kaptel GigaSpire BLAST Ultimate ISP WIFI 6 System User Guide
- June 5, 2024
- kaptel
Table of Contents
kaptel GigaSpire BLAST Ultimate ISP WIFI 6 System User Guide
Setting up your GigaSpire BLAST
-
Connect GigaSpire BLAST to power outlet.
-
Connect one end of the supplied Ethernet cable to one of the LAN ports found on the back of the Internet access device provided by your service provider (e.g. modem or ONT) and the other end of the cable to the WAN port on the back of the GigaSpire BLAST.
-
The solid green light indicates SUCCESS!
You are connected to the Internet. -
Refer to the Quick Start Guide fort he App to setup your Wi-Fi.
Boot-up time is about 4 minutes.
NEED HELP?
Contact us by phone at 337.643.7171, email at
hello@kaptel.net, or online chat at
kaptel.net.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>