AJAX 20338 Street Siren Double Deck User Manual

AJAX 20338 Street Siren Double Deck User Manual

USER MANUAL

StreetSiren DoubleDeck is a wireless outdoor siren with mount for the branded faceplate. Equipped with a LED frame and piezoelectric alarm indicator producing sound volume up to 113 dB, StreetSiren can operate up to 5 years from pre-installed batteries. It can also be powered from an external 12 V power supply.

StreetSiren DoubleDeck communicates with the hub via the secured Jeweller radio protocol. The communication range is up to 1,500 meters provided there are no obstacles.

WARNING : The siren only works as part of the Ajax security system. Integration with third-party systems and connection to ocBridge Plus or uartBridge are not supported.

The siren is set up via for iOS, Android, macOS, and Windows. Thesystem notifi es users of all events with push notifi cations, SMS, and calls (if ocBridge Plus uartBridge Ajax apps activated).

Buy street siren StreetSiren DoubleDeck
Buy branded faceplate for StreetSiren DoubleDeck

The Ajax security system can be connected to a central monitoring station (CMS)of the security company. A list of security companies is available on the website.

Specifications:

• Wireless outdoor siren
• LED frame
• Piezoelectric alarm indicator with sound volume up to 113 dB
• Operates up to 5 years from preinstalled batteries
• Can be powered from an external 12 V power supply
• Communicates with the hub via the secured Jeweller radio protocol
• Communication range up to 1,500 meters (no obstacles)
• Integration with third-party systems and ocBridge Plus or uartBridge not supported

Functional Elements:

1. LED frame
2. Piezoelectric alarm indicator
3. Latches for mounting the Brandplate (sold separately)
4. Place for fixing the Brandplate with a screw
5. SmartBracket mounting panel
6. Terminals for connecting a third-party power supply unit
7. QR code (includes ID/serial number of the device)
8. On/off button
9. Place for fixing the SmartBracket panel with a screw

Operating Principle:

When installed properly, it is hard to dismount and disconnect an activated siren. The siren’s body is robust, the buzzer is protected, and it can continue to work even if there is a power outage at the location. The power button is blocked when the system is armed, preventing the siren from being turned off. The siren is equipped with a tamper button and an accelerometer. The tamper button is triggered when the device body is opened or broken, and the accelerometer is triggered when someone attempts to move or dismantle the device.

Functional elements

1. LED frame.
2. Piezoelectric alarm indicator.
3. Latches for mounting the Brandplate

Note: The Brandplate is sold separately

4. Place for fi xing the Brandplate with a screw.
5. SmartBracket mounting panel.
6. Terminals for connecting a third-party power supply unit.
7. QR code. The QR code includes the ID/serial number of the device.
8. On/off button.
9. Place for fixing the SmartBracket panel with a screw.

Operating principle

StreetSiren DoubleDeck performs two tasks:

1. Informs about the alarm. The device responds to triggering of the tamper and security system alarms in less than a second, including a siren and LED backlight, which scares off intruders and attracts the attention of neighbors.
2. Serves as a security status indicator. The siren uses LED indication to notify that the object is armed, as well as uses sound and LEDs to notify about the delay when entering/leaving. These functions will be useful when controlling the security system using SpaceControl or KeyPad (the siren reminds you of disarming when you enter the object).
What is Delay When Entering/Leaving

When installed properly, it is hard to dismount and disconnect an activated siren:
its body is robust, the buzzer protected, and power is from the bundled batteries, so the siren will continue to work even if there is a power outage at the object. Also, if the system is armed, the power button is blocked, preventing the siren from beingturned off.

The siren is equipped with a tamper button and an accelerometer. The tamperbutton is triggered when the device body is opened/broken, and the accelerometeris triggered when somebody’s attempting to move or dismantle the device.

What is a tamper

Tamper  is a miniature button on the device board. It reports an alarm in case of opening the device enclosure, removing the device from the mounting panel, or detaching it from the surface.

The tamper status is displayed in Ajax apps, in the  Enclosure  section in the states of each device. When the body status is  Open , a fault symbol appears on the device icon.

