PHILIPS LUM11067CU70X1-20 Car and Truck Signaling Bulb Owner’s Manual
- June 29, 2024
- Philips
Table of Contents
PHILIPS LUM11067CU70X1-20 Car and Truck Signaling Bulb
Enjoy lasting brightness for a safer drive
Brighter, elegant signals
For a stylish drive, upgrade to Philips Ultinon Pro7000 LED [≈W16W] reverse and rear fog lights. They are bright and elegant so you can see clearly and be seen clearly, helping you drive safely and stylishly
Superior visibility for safer driving
- Signal your intent with brighter exterior lighting
- Optimized for enhanced visibility
- Ergonomic design with 360° beam pattern
High-end, stylish signaling
- Upgrade your lights, upgrade your style. Performance made to last
- Enhanced lifetime of up to 5,000 hours
- Aluminum heatsink to dissipate heat more efficiently
Simple plug-and-play replacement
- Easy to install and compatible with most car models
- Constant IC driver ensures electrical compatibility with mos
- Easy to install on your car
Car and truck signaling bulb LUM11067CU70X1/20
LED-WHITE [≈W16W] Number of bulbs: 1, 12/24V, 6000 K Cool White, Advanced
automotive system
Highlights
Powerful brightness
Signaling the intended movement of your vehicle is vital to your safety. To avoid collisions, other people need to know what youre doing. And when poor weather reduces visibility, the need for bright and vibrant signaling becomes even greater. Philips Ultinon Pro7000 LED signaling lights provide you with a bright daylight effect plus up to 7000 K for reversing to improve visibility at the rear. Your car says a lot about you, so make a style statement with Philips LED signaling lights.
Uniform light distribution
For reverse lights, the Philips Ultinon Pro7000 LED gives you uniform light distribution. Its wide angle ensures that the light is projected where you need it.
Uniform light distribution
For your turn indicator, reverse, rear fog and stop signals, the Philips Ultinon Pro7000 LED gives you uniform light distribution. Its 360 angle ensures that the light is projected where you need it. Not only can you see more of the road, but other drivers can also see more of you.
Elegant LED light
While the main goal of exterior lighting is to help you see and be seen, there’s no reason why you shouldn’t look good at the same time. If you’re wanting to upgrade your style without buying a newer car, replacing your exterior lighting with Philips Ultinon Pro7000 LED signals is a smart way to spend your money.
Lifetime of up to 5,000 hours
You want bright, stylish car lights but you dont want to keep replacing failed lamps. That’s a major weakness of conventional bulbs – the more powerful the light, the shorter its lifespan. Even at a higher light intensity, LEDs last much longer. Philips Ultinon Pro7000 LED lights are built to last. Due to features such as high-end LED technology and advanced heatmanagement systems, they last for up to 5,000 hours of operation.
Super-robust lamps with aluminum material
When operating, LEDs generate heat which reduces their brightness and overall lifespan. Philips Ultinon Pro7000 LED lights feature an aluminum heatsink which dissipates heat much faster than the plastic material used by low-cost, inferior-quality bulbs. That makes our lamps more robust and longerlasting.
Ready, steady, installed!
Enjoy the plug-and-play experience: Philips Ultinon Pro7000 LED lights use the same standard caps as the conventional lamps on your car, enabling you to upgrade with no modification needed, so replacement is easy and quick.
Electrical compatibility with most cars and trucks
LED retrofit and conventional bulbs differ from one another in terms of wattage, composition, and power consumption. Replacing your conventional bulbs with other LEDs may prove problematic.
Thanks to the built-in constant IC driver, Philips Ultinon Pro7000 bulbs can work within 9-32 volt systems and are electrically compatible with most cars and trucks. Canbus adapters are available as accessories for troubleshooting if needed. We sell a complete solution.
Polarity-free design
Enjoy the plug-and-play experience: the Philips Ultinon Pro7000 comes with polarity-free design, so you don’t need to worry about the polarity during installation. It will save you time and make installation easier.
Specifications
Marketing specifications
- Product highlight: Polarity-free, Automotive Grade LED, Powerful brightness, Uniform light distribution
- Expected benefits: Brighter, elegant signals
Product description
- Application: Rear fog and reverse lights
- Base: W2,1×9,5d
- Designation: W16W LED white 11067 CU70 12/ 24V X1
- Homologation ECE: NO
- Range: Ultinon Pro7000 SI
- Technology: LED
- Type: LED-T16 [≈W16W]
- Voltage: 12V+24V V
Lifetime
- Life time: 5000 hrs
Light characteristics
- Color temperature: 6000 K
- Lumens: 350lm(12V) 370lm(24V)
Electrical characteristics
- Wattage: 2.5W(12V), 2.7W(24V) W
- Voltage: 12V+24V V
Ordering information
- Order entry: 11067CU70X1
- Ordering code: 72689230
Packaging Data
- EAN1: 6974260726892
- EAN3: 6974260726908
- Packaging type: X2
Packed product information
- Length: 7,0 cm cm
- Width: 2,5 cm cm
- Height: 11,5 cm cm
- Pack Quantity: 1 pcs
- MOQ (for professionals): 10 packs
- Gross weight per piece [g] : 30
Outer pack information
- Length: 19,5 cm cm
- Width: 15,5 cm cm
- Height: 8,5 cm cm
- Gross weight [kg]: 0,36
Customer Support
Issue date 2024-05-11 © 2024 Koninklijke Philips N.V. All Rights reserved.
Version: 3.3.2 Specifications are subject to change without notice. Trademarks
are the property of Koninklijke Philips N.V. or their respective owners.
EAN: 69 74260 72689 2 www.philips.com
Non-ECE compliant
Philips Ultinon Pro7000 SI Car and truck signaling bulb
LED-WHITE [≈W16W] Number of bulbs: 1
12/24V, 6000 K Cool White
Advanced automotive system
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>