ricoo TV D0122 Monitor Mount Instruction Manual
- June 12, 2024
- ricoo
Table of Contents
**ricoo TV D0122 Monitor Mount Instruction Manual
**
Warning : Do not exceed listed load weight. Property damage oder serious injury may occur!
Please check BEFORE installation distance between VESA mounting holes on
your display!
This screen mount supports VESA hole distance in the minimum and maximum
distance ranges given above.
VESA – Hole distance = Distances between the mounting holes on the screen
back
Scope of delivery
**** We recommend using a professional level.
**** The numbering on the plastic bag may differ / missing completely!
NOTE: READ THE ENTIRE INSTRUCTION MANUAL BEFORE YOU START INSTALLATION AND ASSEMBLY
Please note: Images in these assembly instructions are only technical presentation of the product. Actual product design may vary minimally.
Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet. If you have any questions regarding any of the instructions or warnings, please contact your local distributor. This product was designed to be installed and used ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury. This product may only be assembled / installed by the technical staff. Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components. Always use an assistant or mechanical lifting equipment to safely lift and position the equipment. Make sure that before and after the installation of the product neither you nor somebody else can be injured and other objects can be damaged. In case of doubt request for help from an expert. This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury. Tighten screws firmly, but do not over tighten. Over tightening can cause damage the items, this greatly reduces their holding power.
By reason of large television construction types on the market, we can’t adjust our screen installation materials for each screen type. Therefore it is possible that the screws which are numerously delivered don’t fit with your TV/Monitor. We ask for your understanding that we can’t cover up all possibilities of many screen types.
Each wall is built up of different materials which can result a special
requirement. Therefore we are concentrated on the delivery of installation
materials only for mass concrete walls.
Use our included installation accessories only for mass concrete walls.
When mounting on the wooden beams wall, make sure that the fastening screws are anchored in the center of the beams. It is highly recommended to use a beamfinder. If your walls have a special demand of materials, we advise you to ask in an expert shop for a suitable acquirement of the installation materials.
Assembly Instructions
Warning: Supplied plastic anchors are only suitable for solid concrete walls!
****Use the matching screws and spacers for your display
**** Use the matching screws and spacers for your displa
**** If the screws “”M-D” are too long, use the plastic spacers “M-G”. (like in Step 4 A)
by loosening or tightening the screws with the correct Allen key (C).
To adjust the height, loosen the screw shown and align the screen accordingly.
Once the height is adjusted, retighten the screw firmly.
This ceiling mount has a turning function that allows you to turn / swivel the front panel including the mounted screen 45° to the left or right. Thanks to special technology, you can turn the bracket with your hands without much effort, without having to loosen the screws. As a rule, the fixing screws are already set at the factory in such a way that the rotation can be carried out without any problems. If you notice that the turning function is difficult, you can loosen the two screws shown minimally. With these screws you can adjust the smoothness of the turning function.
If required, you can fold the ceiling mount with the screen for saving space. To do this, push the screen back to the construction until it locks at the top of the wall plate.
For folding out the ceiling mount press the screen against the ceiling, the locking mechanism will be unlocked so you can fold out the mount with the screen.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>