BLACKFIRE FSP60W Portable Solar Panel Instruction Manual

: June 4, 2024
: BLACKFIRE

Table of Contents

CONTENTS
GENERAL SPECIFICATIONS
WARNINGS
MAINTENANCE
FEATURE DETAILS
CONTROL PANEL FEATURES
SYMBOLS ON PRODUCT
OPERATING INSTRUCTIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BLACKFIRE FSP60W Portable Solar Panel

GENERAL SPECIFICATIONS

Solar Cell Type: Monocrystalline
APP® Maximum Output: 60W (120W max when chained with another panel)
APP® Voltage at Maximum Power: 18V
APP® Amperage at Maximum Power: 3.34A
APP® Open Circuit Voltage: 22V
USB Output: 5V/3.0A (15W)
Operating / Storage Altitude: 6562 ft. (2000 m)
Operating / Storage Maximum Humidity: <75% non-condensing
Operating / Storage Temperature: 14° to 122°F (-10° to 50°C)
Dimensions: 36.5″ x 20.5″ x 2″ (929 x 522 x 50.8 mm)
Weight: 5.7lbs (2.6 kg)
Conformance: CE, UKCA, REACH, ROHS

Specifications subject to change.

WARNINGS

Read, understand, and follow these instructions to ensure safe operation. Failure to observe these warnings can result in risk of fire, electric shock, serious injury, and/or property damage.

DO NOT use the product if it is damaged or modified. Damaged or modified equipment may exhibit unpredictable behavior resulting in fire or risk of injury.
DO NOT subject to impacts or drops. The housing may not show signs of damage, but internal components may have been compromised. It is advisable to replace the unit if any such severe events occur.
DO NOT expose to open flame, heat sources, equipment that produces heat, or extremes in environmental temperature.
DO NOT attempt to repair the solar panel. There are no user-serviceable parts.
DO NOT immerse in water or other liquids. Avoid spilling liquids into any ports or openings on the device.
DO NOT let solid foreign objects, such as dirt or job site debris, get into any ports or openings on the device.
DO NOT route power cables through areas where they can be stepped on or pinched by other objects.
DO NOT attempt to insert other USB connector types into USB-A port. NOT intended for use with plug types or adapters not listed on the product label.
STOP use immediately if any wires become loose or electronic components are exposed.

MAINTENANCE

CLEANING: Be sure the solar panel is disconnected from all power sources and devices. Use a clean, dry, soft, lint-free cloth to wipe down the solar panel surface. Do not use abrasive cleaners or solvents. If necessary, dampen a clean cloth with a mix of mild soap and water to clean the solar panel surface.

FEATURE DETAILS

① Mounting hole
② Kickstand(s)
③ Adjustable Shoulder Strap
④ Pocket

CONTROL PANEL FEATURES

⑤ Input port (APP ®) to chain an additional solar panel
⑥ Anderson Power Pole ® (APP ®) to 8mm DC adapter
⑦ Solar Panel Output (APP ®)
⑧ Power output indicator
⑨ 5V Regulated output (USB-A)

SYMBOLS ON PRODUCT

Warning Caution Symbol
Read instructions
CE – Conforms with European Economic Area Directives
Conforms with United Kingdom
Conformity Assessment Requirements

OPERATING INSTRUCTIONS

HOW TO USE:
Unfold the panel and align to the sun. Ensure that no part of the panel is in the shade. Connect the output cable (APP®/DC) to the charging port of the portable battery and begin charging. If using a Blackfire FSP60W series portable battery with only an 8mm round port charging input, use the supplied APP® to 8mm adapter (P/N P000205) to connect the panel and begin charging.

USB Charging
The solar panel has the capability to supply regulated 5V output through the USB-A port. Connect your device that charges via USB-A (5V) to the USB-A Port.

Solar Panel Placement
Place the solar panel flat on the ground, or utilizing the kickstand(s) on the reverse side, raise the panel to point toward the sun for improved solar charging capability.

The power output module has three power output indicators ⑧ that may be used to help position the panel to deliver optimal power. The panels are in an optimal position when the three indicators are illuminated. It is only possible to illuminate all three indicators when the device is connected to a load capable of drawing more than 25W of continuous power.

NOTE – Regardless of panel positioning, if a load draws less than 10W (including no load), only one indicator will illuminate. If a load draws from 11W-25W of continuous power, only two indicators will illuminate.

CHAINING
Connecting an additional P/N FSP60W 60W panel is allowable using the input port (APP®) connector. The input connector is unregulated, allowing a direct pass-through of power from the additional solar panel to the output port.

NOTE – When connecting additional panels, please consider the limitations of the device charging via the APP®connector.

WARRANTY
www.blackfire.com/warranty

DISPOSAL / RECYCLE
Do not place equipment and its accessories in the trash. Items must be properly disposed of in accordance with local regulations. Please see www.epa.gov/recycle for additional information.

CUSTOMER SERVICE

Blackfire, INC.
500 Klein Tools Boulevard
Mansfield, TX 76063
1-877-572-4184
customerservice@blackfire.com
www.blackfire.com
APP is a registered trademark of Anderson Power Products, Inc.