Connecting a siren to a hub

Before starting connection

1. Install the Ajax app Create an account . Add a hub to the app and create atleast one room.
2. Make sure that the hub is on and has Internet access. The status of theInternet connection is available in the Ajax app and is also indicated by thecolor of the hub’s logo (lights white or green).
3. Make sure that the hub is disarmed and is not starting updates
This can be checked in the Ajax app.

NOTE : Only users with administrator rights can connect the StreetSiren DoubleDeck to the hub.

To connect StreetSiren DoubleDeck

1. Go to the Devices tab in the Ajax app and click Add Device.
2. Name the device, scan or type the QR code (located on the body andpackaging), and select the location room.

3. Click Add; the countdown will begin.
4. Turn on StreetSiren DoubleDeck by holding the power button for 3 seconds. Keep in mind that the hub connection request is only sent when the siren is turning on.

The power button is recessed into the body and is tight to press. You can use a thin, hard object, like a pencil, to press it.

For detection and pairing to take place, StreetSiren DoubleDeck must be within the hub’s radio communication range, i. e. at the same guarded object.
StreetSiren DoubleDeck shuts down automatically 6 seconds after turning on if it failed to connect to the hub. There is no need to deactivate the device to retry the connection. If StreetSiren DoubleDeck has already been assigned to another hub, turn off the siren and follow the standard addition procedure.

The connected siren will appear in the list of hub devices in the app. Updating device statuses in the list depends on the ping time de?ned in Jeweller settings. The default value is 36 seconds.

Up to 10 sirens can be connected to one hub.

States of StreetSiren DoubleDeck

Icons
Icons display some of the StreetSiren DoubleDeck states. You can view them in the Ajax app, in the Devices menu .

States

Siren states can be found in the Ajax app:

1. Go to the Devices tab .
2. Select StreetSiren DoubleDeck from the list.

gradually.
Acceptable error between the value in the app andthe room temperature — 2°C.
The value is updated as soon as the detectoridentifi es a temperature change of at least 2°C.
You can confi gure a scenario by temperature tocontrol automation devices
Jeweller Signal Strength| Signal strength between the hub/range extenderand siren.
We recommend installing the siren in places withthe signal strength of 2-3 bars
Connection via Jeweller| Connection status between the hub/rangeextender and StreetSiren DoubleDeck:
— the siren is connected to thehub/range extender Offline
— the siren is not connected to thehub/range extender online
Battery Charge| Battery level of the device. Two states available:
ОК
Battery discharged
How battery charge is displayed inAjax apps
https://support.ajax.systems/en/battery-charge-displayed-in-app/
Lid| The tamper status of the device, which respondsto the opening of the device body
What is a tamper
https://support.ajax.systems/en/faqs/what-is-a-tamper/
ReX Range extender name| Displays when the siren is operating via a radio signal range extender
https://ajax.systems/products/range-extenders/
External Power| External power supply status of the siren:
Connected — external 12 V power supply isconnected to the siren
Disconnected — siren powered by pre-installed batteries
Alarm Volume| Volume level in case of alarm:
Muted
Quiet
Loud
Very loud
Alarm Duration| Duration of sound signal in case of alarm: from 3seconds to 3 minutes.
Sets in increments of 3 seconds
Alert If Moved| Alarm when the accelerometer is triggered. Whenenabled, the siren is triggered if you turn the bodyor detach the device from the mount
LED indication| If enabled, the siren LED frame blinks once every2 seconds when the system is in the armed mode
Disabled — LED indication is off
Armed — the siren blinks only when in thearmed mode
Always — the siren blinks regardless of thestate of the security system
Beep When Arming/Disarming| If enabled, the siren alerts you by backlighting theLED frame and a short beep when arming anddisarming
Notify about arming/disarming of the Night mode| If enabled, the siren alerts you by backlighting theLED frame and a short beep when arming anddisarming the system from the Night mode
Beep on Entry/Exit delay| If this option is enabled, the siren signals about adelay when entering/leaving
Notify about the entry/exit delay in the Nightmode| If this option is enabled, the siren beeps to signalabout an entry/exit delay in the Night mode
Chime on opening| When enabled, a siren notifi es about openingdetectors triggering in the Disarmed systemmode
What is chime
https://support.ajax.systems/en/what-is-opening-alerts/
Beep volume| Volume of the audible notifi cation signal aboutarming/disarming, entry/exit delay, openingdetector triggering:
Quiet
Loud
Very loud
Permanent Deactivation| Shows the status of the device: active, completelydisabled by the user, or only notifi cations abouttriggering of the device tamper button aredisabled
Firmware| StreetSiren DoubleDeck fi rmware version. It is notpossible to change the fi rmware
ID| StreetSiren DoubleDeck ID/serial number. Alsolocated on the device packing box and under theSmartBracket mount
Device No.| Number of the device loop (zone)

