stack on E-48-MG-C-S Steel Security 16 Gun Safe Biometric Lock Instructions
- June 5, 2024
- STACK-ON
Table of Contents
- stack on E-48-MG-C-S Steel Security 16 Gun Safe Biometric Lock
- IMPORTANT
- HANDLE ASSEMBLY (Select Models only)
- SAFE COMBINATION INSTRUCTIONS
- SELECTING A LOCATION
- SECURING THE SAFE
- INSTALLATION OF SCOPE STAND-OFF (Select Models only)
- DOOR ORGANIZER ACCESsORIES
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
stack on E-48-MG-C-S Steel Security 16 Gun Safe Biometric Lock
IMPORTANT
Record the serial number from the tag on the back of the safe or from the tag on the front bottom corner of the safe. Keep this record of your combination ina secure place away from children. Do not store this document in the safe. .Do not move this safe using its handle. The handle should only be used for opening and closing the door of the safe. Warning: Keep your safe closed and locked at all times when not in use. Children could accidentally be locked inside the safe. Do not store electronic media, computer disks, audio-visual media or photographic negatives in this safe. This material will not survive the rated internal temperature of the safe. This material may be damaged or destroyed.
HANDLE ASSEMBLY (Select Models only)
Screw the 3 handle spokes into the hub and hand tighten. These spokes are
located in the front foam packaging
NOTE: Do not use this handle to move the safe.
SAFE COMBINATION INSTRUCTIONS
All numbers must be dialed exactly. If you pass a number, you can not back up. You must start over. All numbers are to be dialed to the Top Notch located on top of the dial ring (the 12 o’clock position).
- Turn the Dial clockwise passing the first combination number twice landing on the number the third time.
- Now turn the Dial counterclockwise, passing the second combination number once landing on the number on the next time around.
- Turn the Dial clockwise until you reach the third combination number.
- the handle should now be released. Turn the handle clockwise. Pull the door towards you
HOW TO LOCK
- Close the door.
- Turn the handle to the locked position.
- Turn the dial in either direction a few rounds.
SELECTING A LOCATION
the safe must be mounted to the floor. For optimal safety and security, the safe should be installed adjacent to a side wall with minimal space on either side of the safe, in an isolated, dry and secure area. the safe should be against the wall and floor. Remove the baseboard if necessary.
SECURING THE SAFE
NOTE: the safe must be secured to the floor. Use the hardware provided or
consult your hardware retailer for fastening hardware for your particular
mounting surface.
NOTE: this safe must be mounted to the floor. Failure to do so will
compromise the safety and security of the safe.
To secure your safe to the floor it will first be necessary to drill pilot
holes through the are insulation in the floor of the safe. First place the
safe in the desired location. Lion the bottom carpeting up to and the two-hole
locations marked on the floor insulation. Drill holes through the insulation
using the same diameter drill as the diameter of the mounting hardware you are
using.
IMPORTANT: the fasteners you use must completely All the holes you
drilled into the insulation. (Figure 1) You must use the fasteners afer you
drill the holes. Failure to do so will void the fire rating
Use these holes to fasten the safe to the floor. Drill the appropriate diameter and depth of pilot holes into the floor depending on the type of hardware being used and the type of floor surface. (Figure 2) Secure the safe with the fasteners and replace the carpeting.
INSTALLATION OF SCOPE STAND-OFF (Select Models only)
NOTE: The scope stand-off will function properly tor many combinations of guns with scopes. Screw the scope stand-off into the pilot hole of the barrel rest.
SHELVES (Select Models only)
The shelving can be installed by locating the shelf clips to the desired
locations and setting the shelf in place,
DOOR ORGANIZER ACCESsORIES
(Select Models only) Your door organizer provides a variety of storage options
for your supplies.
Note: Securely attach the pistol holsters to the back panel before you
holster your pistol. Make sure the door accessories do not interfere with
items in the safe or when closing the safe door
IMPORTANT
Keep your combination number in a secure place, away from children. Keep this
record of your serial number and combination number in a secure place separate
from your safe. If you forget or lose the combination number you will need the
serial number as a reference for obtaining a copy of your combination number.
References
- On.com
- STACK-ON – Stack-On Products – Safes, Gun Safes, Gun Security…
- STACK-ON – Stack-On Products – Safes, Gun Safes, Gun Security…
- STACK-ON – Stack-On Products – Safes, Gun Safes, Gun Security…
- Customer Service – STACK-ON
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>