MACKIE DLZ CREATOR XS Compact Adaptive Digital Mixer User Guide

MACKIE DLZ CREATOR XS Compact Adaptive Digital Mixer

Product Information

The DLZ Creator XS is a compact adaptive digital mixer designed for podcasting and streaming. It features Mix AgentTM technology, which allows for easy mixing and control of audio inputs and outputs.

Specifications

• RF Power: 20dBm (EIRP)
• Bluetooth Version: 5.0
• Bluetooth Frequency Range: 2400MHz-2483.5MHz

DLZ Creator XS Front & Rear Panel
The DLZ Creator XS has a front and rear panel with various controls and connectors. Here is a breakdown of the different components:

1. Power Button
2. Input Gain Controls
3. Output Level Controls
4. Headphone Jack
5. Microphone Inputs
6. Line Inputs
7. USB Port
8. Bluetooth Pairing Button
9. Main Output Jacks
10. Aux Output Jacks
11. MIDI In/Out Ports
12. Power Input
13. Fan Ventilation

Product Usage Instructions

Setting Up the DLZ Creator XS

1. Place the DLZ Creator XS on a flat and stable surface.
2. Connect the power cable to the power input on the rear panel of the mixer.
3. Connect your microphones or audio sources to the appropriate input jacks on the front panel.
4. If using headphones, plug them into the headphone jack.
5. If connecting to a computer, use a USB cable to connect the mixer to your computer.
6. You can also connect devices via Bluetooth by pressing the Bluetooth pairing button and following the on-screen instructions.
7. Adjust the input gain controls to set the desired volume level for each input.
8. Use the output level controls to adjust the volume of the main and aux outputs.

Mixing and Control
The DLZ Creator XS allows for easy mixing and control of audio inputs and outputs. Here are some key features and functions:

• Use the input gain controls to adjust the volume of individual inputs.
• Use the output level controls to adjust the volume of the main and aux outputs.
• Use the headphone jack to monitor the audio mix.
• Use the USB connection or Bluetooth to stream audio to your computer or other devices.
• Refer to the full owner’s manual for detailed instructions on using specific features and functions.

Troubleshooting
If you encounter any issues with the DLZ Creator XS, refer to the troubleshooting section in the owner’s manual. If the issue persists, contact customer support for further assistance.

FAQ

• Q: Where can I find the full owner’s manual for the DLZ Creator XS?
  A: The full owner’s manual can be found on the Mackie website. Visit www.mackie.com and navigate to the DLZ Creator XS product page to access the manual.

• Q: Can I connect multiple microphones to the DLZ Creator XS?
  A: Yes, you can connect multiple microphones to the DLZ Creator XS using the microphone inputs on the front panel. Adjust the input gain controls for each microphone to set the desired volume level.

• Q: How do I connect the DLZ Creator XS to a computer?
  A: You can connect the DLZ Creator XS to a computer using a USB cable. Simply plug one end of the USB cable into the USB port on the mixer and the other end into an available USB port on your computer.

Overview

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install by the manufacturer’s instructions.

8. Minimum distance (5 cm) around the apparatus for sufficient ventilation. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.

9. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

10. No naked flame sources, such as lighted candles, should be placed on the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods.

14. The MAINS plug or an appliance coupler is used as the disconnect device, so the disconnect device shall remain readily operable.

15. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

16. This apparatus shall not be exposed to dripping or splashing, and no object filled with liquids, such as vases or beer glasses, shall be placed on the apparatus.

17. Operating Temperature: 0˚–40˚ C//32–104˚ F

18. RF Power: ≤20dBm (EIRP)

    • Bluetooth: V5.0
    • Bluetooth frequency range: 2400MHz-2483.5MHz

19. NOTE: This device complies with Part 15 of the FCC Rules [and contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s)]. Operation is subject to the following two conditions:

20. This device may not cause harmful interference, and

21. This device must accept any interference received, including interference that may cause undesired operation of the device.

22. This apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications. Canada ICES-003(B)/NMB-003(B)

23. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
    However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

    • Reorient or relocate the receiving antenna.

    • Increase the separation between the equipment and the receiver.

    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

    • Consult the dealer or an experienced radio/TV technician for help.
      CAUTION: Changes or modifications to this device not expressly approved by LOUD Audio, LLC. could void the user’s authority to operate the equipment under FCC rules.

    • This equipment complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body.

24. Exposure to extremely high noise levels may cause permanent hearing loss. Individuals vary considerably in susceptibility to noiseinduced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a period of time. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the permissible noise level exposures shown in the following chart.
    According to OSHA, any exposure in excess of these permissible limits could result in some hearing loss. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels use hearing protectors while the equipment is in operation. Ear plugs or protectors in the ear canals or over the ears must be worn when operating the equipment in order to prevent permanent hearing loss if exposure is in excess of the limits set forth here:

Correct disposal of this product:
This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE directive (2012/19/EU) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service.

