Shenzhen Gpd Technology G1618-03 Win 3 to 5.5 Inch Mini GamePlayer Handheld Video Game Console User Manual
- June 6, 2024
- Shenzhen Gpd Technology
Table of Contents
Shenzhen Gpd Technology G1618-03 Win 3 to 5.5 Inch Mini GamePlayer
Handheld Video Game Console
Interface Description
1
|
USB-A interface
|
Connect to a docking station, USB flash drive or any other external device for data transmission.
Connect to a smartphone for charging.
Connect to any external portable Wi-Fi or USB network adapter for surfing the Internet.
The interface is available for charging but not available for reverse charging.
---|---|---
2
|
Thunderbolt 4
|
Connect to a display, docking station or any other external device for audio/video output or data transmission.
Connect to a laptop, smartphone or tablet for charging.
Connect to eGFX device for promoting gaming experience based on external graphics card.
This port supports PD protocol power adapter,allows 15V/20V output and supports charging with mobile phones,mobile power and other devices.
3| Left speaker|
Built-in speaker for voice output.
4| Right speaker|
Built-in speaker for voice output.
5
|
Charge indicator
|
Two indications: red/green.
Red/green (red: power adapter is plugged in; green: fully charged; light off: power adapter is plugged off; red/green flicker in alternation no battery is detected.)
6
|
Running indicator
|
Blue indication.
Stay on after starting up; show breathing light in sleep mode.
7
|
L1/L2
|
Handle’s left trigger key, wherein L2 is intended for linear emulation. In gaming, it is hooked by the left index finger to implement some actions and forms key combinations with other keys from time to tim
---|---|---
8
|
R1/R2
|
Handle’s right trigger key, wherein R2 is intended for linear emulation In gaming, it is hooked by the right index finger to implement som actions and forms key combinations with other keys from time to tim
In mouse mode, press R2 to speed up mouse movement.
9| Display screen|
Image display, available for touch control.
10
|
Handle/mouse toggle key
|
Switch between handle mode and mouse mode.
In the handle mode, handle is activated. Mouse is controlled via touch panel only but keyboard is available for input. In the mouse mode, handle is off but mouse is activated. The handle rockers emulate the trajectory of mouse movement, L1 key emulates the left key of mouse and R1 key emulates the right key of mouse.
11
|
Left rocker
|
Handle’s left rocker
In mouse mode, the left rocker is intended for upward/downward scrolling.
12
|
Right rocker
|
The handle’s right rocker can act as the mouse wheel
In the mouse mode, the right rocker becomes a mouse wheel.
13
|
D-Pad key
|
Handle’s direction key
After switching to the mouse mode, up and down arrow keys are
↑↓ keys on keyboard and the left arrow key is PgDn on keyboard.
14
|
ABXY key
|
Gaming function key
Each function key has two screen printing characters, facilitating identification of emulator games–PS and Xbox.
---|---|---
15| START key|
Typically for confirming that game gets started.
16
|
SELECT key
|
In the handle mode, SELECT key is often used for selecting in gaming control settings.
SELECT key is needed in typical shortcut login and goldfinger activation.
17
|
Xbox key
|
For Xbox 360 handle only.
In Xbox gaming through streaming, Xbox key acts as the handle switch. Besides, it also has functions of “back to home”, “long press to shut down”, “screen capture and video recording”, “sync display switch”, etc.
18
|
Power key
|
For startup, shutdown, sleep, wakeup.
Press 2~3s to start up. In the on status, quickly press to sleep and then press again to wake up. Long press 7~8s to shut down.
19
|
Touch keyboard
|
For entering English letters, figures, punctuation marks, etc. Slide to turn on.
Keyboard has backlight. Slide and the white backlight will be on and then off 30s later.
20| Earphone/ microphone interface|
3.5mm earphone/microphone two-in-one interface.
21| Microphone port|
Independent microphone port
---|---|---
22
|
MicroSD card slot
|
Available for any MicroSD card.
Available for any MicroSD card with A2/U3/C10/V30 specification and downward compatible to any MicroSD card with A1/U1/C10 specification.
23| Air inlet|
Cold air inlet.
24| Air outlet|
Hot air outlet.
25| Volume +/-|
Control volume of speaker.
26
|
Fingerprint unlock
|
One-key unlock system
Unlock locked Windows desktop based on fingerprint information entered.
27
|
Custom key
|
User-defined function key
Through the “key modifier” integrated in the system, modify the custom key to any other key (modify the key value), e.g., ESC key.
Charge device
Charge device by power adapter
The device has a built-in (non-detachable) rechargeable battery. Connect
accessory power adapter and Thunderbolt 4 interface USB cable to outlet. When
the charge indicator turns red, it indicates charging; when it turns green, it
indicates fully charged. In shutdown or sleep mode, battery is charged faster
.
Precautions for charging
Please use an accessory power adapter and Thunderbolt 4 interface USB cable to
charge the device.
The use of third-party parts may give rise to performance degradation in the
device and have potential safety threats. Please charge the device somewhere
cool and ventilated within the appropriate temperature range.
- Charging in a high-temperature environment may cause damage to the device.
- Charging duration varies by temperature and usage of battery.
- Running for a long time or charging, the device may get heated on the surface, which is normal. If the device gets too hot, please disable some functions and stop charging.
Understand battery status
You may determine the current battery status based on the electric energy icon on the screen.
- When the device is powered on, the battery icon will indicate connected.
- When the device is working, move the cursor to the battery icon to view the remaining electric energy and available time.
- The battery is consumable. In the event of a sharp decline in standby time, please do not replace the battery at discretion. Instead, please contact the store’s customer service staff for getting an original battery.
Start up and shut down device
Before starting up for the first time ever, please connect the power adapter
and Thunderbolt 4 interface USB cable to charge the device. In shutdown or
sleep mode, short press the power key till the screen is turned on to start up
or wake up the device.
- When the device runs well, click > to make the device enter sleep, shutdown or reboot status.
- Long press the power key for 10s to force close the device. The force close may cause loss of data unsaved.
Keyboard function keys
Blue characters on the device keyboard are in HotKey Mode by default and shall
be used with Fn, to perform common tasks.
Specification
Environmental Requirement
| Temperature: 0℃~70℃
---|---
Humidity: 20~80（%RH）
Audio Output| 3.5mm
Video Output
| 4K Video Output
4K×2K Resolution Support
Adapter| ****
Input Voltage DC 20V — 3.25A
Power| 15~18W，18~22W，22~28W
Standby Power| 0.1W
Dimension| 198×92×27mm
Net Weight| 550g approx.
SN| Description| Unit(s)
---|---|---
1| GPD WIN 3| 1
2| Type-C Data Cable| 1
3| Power Adapter| 1
4| User Manual| 1
Note: Please use the origin AC Adapter, as low input voltage can cause
insufficient power supply.
Tips: Accessories in kind prevail
Manufacturer: GPD
Address: Room 1006 Block 4D, Software Industry Base, Hight tech park,
Nanshan district, Shenzhen. Guangdong Province,518000, china
Tel: +86 755 86572275
Site: www.gpd.hk
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>