OMNIA Magnetic Wireless Car Charger User Manual
- June 7, 2024
- OMNIA
Table of Contents
OMNIA Magnetic Wireless Car Charger User Manual
Specification
Input Interface:
USB-C Female | 5V ⎓ 2.4A / 9V ⎓ 2A / 12V ⎓ 1.5A (QC 3.0)
Output Power:
Magnetic Wireless Charger | 5V ⎓ 1A / 7.5V ⎓ 1A / 9V ⎓ 1.1A / 12V ⎓ 1.25A, 15W max.
Compatibility:
- Supports iPhone 12/ iPhone 12 mini / iPhone 12 Pro / iPhone 12 Pro Max
- Optimum width of the phone: 61~85mm
- Mag Safe compatible
Notes:
When charging Mag Safe compatible devices, OMNIA C2 supports charging up to
7.5W.
Size: 65 x 100 x 72 mm
Weight: 80 g
Warranty: 3 years
Product Introduction
Compatible with various air vents:
Caution:
To avoid any damage to wireless charger, please check the output voltage of the power source is suitable for the charger.
Installation
-
Loosen the nut.
-
Insert ball head into socket
-
Tighten the nut clockwise
-
Press down the top clip and hold until insert into air vent
- SNAP your phone and enjoy your trip!
Protective Function
Multiple Circuit Protection
Over-Heat Protection
Short-Circuit Protection
Over-Voltage Protection
Over-Current Protection
Flame Retardant Protection
Attention
Do not disassemble, puncture, drop, bend or modify
Do not shake while charging
Unplug the device when fully charged
Do not expose to liquids
Keep away from children
Avoid extreme temperatures
3 years warranty
For the fastest and safest charge, use an ADAM cable, your device’s original
cable or a certified cable (such as MFi)
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condirions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions,may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
https://www.adamelements.com/store/index.php
For more information please visit ADAM store