HOOKUP DIAGRAMS

Podcasting

Live Streaming

DLZ CREATOR XS FRONT & REAR PANEL

DLZ Creator XS is not a difficult product to master. However, there is MUCH more to it than may be explained here. Therefore, we strongly encourage you to review the full owner’s manual on the Mackie website should any additional questions arise.

1. Power Connector Connect the supplied power adapter to this jack and turn the outer ring clockwise to lock.
2. Power Switch Turns the DLZ Creator XS on and off.
3. Combo Inputs Connect a mic, instrument or balanced or unbalanced line-level signal using an XLR or 1/4″ connector.
4. Stereo Line Inputs Connect stereo balanced line-level signals using 1/4″ connectors.
5. 1/8” Stereo Input Connect a 1/8″ line-level signal from a smartphone, MP3 player, or other signal source.
6. USB I/O An interface allowing you to stream audio to and from the DLZ Creator XS via computer. Connect the USB-C side of a USB cable to the DLZ Creator XS and the USB-A side to the computer’s USB port.
7. Speaker Out L/R Connect to the inputs of speakers.
8. Phones Jacks Connect stereo headphones here.
9. SD Card Slot Insert an SD card to allow recording/playback.
10. USB A Connect a flash drive and record directly.
11. Network Connector Connect to a router via a shielded network cable that is Cat5 or better for streaming audio over Ethernet.
12. Solo Switch Allows you to listen to individual channels singly or in combination with other soloed signals. The button illuminates if the solo switch is engaged.
13. Mute Mutes the channel signal. The button illuminates if the mute switch is engaged.
14. Channel Knob Adjusts the level to the main mix.
15. Sample Pads Channel Knob Adjusts the level of the sample pads to the main mix.
16. Sample Pads Press a pad to play the saved sample. The pad illuminates during playback.
17. Quick Control Knobs Rotate these encoders to change the currently selected parameters.
18. Home Press the HOME button to return to the main mixer view.
19. Record Press the REC button to begin the recording process.
20. Auto-Mix Press the AUTO-MIX button to quiet unused channels and select the priority of ones that are in use.
21. Display Where you will view everything from levels and meters to effects and settings.

GETTING STARTED

1. Read and understand the Important Safety Instructions.
2. Turn all the knobs fully down.
3. Connect the locking barrel connector of the Power Block to the mixer and rotate the outer ring clockwise to lock. Push the line cord securely into the Power Block and plug the other end into a grounded AC outlet.
4. Turn the DLZ Creator XS on.
5. Please be patient as the system and its parameters load up.
6. Choose a work mode. We recommend starting with ‘Easy’.
7. Ensure that the Setup Assistant is toggled on and click ‘Next’.
8. Follow the on-screen instructions.
9. Raise and lower the input and output volumes to a comfortable listening level.
10. Switch to Standard or Pro mode for access to additional parameters.
11. Add presets, EQ, FX, etc. to taste.

TECHNICAL SPECIFICATIONS

System Latency: ~3 ms
Inputs| 2x balanced/unbalanced combo jacks, 1/4″ balanced stereo jacks, 1/8″ stereo jack
Outputs| Balanced/unbalanced 1/4″ main out jacks, 2x stereo headphone jacks
Bluetooth| 5.0

USB

| Format: USB 2.0 HS (480Mb/s)
SD| Multitrack (6 chan + main mix) / 24-bit / 48kHz SD speed class 10 or speed class UHS recommended.
Power Requirements| 18V = 1.5A
Size (H × W × D)| 3.3 × 10.2 × 8.0 in
83 × 260 × 204 mm
Weight| 2.6 lb
1.2 kg

All specifications subject to change

WARRANTY AND SUPPORT

VisitWWW.MACKIE.COM to:

• Identify WARRANTY coverage provided in your local market. Please keep your sales receipt in a safe place.
• Retrieve a full-version, printable OWNER’S MANUAL for your product.
• DOWNLOAD software, firmware and drivers for your product (if applicable).
• REGISTER your product.
• CONTACT Technical Support.

Contact Information

• 19820 NORTH CREEK PARKWAY #201 BOTHELL, WA 98011 USA.
• Phone: 425.487.4333
• Toll-free: 800.898.3211
• Fax: 425.487.4337

Part No. 2056540 Rev. B 11/23 ©2023 LOUD Audio, LLC. All Rights Reserved. Hereby, LOUD Audio, LLC declares that the radio equipment type [DLZ CREATOR XS] is in compliance with Directive 2014/53/EU.

The full text of the EU Declaration of Conformity and Bluetooth conformity are available at the following internet address: https://mackie.com/en/support /drivers-downloads?folderID=27309.

www.mackie.com.

References

• MACKIE
• Drivers/Downloads | MACKIE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>