ZUMTOBEL E14487 Panos Inf R100l Installation Guide
- June 16, 2024
- ZUMTOBEL
Table of Contents
ZUMTOBEL E14487 Panos Inf R100l
Product Information
Specifications
- Product Name: PANOS INF R100 LDO ACC
- Typ-Nr: E14487
- Manufacturer: Thorn Lighting Limited
- Address: Durhamgate Spennymoor Co. Durham DL16 6HL UK
- Distributor: Zumtobel Lighting GmbH
- Address: Schweizerstrasse 30 6850 Dornbirn AUSTRIA
- IP Rating: IP20 (for indoor use), IP44 (when installed in an enclosed ceiling)
- Power Supply: 220-240V, 50/60Hz
- LED Type: ..W LED…(…mA)
- Maximum Power Consumption: 149W
- Maximum Current: 500mA
- Maximum Temperature: 140+T
Product Usage Instructions
Mounting
To mount the PANOS INF R100 LDO ACC, follow these steps:
- Ensure that the installation is carried out by authorized specialists.
- If the ceiling material is thin or soft, it is recommended to use ceiling reinforcing rings to enlarge the bearing surface.
- Ensure that the luminaire is not covered with thermally insulating material.
Installation
The installation process of the PANOS INF R100 LDO ACC involves the
following:
- Make sure that the luminaires and power supply units are always disconnected from the mains supply during wiring and installation work.
- Follow the national installation regulations for proper installation.
- Only use the PANOS INF R100 LDO ACC in combination with the PANOS INF luminaire.
WHAT’S IN THE BOX
SPECIFICATIONS
DIMENSIONS
Safety instructions
- Installation and commissioning may only be carried out by authorized specialists.
- The luminaire is used exclusively for lighting and is to be installed in accordance with the national installation regulations. Any other use or installation is regarded as “not according to instructions”.
- The luminaire is protection type IP 44, only when being installed in an enclosed ceiling! Protection type IP 44 does not apply in the ceiling void itself.
- Only use with PANOS INF luminaire.
- Caution! Make sure that the luminaires and power supply units are always disconnected from the main supply during wiring and installation work. Otherwise, the LED modules may be destroyed.
- With thin or soft ceiling material it is recommended that ceiling reinforcing rings should be used to enlarge the bearing surface.
INSTALLATION
HOW TO FIX
Specifications are subject to change without notice.
Postfach 760 D-32637 Lemgo Tel. + 49/(0)5261/212-0 Fax
+49/(0)5261/212-9000 Internet : http://www.Zumtobel.com
Mat.-Nr: 06 979 997/4/00 03 .23
FAQ’s
What is the IP rating of the PANOS INF R100 LDO ACC?
The PANOS INF R100 LDO ACC has an IP rating of IP20 for indoor use and IP44 when installed in an enclosed ceiling.
Can I cover the luminaire with thermally insulating material?
No, the luminaire should not be covered with thermally insulating material.
Can I install the PANOS INF R100 LDO ACC in any type of ceiling?
The PANOS INF R100 LDO ACC should be installed in an enclosed ceiling to ensure the IP44 protection type. It does not apply in the ceiling void itself.
What should I do if the LED modules are destroyed during installation?
Make sure that the luminaires and power supply units are always disconnected from the mains supply during wiring and installation work to avoid damaging the LED modules.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>