Settings

To set up StreetSiren DoubleDeck:

1. Go to the Devices tab in the Ajax app.
2. Select StreetSiren DoubleDeck from the list.

3. Go to Settings by clicking on the .

Note that after editing the settings, you should click the Back button to save them.

noti?cations in the event feed.
The name can contain up to 12 Cyrillic characters or up to 24 Latin symbols
Room| Selecting the virtual room to which StreetSiren DoubleDeck is assigned. The room name you can see at noti?cations in the event feed
Alarms in Group Mode| Selecting the group to which the siren is assigned. You can select one or all groups:
When assigned to a group, the siren and its indication are related to alarms and events of this group
When attached to all groups, the siren and its indication are related to alarms and events of all groups in the system
Regardless of the group selected, the siren will respond to Night Mode
https://support.ajax.systems/en/what-is-night-mode/
Learn More
https://support.ajax.systems/en/ajax-group-mode/
Alarm Volume| The siren responds to system alarms with the selected volume:
Muted — the siren does not sound when the alarm is raised
Quiet — 85 dB volume
Loud — 100 dB volume
Very loud — 113 dB volume
The volume level is measured 1 m away from the siren
Alarm Duration| Duration of sound signal in case of alarm: from 3 seconds to 3 minutes.
Sets in increments of 3 seconds
Alert If Moved| Alarm when the accelerometer is triggered: the siren is triggered if you turn the body or detach the device from the mount.
The built-in accelerometer takes 60 seconds to remember the normal position. Do not rush to check the performance of the function before this time expires
LED indication| LED indication of the siren settings:
Disabled — LED indication is off
Armed — LED blinks once every 2 seconds only when the system is armed
Constantly — LED blinks once every 2 seconds regardless of the mode state
Beeps settings| Opens the siren noti?cation settings. A detailed description of the settings is available below
Volume Test| Switches the device to the volume test mode
What is Volume Level Test
https://support.ajax.systems/en/faqs/what-is-volume-level-test/
Jeweller Signal Strength Test| Switching the siren to the Jeweller signal strengthtest mode. The test allows you to check the signallevel between the hub and StreetSiren
DoubleDeck and determine the optimalinstallation location
What is Jeweller Signal Strength Test
https://support.ajax.systems/en/what-is-signal-strenght-test/
Signal Attenuation Test| Switching StreetSiren DoubleDeck to the signalattenuation test mode
What is Attenuation Test
https://support.ajax.systems/en/what-is-attenuation-test/
User Guide| Opens the StreetSiren DoubleDeck User Guide
Permanent Deactivation| Allows the user to disconnect the device withoutremoving it from the system (available forStreetSiren DoubleDeck with fi rmware version3.71 and later).
Three options are available:
No— the device operates normally andtransmits all events
Entirely— the device will not execute systemcommands or participate in automationscenarios, and the system will ignore devicealarms and other notifi cations
Lid only— the system will ignore onlynotifi cations about the triggering of the devicetamper button
Learn more about permanentdeactivation of devices
https://support.ajax.systems/en/how-to-deactivate-device/
Unpair Device| Unpairs StreetSiren DoubleDeck, disconnects itfrom the hub, and deletes its settings

Siren beeps settings

Arming/Disarming| When this option is enabled, the siren warns ofarming and disarming by lighting of the LEDframe and by a short beep
---|---
Night Mode Activation/Deactivation| If enabled, the siren alerts you by backlighting theLED frame and a short beep when arming anddisarming the system from the Night mode
What is Night mode
https://support.ajax.systems/en/what-is-night-mode/
Entry Delays| If this option is enabled, the siren beeps to signalabout an entry delay
What is Delay When Entering/Leaving
https://support.ajax.systems/en/what-is-delay-when-entering/
Exit Delays| If this option is enabled, the siren beeps to signalabout an exit delay
What is Delay When Entering/Leaving
https://support.ajax.systems/en/what-is-delay-when-entering/
Entry Delays in Night Mode| If this option is enabled, the siren beeps to signalabout an entry delay in the Night mode
What is Night mode
https://support.ajax.systems/en/what-is-night-mode/
What is Delay When Entering/Leaving
https://support.ajax.systems/en/what-is-delay-when-entering/
Exit Delays in Night Mode| If this option is enabled, the siren beeps to signalabout an exit delay in the Night mode

