PETLIBRO PLAF301 Air WiFi Feeder User Manual

PETLIBRO PLAF301 Air WiFi Feeder User Manual

Please read this manual before using the product and keep it for future reference

Safety Instructions

• Use the feeder in a dry place.
• Use the feeder on a level surface.
• Dispose of all packaging materials properly. Some items may be packed in plastic bags; these bags could cause suffocation. Keep them away from children and pets.
• Do not use the feeder with pets that are not able to reach the food bowl or with any physical disability.
• Do not immerse the base part in water at any time as it may damage electronic components.
• Do not use the feeder outdoors. Check its operation frequently to be sure it is operating properly.
• Do not disassemble the feeder other than as instructed in this user manual.
• Only use accessories recommended or sold by the manufacturer. The use of accessories not recommended or sold by the manufacturer may cause an unsafe condition.
• Do not modify the feeder.
• Examine the feeder after installation. Do not plug in if there is water on the power cable or plug.
• To avoid tripping, always position the power cable out of the way of foot traffic.
• Do not install or store the feeder where it will be exposed to weather or temperatures below 0°C (32°F).
• Do not use the feeder without adding pet food first.
• Power off the feeder when it’s not in use.

In the Box

• Automatic Pet Feeder **X1

**

• Stainless Steel Food Bowl with Holder **X1

**

• Power Adapter **X1

**

• Desiccant Bag

• Food Bowl Shield **X 2

**

• User Manual **X1

**

• Quick Start Guide **X1

**

• Food Bowl Lid **X1

**

• Collar X1
  
  

• RFID Reader  **X1

**

• Tag **X1

**

Product Overview

1. Food Tank Lid

2. Desiccant Bag Holder

3. Food Tank

4. Infrared Sensor A (Detects pet)

5. Control Panel

6. Infrared Sensor B (Detects food levels)

7. LED Display

8. Feeder Base

9. Food Bowl Lid Pivot Lock

10. Food Outlet

11. Infrared Sensor C (Detects food blockages)
    

12. Food Bowl Shields

13. Food Bowl Lid

14. Stainless Steel Food Bowl

15. Bowl Tray

16. RFID Reader

17. RFID Reader Prongs
    

18. Battery Compartment

19. Battery Compartment Cover
    

20. Speaker

21. Power Port

22. Food Tank Lock
    

Buttons

Reset| In the unlocked state, press and hold until the feeder emits a reminder sound and the Wi-Fi indicator flashes.

Lid Release| In the unlocked state, press once to open/close the food bowl lid

Feed| In the unlocked state, press once to dispense one portion

Unlock| Press and hold for five seconds to unlock the buttons, and the feeder will emit a reminder sound. In the locked state, only this button will work

Indicators Overview

content/uploads/2024/01/Screenshot_23-409.png)
Locked state|
Unlocked state|
Waiting for Wi-Ficonnection|
Successful Wi-Ficonnection|
Resetting|
OTA updating|
Dispensing food|
Customized emoji pack|
Wi-Fi connection is abnormal/offline|
Abnormal food bow llid closing|
Abnormal foo’s bow llid opening|
Low battery K|

Indicator Status

Getting Started

Installation
Scan the QR code below to watch the video for product installation, or follow the instructions in the manual to install the feeder.

1. Install the food bowl lid

2. Press the locks on both sides of the food tank lid, remove the lid, and take out the accessories from the food tank.

3. Install the food bowl lid in the direction shown in the figure.
   

4. After successfully installing the food bowl lid, move the food bowl lid pivot lock to the left to ensure that it’s in the locked state.
   Notes: If the food bowl lid is unlocked, the product will not work properly.
   

5. Install the body

6. Place the RFID reader on a flat surface, keeping it close to the power port and away from metal objects.
   

7. Place the stainless steel food bowl and bowl tray in the designated groove of the reader.
   

8. Open the battery compartment at the bottom of the feeder. Install three alkaline D batteries (not included) in case of a power outage.
   
