stack on SS-22-MB-E Steel Security 16 Gun Safe Biometric Lock Instructions

stack on SS-22-MB-E Steel Security 16 Gun Safe Biometric Lock

IMPORTANT

• Record the serial number from the tag on the back of the safe or from the tag on the front bottom corner of the safe.
• Keep keys in a secure place away from children.
• Do not store the backup key, or this document in the safe.
• Do not move this safe using its handle. The handle should only be used for opening and closing the door of the safe.
• Warning: Keep your safe closed and locked at all times when not in use. Children could accidentally be locked inside the safe.

BATTERY INSTALLATION

Doing this could cause the power supply to become disconnected from the lock. the keypad, a red light will come on warning you the tab and turning the cover as shown in the cover back in place.

ELECTRONIC LOCK
on the electronic keypad in this order: 1 – 5 – 9 – #.
NOTE: You should change the entry code as soon as security. need to turn the handle clockwise to open the door. You will have 5 seconds to turn the handle before the locking mechanism is reactivated.

ENTERING YOUR SECURITY CODE

To enter your own security code you will need to follow the steps listed below:
factory code of 1 – 5 – 9 – #) locate the small red activated and will stay on for a period of time that should allow you to enter your code. You can only enter your code while the yellow light is on. With the door open and the yellow light on, enter your own personal security code, which can be 3 – 8 the ” ” symbol on the electronic touchpad. Before you close the door, try the new security code to make sure the lock releases the handle so you can turn it and retract the live-action bolts. DO NOT SHUT THE DOOR UNTIL YOU HAVE CONFIRMED THAT YOUR NEW SECURITY CODE HAS BEEN ENTERED CORRECTLY. If the code fails, go through steps 1 and 2 again. If the code works successfully record your combination number on the front of this form or store your combination on our secure website at www.stack-on.com under Customer Service. If you write down your combination you must keep this information in a secure place, away from children, the safe. When you open the safe in the future enter the security code you have set followed by the ” # ” symbol. If the incorrect security code is entered 3 times you will have an automatic lockout for 20 seconds before you can try your code again. If the incorrect security code is entered 3 additional times there will be a 5-minute lockout before the code can be tried again.

LOCKING THE SAFE

To lock the safe, close the door and rotate the handle counterclockwise until it stops. If the handle is not turned until it stops, the locking mechanism will not lock.
NOTE ON LOCKING THE SAFE: Because the locking mechanism is deactivated after the combination is entered, wait a minimum of 6 seconds from the time the combination is entered to lock the safe.

TURNING THE KEYPAD SOUND OFF/ON
You can turn off the “beep” sound of the keypad by entering code 6 3 3. To turn the “beep” sound on, enter code 6 6.

SELECTING A LOCATION

‘Ihe safe must be mounted to the floor. For optimal safety and security, the safe should be installed adjacent to a side wall with minimal space on either side of the safe, in an isolated, dry and secure area.

SECURING THE SAFE

NOTE: ‘Ihe safe must be secured to the floor. Use the hardware provided or consult your hardware retailer for fastening hardware for your particular mounting surface.
NOTE: this safe must be mounted to the floor Failure to do so will compromise the safety and security of the safe. Mark the holes to be used. Drill the appropriate diameter and depth of pilot holes depending on the type of hardware being used and the type of mounting surface. Secure the safe with the fasteners.

BACK UP KEY

A “Back Up Key” has been provided in case you have forgotten or lost your security code. To open the safe using the backup key follow the steps below:

1.  Remove the cover by pressing the tab and turning the cover as shown in the illustration. The lock can hang by the connecting cable while unlocking the safe.
2.  Insert the key in the keyhole and turn clockwise 1/4 turn (until stopped) in order to unlock the safe. Rotate the handle and open the door.
3.  Keep the door open until you have entered a new security code. Before entering your new code, remove the key and screw the cover back in place.
4.  Enter your new security code following the instructions for entering your security code.

INSTALLATION OF SCOPE STAND-OFF

NOTE: The scope stand-off will function properly or many combinations of guns with scopes Screw the scope stand-off into the pilot hole of the barrel rest.

SHELVES

For selected models with adjustable shelving, the shelving can be installed by locating the shelf clips to the desired locations and setting the shelf in place. For selected models with the door organizer, the top tray of the door organizer can be adjusted by removing the two screws and relocating the tray.

IMPORTANT
Keep keys and combination numbers in a secure place, away from children. Keep this record of your serial number and combination in a secure place separate from your safe.

References

• On.com
• STACK-ON – Stack-On Products – Safes, Gun Safes, Gun Security…
• STACK-ON – Stack-On Products – Safes, Gun Safes, Gun Security…
• STACK-ON – Stack-On Products – Safes, Gun Safes, Gun Security…
• Customer Service – STACK-ON

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>