What is Night mode
https://support.ajax.systems/en/what-is-night-mode/
What is Delay When Entering/Leaving
https://support.ajax.systems/en/what-is-delay-when-entering/

Chime on opening| When enabled, the siren beeps 1 to 4 times toindicate that opening detectors in the Disarmedsystem mode were triggered.
What is Chime
https://support.ajax.systems/en/what-is-opening-alerts/
How to set up Chime
Beep volume| Selecting the volume level of the siren at the time of noti?cation on arming/disarming or delay when entering/leaving and opening:
Quiet — 85 dB volume
Loud — 100 dB volume
Very loud — 113 dB volume
The volume level was measured 1 m away from the siren

Setting up the processing of detector alarms

Through the Ajax app, you can con?gure which detector alarms can activate the siren. This can help to avoid situations when the security system noti?es of LeaksProtect leak detector alarm or any other device alarm. The parameter is adjusted in the detector or device settings:

1. Sign in to the Ajax app.
2. Go to the Devices menu .
3. Select the detector or device.
4. Go to its Settings and define the necessary activation parameters for the siren.

Setting the tamper alarm response

The siren can respond to the tamper alarm of devices and detectors. The option is disabled by default. Note that the tamper reacts to the opening and closing of the body, even if the system is not armed!

What is a tamper

For the siren to respond to tamper triggering, in the Ajax app:

1. Go to the Devices menu .
2. Select the hub and go to its Settings .
3. Select the Service menu.
4. Go to Siren Settings.
5. Enable the Alert with a siren if the hub or detector body is open option.

Setting the response to pressing the panic button in the Ajax app

The siren can respond to pressing the panic button in Ajax apps. Note that the panic button can be pressed even if the system is not armed!

For the siren to respond to pressing the panic button:

1. Go to the Devices tab .
2. Select a hub and go to its Settings .
3. Select the Service menu.
4. Go to Siren Settings.
5. Enable the Alert with a siren if the panic button is pressed in the app option.

Setting the siren after-alarm indication

The siren can inform about triggerings in the armed system by means of LED indication.

The option functions as follows:

1. The system registers the alarm.
2. The siren plays an alarm (duration and volume depend on settings).
3. The lower right corner of the siren LED frame blinks twice (about once every 3 seconds) until the system is disarmed.

Thanks to this feature, system users and passing security companies patrols can see that the system was triggered.

Note: The siren after-alarm indication does not work for always active detectors, if the detector was triggered when the system was disarmed.

To enable the siren after-alarm indication, in Ajax PRO app

1. Go to siren settings:

• Hub → Settings → Service → Siren Settings

2. Specify what events the sirens will inform about by double blinking before the security system is disarmed:

• Confirmed alarm
• Unconfirmed alarm
• Lid opening

3. Select the sirens needed. Go back to Siren Settings. The set parameters will be saved.

4. Click Back. All values will be applied.

WARNING: StreetSiren DoubleDeck with ?rmware version 3.72 and later supports this function.

How to set Chime

Chime is a sound signal that indicates the triggering of the opening detectors when the system is disarmed. The feature is used, for example, in stores, to notify employees that someone has entered the building.

Notifications are configured in two stages: setting up sirens and setting up opening detectors.

Learn more about Chime

Warning: Chime is supported by StreetSiren DoubleDeck with fi rmware version 3.73.1.0 and later.

Siren settings

1. Go to the Devices menu .
2. Select the siren.
3. Go to its settings by clicking the gear icon in the upper right corner.
4. Go to the Beeps Settings menu.
5. Scroll down and enable the Chime on opening option in the Beep when disarmed category.
6. Set the volume of the notifications. 3 options are available:

• Quiet (85 dB at a distance of 1 m).
• Loud (100 dB at a distance of 1 m).
• Very loud (113 dB at a distance of 1 m).

