Stack on SS-22-MG-C Steel Security 16 Gun Safe Biometric Lock Instructions

: June 5, 2024
: STACK-ON

Table of Contents

Stack on SS-22-MG-C Steel Security 16 Gun Safe Biometric Lock
IMPORTANT
SAFE COMBINATION INSTRUCTIONS
SELECTING A LOCATION
SECURING THE SAFE
INSTALLATION OF SCOPE STAND-OFF
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Stack on SS-22-MG-C Steel Security 16 Gun Safe Biometric Lock

IMPORTANT

Record the serial number from the tag on the back of the safe or from the tag on the front bottom corner of the safe. Keep this record of your combination in a secure place away from children. Do not store this document in the safe. Do not move this safe using its handle. The handle should only be used for opening and closing the door of the safe. Warning: Keep your safe closed and locked at all times when not in use. Children could accidentally be locked inside the safe. Do not store electronic media, computer disks, audio-visual media, or photographic negatives in this safe. This material will not survive the rated internal temperature of the safe. This material may be damaged or destroyed.

SAFE COMBINATION INSTRUCTIONS

All numbers must be dialed exactly. If you pass a number, you can not back up. You must start over. All numbers are to be dialed to the “Top Notch located on top of the dial ring (the 12 o’clock position).

Turn the Dial clockwise passing the first combination number twice landing on the number the third time.
Now turn the Dial counterclockwise, passing the second combination number once landing on the number on the next time around.
Turn the dial clockwise until you reach the third combination number.
The handle should now be released. Turn the handle clockwise. Pull the door towards you.

HOW TO LOCK

Close the door.
Turn the handle to the locked position.
Turn the dial in either direction for a few rounds

SELECTING A LOCATION

The safe must be mounted to the floor. For optimal safety and security, the safe should be installed adjacent to a side wall with minimal space on either side of the safe, in an isolated, dry and secure area. The safe should be flat against the wall and floor. Remove the baseboard if necessary

SECURING THE SAFE

NOTE: The safe must be secured to the floor. Use the hardware provided or consult your hardware retailer for fastening hardware for your particular mounting surface.
NOTE: This safe must be mounted to the floor. Failure to do so will compromise the safety and security of the safe. Mark the holes to be used. Drill the appropriate diameter and depth of pilot holes depending on the type of hardware being used and the type of mounting surface. Secure the safe with the fasteners

INSTALLATION OF SCOPE STAND-OFF

NOTE: The scope stand-off will function properly for many combinations of guns with scopes. Screw the scope stand-off into the pilot hole of the barrel rest.

SHELVES

For selected models with adjustable shelving, the shelving can be installed by locating the shelf clips to the desired locations and setting the shelf in place. For selected models with the door organizer, The top tray of the door organizer can be adjusted by removing the two screws and relocating the tray.