   Notes:

  * Batteries are not included.
  * To avoid sudden power outages and the feeding of your pet being affected, do not use the batteries as the only source to power the feeder; the batteries can only be used as an emergency plan.
  * To avoid battery leakage, remove the batteries if the device won’t be in use for a period of time.
  * When powered in battery mode, only the RFID recogni- tion function, Wi-Fi function, and feeding function are enabled; all other functions are disabled.
4. Plug the USB cable into the power port at the bottom of the feeder.  

5. Place the body in the designated position on the reader.  

Note: When installing the body on the RFID reader, if you hear a ‘click’ sound, it indicates that the body is properly installed.

3. Install the food bowl shields
   Insert both shields into the body.
   

4. Install the food tank
   Press the food tank lock to lock it in place.
   

5. Add dry pet food to the food tank
   Notes:

   • To prevent uneven food dispensing, please add enough pet food to prevent low surplus food alarm triggered.
   • Recommended kibble size: 2-18mm (0.07-0.7in) in diameter.
   • Do not use canned, wet, or moist food.
     

6. Put the food tank lid on
   Place the desiccant bag in the holder under the food tank lid.

Notes:

  * It is recommended to change the desiccant bag every 15 days to prevent mold growth.
  * Remove the desiccant bag before cleaning the lid. Press the locks on both sides of the food tank lid to install the lid in place.

7. Connect Power
8. Plug the 5V power adapter into a power outlet.
9. The indicators will light up automatically to indicate the feeder is on.
   

App Control

1. Download and install the PETLIBRO app.
   
   
   Note:
   There are two similar apps available on your phone’s app store: PETLIBRO and PETLIBRO LITE. Please make sure you download the right one.

2. Follow the instructions to configure the network.
   

Pair The Collar Tag

1. After successfully adding the device, tap the “ADD COLLAR” button.

2. Place the collar tag in the RFID recognition area, as close to the RFID reader as possible.
   Note: There are two methods to pair the collar tag: sensor-based pairing and QR code-based pairing. If one method fails, you can switch to the other.

3. After a successful addition, tap “CONFIRM” to pair the collar tag.

4. Follow the app instructions to add relevant pet information.

Care And Maintenance

Note:
Scan the QR code above to watch the video for product installation and cleaning.

• Power off the device before cleaning.
• Clean the food bowl with tap water.
• Do not clean the feeder in a dishwasher. Only the stainless steel bowl is dishwasher safe.
• Use a soft damp cloth to clean the feeder base. Do not wash any part with electronic components.
• Replace the desiccant bag every half a month to keep food fresh.

Power off
Unplug the cable from the outlet and remove the batteries.

Specifications

FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

ISED Statement:
-English: This device complies with Industry Canada license – exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES 3 (B)/NMB 3(B).
– French: Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation estautorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, memes le brouillage est susceptible d’en compromettre le fonctionnement. l’appareil numérique du ciem conforme canadien peut 3 (b) / nmb 3 (b).

This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

cet appareil est conforme à l’exemption des limites d’évaluation courante dans la section 2.5 du cnr – 102 et conformité avec rss 102 de l’exposition aux rf, les utilisateurs peuvent obtenir des données canadiennes sur l’exposition aux champs rf et la conformité. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme aux limites d’exposition au rayonnement établies par le Canada pour un environnement non contrôlé.

This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet équipement est conforme Canada limites d’exposition aux radiations dans un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.

The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. L’appareil destiné à fonctionner dans la bande 5150-5250 MHz est uniquement destiné à une utilisation en intérieur afin de réduire le potentiel d’interférences nuisibles aux systèmes mobiles par satellite cocanaux.

ONE
RFID Pet Feeder @Libro Corp. All Rights Reserved.
Model: PLAF301
Manufacturer: Shenzhen Libro Technology Co., Ltd.
Address: 12/F, Tower B, GALAXY WORLD, Yabao Road, Longgang District, Shenzhen, China
Made in China   PLAF301_V1.0

FCC ID: 2A3DE-PLAF301 IC : 28987-PLAF301 CAN ICES-3(B)/NMB-3(B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>