The specified Beep volume also applies to the volume of siren noti?cations when arming/disarming and for the entry/exit delays.

7. Click Back to save the settings.
8. Repeat steps 2–7 for other sirens on which you want to enable the noti?cations.

Detectors settings

1. Go to the Devices menu .
2. Select the detector.
3. Go to its settings by clicking the gear icon in the upper right corner.
4. Go to the Chime Settings menu.
5. Select the events to be notified by the siren:

• If a door or a window is open.
• If an external contact is open (available if the External Contact option is enabled).

6. Select the chime sound (siren tone): 1 to 4 short beeps. Once selected, the Ajax app will play the sound.
7. Click Back to save the settings.
8. Repeat steps 2–7 for other detectors on which you need to enable the noti?cations.

Indication

The duration and volume of the alarm, as well as the presence of LED indication, depends on the siren settings
An alarm was detected in the armed system (if after-alarm indication is enabled)| The siren LED frame blinks red twice in the lower right corner about every 3 seconds until the system is disarmed.
The indication turns on after the siren has completely played the alarm signal con?gured in settings
Switching on| The LED frame blinks red once
Switching off| The LED frame lights up red for 1 second and then blinks 3 times
Hub connection failed| The LED frame blinks 6 times in the lower right corner. Then the whole LED frame blinks 3 times, and then the siren turns off
Security system is armed (if indication is enabled)| The LED frame blinks once, and the siren emits a short beep
Security system is disarmed (if indication is enabled)| The LED frame blinks twice and the siren emits two short beeps
Siren in the armed mode (if indication is enabled)| The LED in the lower right corner lights up every 2 seconds. When external power supply is connected, the LED frame in the lower right corner lights constantly
Battery low| The LED in the lower right corner lights up and goes out when arming and disarming, alarming, dismantling, or opening the siren

Functionality test

The Ajax security system allows conducting tests for checking the functionality of connected devices.
The tests do not start straight away but not later than over a single hub–detector ping period (36 seconds with the standard settings of the hub). You can change the ping period of devices in the Jeweller menu of the hub settings.

Tests are available in the device settings menu:

• Ajax App → Devices → StreetSiren DoubleDeck → Settings

Jeweller Signal Strength Test

Volume Level Test

Attenuation Test

Choosing a location

The placement of StreetSiren DoubleDeck determines its distance from the hub and the presence of obstacles between them that impede the passage of the radio signal: walls, inter-?oor constructions, or large-sized objects located in the room.

When choosing a place, take into account the audibility of the siren, as well as the visibility of its LED indication, as this determines the device performance.
StreetSiren DoubleDeck withstands heat, cold, and temperature drops. The sealed body is certi?ed and complies with protection class IP54. The outdoor siren is protected from rain and snow and can be installed on the facade of the building without a canopy.

NOTE: Be sure to check the signal strength at the installation site. If the signal strength is low (a single bar), we cannot guarantee a stable operation of the security system! At the very least, relocate the device as repositioning even by 20 cm can significantly improve the signal reception.

If after moving the device still has a low or unstable signal strength, use a radio signal range extender.

Installation

Connecting a third-party power supply unit

When connecting a third-party power supply unit and using StreetSiren DoubleDeck, follow the general electrical safety regulations for using electrical appliances, as well as the requirements of regulatory legal acts on electrical safety.

StreetSiren DoubleDeck runs on bundled battery for up to 5 years and is equipped with terminals for connecting 12V DC power supply unit. The connection of external power supply is recommended in order to avoid rapid discharge of batteries in the case of installation in places characterized by low temperatures or when frequent siren activations are reported.

WARNING: Before installing the device, be sure to check the insulation of the wires for damage. Use only a grounded power source. It is strictly forbidden to disassemble the device under voltage! Do not use the device with a damaged power cable.

To connect a third-party power supply unit:

1. Drill a hole for a cable anywhere in the indicated area of the SmartBracket mounting panel.

2. Route the dead power supply unit cable through the mounting panel.
3. Connect the cable to the terminal strips observing polarity.

4. Turn on power — the External Power Supply field value changes to Connected in StreetSiren DoubleDeck statuses.
5. Install the siren.

After connecting external power supply, do not remove the batteries from the siren: they act as a backup power source.

Note: The system will send a noti?cation about the need for service as soon as the battery level drops to 20%.

