⑥ USB charging port
⑦ Water-resistant cover
⑧ LED indicator
⑨ Microphone
⑩ Strap

⑪ Nail hole
⑫ Magnet
⑬ Snap L-hook

⑭ L-hook slot

OPERATING INSTRUCTIONS

CHARGING BATTERY

NOTE: Fully charge before use. First-time charge should be at least 4 hours. Connect the USB Type C cable connection to USB charging port 6 ; plug the other end of cable to computer or USB AC adapter or other USB power supply (not included). USB adapter/power supply should not exceed the specified charging voltage and current (Max. 5V DC, min. 0.45A). Normal charging time is 4 to 6 hours.

LED Indicator Color	Status
Solid Red	Battery charging (LED off when fully charged)
Flashing Red	Low battery
Solid Blue	Active Bluetooth® wireless connection
Slow-Flashing Blue	Attempting to pair with wireless device
Quick-Flashing Blue	Attempting to auto-link to paired wireless device
Solid Green	Aux line-in connection (overrides wireless connection)
No LED	Unit is off, battery is dead, or battery has finished charging

ON/OFF: Press & hold power button ① for 3 seconds, a tone will sound. Unit will automatically power off after 10 minutes of inactivity.
NOTE: Turn unit off when not in use to prolong battery life.
PAIRING: Wireless connection activates automatically and is ready to pair when unit is turned on. On your Bluetooth® wireless compatible device, enable Bluetooth® and search/scan for devices that can be paired. Select “BBM9113” when it appears (refer tothe user manual of your device). If necessary, enter “0000” as pairing passcode. A tone sounds after a successful pairing.
NOTE: Unit automatically attempts to connect the last paired wireless device device but is ready to pair with any compatible device if the last paired device is not detected within 5 seconds of powering on.
DISCONNECT PAIRING: 1 ) Turn unit off; -or- 2 ) Double-press Power Button ① (tone sounds); -or- 3 ) Plug a cable into Aux jack ⑤ ; -or- 4 ) turn off Bluetooth® wireless connection in paired device.

RESET WIRELESS CONNECTION OR PAIRING WITH DIFFERENT DEVICES:
Double-press Power Button ① (tone sounds). Repeat Pairing procedure with different devices.
PLAYING AUDIO: Use your device to control the speaker or use the built-in control buttons on the speaker.

Press Play/Pause/Talk button ③ to play or pause audio on your device.
Short-press the “-” ② or “+” ④ button to adjust the speaker volume. A tone will sound when maximum volume is reached. Volume may also be controlled from your audio device.
Long press the“-” ② or “+” ④ button to skip backward or forward (respectively) during a song.

AUXILIARY AUDIO-IN: Connect one end of the auxiliary cable to the AUX jack 5 of the speaker; plug the other end of cable to line-out or headphone jack
of your device.

SPEAKERPHONE OPERATION:

When an incoming call occurs, playing music is muted & ring tone sounds.
Short-press Play/Pause/Talk ③ button to answer the call, or long-press to ignore.
To disconnect the call, short press the Play/Pause/Talk button ③ to hang up.
To redial last call, long press Play/Pause/Talk button ③ when speaker is playing music.

LOW BATTERY INDICATION: A continuous double-beep tone will sound when battery level drops to approximately 10%. Speaker will automatically power off when the battery level is below 3%. Recharge speaker as soon as possible.

POSITIONING SPEAKER:

Make sure that front of speaker is not obstructed.
Stand speaker upright on a flat, level, stable surface.
Attach speaker to a metal surface via the magnet on the back of the unit ⑫.
DO NOT mount to electrical equipment.
Hang from a nail or like item by opening the strap and placing the nail hole over the head of the nail.
Strap to any backpack, belt, 1/2” conduit or smaller round surface by looping the strap around and snapping the L-hook into the slot

COMPLIANCE

FCC & IC COMPLIANCE

This device complies with part 15 of the FCC RULES and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

FCC RF EXPOSURE STATEMENTS:
This transmitter must not be co‐located or operated in conjunction with any other antenna or transmitter.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 5mm between the radiator and your body or nearby persons.

IC NOTICE TO CANADIAN USERS
This device complies with industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation of the device.

This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. This Class B digital apparatus complies with Canadian ICES-003.

IC RADIATION EXPOSURE STATEMENT:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 5 mm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

MAINTENANCE

CLEANING: Be sure speaker is turned off and wipe with a clean, dry lint- free cloth. Do not use abrasive cleaners or solvents.

STORAGE: If the speaker is to be left unused for an extended period of time, charge before storing, and recharge periodically during storage, to maintain battery’s charging capacity.

DISPOSAL / RECYCLE

Do not place equipment and its accessories in the trash. Items
must be properly disposed of in accordance with local regulations.
Please see www.epa.gov/recycle for additional information

| Do not place equipment and its accessories in the trash. Items must be properly disposed of in accordance with local regulations.
Please see www.epa.gov/recycle for additional information.
---|---

CUSTOMER SERVICE

BLACKFIRE, INC.
661 E Main St Unit 200-117, Midlothian, Texas 76065
1-877-572-4184
customerservice@Blackfire.com
www.Blackfire.com

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Blackfire, Inc. is under license.