Mounting the Brandplate

In order to mount the faceplate:

1. Turn off the external power of the siren, if connected.

2. Unscrew the fixing screw from the bottom of the siren with a PH2 screwdriver if the siren is mounted on the SmartBracket mounting panel.

3. If the SmartBracket mounting panel is fixed to the surface, remove the siren: turn it counterclockwise and pull. If the mounting panel is not ?xed to the surface, turn the panel counterclockwise and remove it from the siren.

4. Turn off the device by pressing the power button for 3 seconds.

5. Turn off the external power supply (if applicable) by unscrewing the terminal blocks and disconnecting the power wires.

6. Place the front side of the siren on a hard surface and unscrew the 4 screws on the rear panel with a PH2 screwdriver.

7. Turn the siren over while holding the front and back of the body. Remove the protective plastic panel.

When installing the panel, do not remove the plastic frame and do not remove the LED strip from the seat!

8. Drill a hole in the plastic protective plate at the defined location.

Non-hardening sealant may be on the piezoelectric detector and in the hole of the protective plastic panel. Do not wipe it! If the sealant contaminates your hands, wipe it off with a napkin.

9. Mount Brandplate on the protective plastic panel.

10. Fix the Brandplate to the protective plastic panel using the bundled bolt.

11. Fit the protective plastic panel in place (the Ajax logo on the connection side of the LED strip to the board) with little effort. The properly mounted plastic panel will protrude above the LED frame no more than 1.0 to 1.5 mm.

12. Turn the siren over while holding the front and back of the body, and tighten 4 screws.

13. Turn on the siren and check the status of tampers in the app.

Siren mounting

Before mounting the siren, be sure to choose the optimal location that meets the requirements of this manual.

The recommended installation height is 2.5 meters or more. This will make dificulties for intruders to access the device. If you try to detach the device from the mount, the system will raise an alarm. The security company and users will receive a noti?cation of a sabotage attempt, and the sound of a siren will scare away the intruders.

In order to install a siren:

1. Fasten the SmartBracket mounting plate to the surface using the bundled screws. When using other fasteners, make sure they do not damage or deform the panel.

WARNING: Do not use double-sided adhesive tape for either temporary or permanent mounting of the siren. The tape may break off under the weight of the siren. In addition, the tape dries up over time, which may cause the device to fall and the security system to trigger.

2. Mount the siren on the SmartBracket and turn it clockwise.

3. Secure the siren with a screw. This reduces the risk of burglary.

Do not install a siren:

• Near the metal objects and mirrors. They can shield and attenuate the radio signal.
• In places where the audio signal can be jammed.
• Closer than 1 meter to the hub.
• Near the glass break detectors.

Maintenance

Check StreetSiren DoubleDeck regularly. Clean the body from dust, cobwebs, and other contaminants as they emerge. Use a soft dry cloth that is suitable for equipment care. Do not use any substances containing alcohol, acetone, gasoline, and other active solvents to clean the device.

The batteries installed in the siren provide up to 5 years of battery life. When the batteries are discharged, the security system will send a corresponding notification, and the LED frame in the lower right corner will light up and go out when the system is arming and disarming (if the indication is disabled), when alarming, dismantling, or opening the siren body.

What is the StreetSiren DoubleDeck batteries runtime and what does it affect
How to replace batteries in StreetSiren DoubleDeck
What affects battery life in StreetSiren and how to extend it

Technical Specifi cations

integrity of the body
Compatibility| Operates only with all Ajax hubs, and radio signal range extenders
Arming/disarming status indication| Available
Indication of delays when entering/leaving| Available
Radio communication protocol| Jeweller
Learn more
Radio frequency band| 866.0 – 866.5 MHz
868.0 – 868.6 MHz
868.7 – 869.2 MHz
905.0 – 926.5 MHz
915.85 – 926.5 MHz
921.0 – 922.0 MHz
Depends on the region of sale.
Maximum RF output power| 7.29 mW (max 25 mW)
Radio signal range| Up to 1,500 m (any obstacles absent)
Learn more
Power supply| 4 × CR123A, 3 V
Battery life| Up to 5 years
Learn more
Auxiliary power supply| 12 V DC, 1,5 A
Body protection level| IP54
Operating temperature range| From –25°С to +50°С
Operating humidity| Up to 95%
Dimensions| 200 × 200 × 55 mm
Weight| 571 g
Service life| 10 years

Complete Set

1. StreetSiren DoubleDeck
2. SmartBracket mounting panel
3. CR123A battery (pre-installed) — 4 pcs
4. Mounting kit
5. Quick Start Guide

Warranty

The warranty for the Limited Liability Company “Ajax Systems Manufacturing” products is valid for 2 years after the purchase and does not apply to the bundled rechargeable battery.
If the device does not function properly, we recommend that you ?rst contact the support service as technical issues can be resolved remotely in half of the cases!

Warranty obligations
User agreement
support@ajax.systems

FAQ:

Q: Can StreetSiren DoubleDeck be powered by an external power supply?

A: Yes, StreetSiren DoubleDeck can be powered by an external 12 V power supply in addition to preinstalled batteries.

Q: How long do the preinstalled batteries last?

A: The preinstalled batteries can operate the siren for up to 5 years.

Q: Can StreetSiren DoubleDeck be integrated with third-party systems?

A: No, integration with third-party systems is not supported.

Q: Can StreetSiren DoubleDeck be connected to ocBridge Plus or uartBridge?

A: No, connection to ocBridge Plus or uartBridge is not supported.

Q: How far is the communication range between StreetSiren DoubleDeck and the hub?

A: The communication range is up to 1,500 meters, provided there are no obstacles.

Q: What happens if someone tries to tamper with the siren?

A: The tamper button is triggered when the device body is opened or broken, and the accelerometer is triggered when someone attempts to move or dismantle the device.

Q: How do I know if the siren is connected to the hub?

A: The Ajax app will display the status of the siren connection.

References

• End user agreement - Ajax Systems
• Brandplate — Faceplate for branding StreetSiren DoubleDeck
• Security system control panels | Ajax Systems
• Signal range extenders in the security system | Ajax Systems
• StreetSiren DoubleDeck — Outdoor siren with a clip lock for a faceplate
• uartBridge — Module for Ajax devices integration with third-party wireless alarms systems
• What affects the quality of radio communication between Ajax devices
• Software | Ajax Systems
• Software | Ajax Systems
• Warranty - Ajax Systems
• Where to buy — Ajax Systems
• How to enable and configure group mode in the Ajax security system | Ajax Systems Support
• How battery charge is displayed in Ajax apps | Ajax Systems Support
• How to create the Ajax account? | Ajax Systems Support
• How long StreetSiren DoubleDeck operates on bundled batteries? | Ajax Systems Support
• What is a tamper | Ajax Systems Support
• What is Volume Level Test | Ajax Systems Support
• How to deactivate a device without removing it from the system | Ajax Systems Support
• Jeweller radio protocol: technology and capabilities | Ajax Systems Support
• How to create and configure a scenario in the Ajax system | Ajax Systems Support
• What affects battery life in StreetSiren and how to extend it | Ajax Systems Support
• How to replace batteries in StreetSiren DoubleDeck | Ajax Systems Support
• What is Signal Attenuation Test | Ajax Systems Support
• What is Delay When Entering/Leaving | Ajax Systems Support
• What is Night Mode and how does it work | Ajax Systems Support
• What is Chime, and how does this function work | Ajax Systems Support
• What is Jeweller Signal Strength Test | Ajax Systems Support
• support.ajax.systems/wp-content/uploads/2022/04/streetsiren-doubledeck-1-0.jpg
• support.ajax.systems/wp-content/uploads/2022/04/streetsiren-doubledeck-3-2-2.jpg
• support.ajax.systems/wp-content/uploads/2022/04/streetsiren-doubledeck-3-2-4.jpg
• support.ajax.systems/wp-content/uploads/2022/04/streetsiren-doubledeck-9-1-1.jpg
• support.ajax.systems/wp-content/uploads/2022/04/streetsiren-doubledeck-9-1-3.jpg
• support.ajax.systems/wp-content/uploads/2022/04/streetsiren-doubledeck-9-2-10.jpg
• support.ajax.systems/wp-content/uploads/2022/04/streetsiren-doubledeck-9-2-11.jpg
• support.ajax.systems/wp-content/uploads/2022/04/streetsiren-doubledeck-9-2-12.jpg

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>